Loosing HR during workout

Gabriela Ziemba

I have S9 non Baro.
So we have tested a little bit and here are some results. We did jumping rope for 5 min.

Me + mine S9 + no belt

= HR biggest drop 114 to 142 in one second.
Me + mine S9 + HR strap

= HR much more stable, biggest drop 164 - 147 in one second
Me + his spartan + no belt

= HR very stable, no drastic drops at all
He + my S9 + no belt

= while jumping he noticed drop 180 - 112 in 10 seconds, and HR was still low even when he was breathing hardly.

It looks like his spartan is much better for measurement, even without belt? We have an old belt, I could change battery and make it fit better. But I still think that mine S9+no belt vs his spartan+no belt is huge difference

What do you think guys?

freeheeler

@Gabriela-Ziemba
#2 looks like small downspikes caused maybe by tesla from a sport shirt?

personally I would recommend to use an external HR, either belt or OH1

A Former User

@Gabriela-Ziemba intressting. Would try a more surrounding wrist band. And keep shirt away from wrist-watch-contact

sartoric

@Gabriela-Ziemba
Which Spartan model is it?
Check if there are visible differences when you wear it.
I mean contact surface on the wrist etc. Also when you move you arm.

You can also try to wear it on the other arm.

For sure the belt is a viable solution.

Gabriela Ziemba

@TELE-HO I wear almost only quick dry t-shirts so it could definitely be the reason, I read about it now, would never ever think about it, I’m new into HR belts. Thanks!

Gabriela Ziemba

@mountainChris do you have any suggestions that would be good for S9 non Baro? Thanks!

Gabriela Ziemba

@sartoric
That’s his watch. His watch strap feels definitely much more comfortable than mine, it feels like there is no space bwetwen skin and watch. Mine feels not the same way.

Brad_Olwin

@Gabriela-Ziemba For me the OHR on the Spartan and S9 is problematic. It works in the gym, sitting, hiking but is poor for running and trail running. The only solution that works for me is to actually wear the watch almost on my forearm. Most of the time I wear the Suunto smartsensor belt.

Gabriela Ziemba

@Brad_Olwin I understand, I will get my boyfriends old HR belt ready (change battery, check resistance in pads etc.) and hopefully write a quick note how did running on Friday go.

Hope this can help others with same struggle. Thank you all, this helped a lot!

A Former User

@Brad_Olwin for me OHR works well on S9 during running trailrunning (in 95% of all cases)

Brad_Olwin

@mountainChris The trails I am on are quite technical, every downhill the watch moves enough that it locks onto cadence for HR, I cannot tighten it enough. If I wear the watch on my forearm it generally works, (a full hand above my wrist). The S7 does not have this problem…

Gabriela Ziemba

As promised, but with a delay - stats from running. It looks much better with HR belt. Simply, I get much more polite notifications when running in HR zones.

Thanks again for all replies!

tomahawk5000

Hey Gabriela, what kind of belt do you have?

Gabriela Ziemba

@tomahawk5000

Seems to be suunto smart sensor, like the one in the picture.

Brad_Olwin

@Gabriela-Ziemba Wow, was that a har run??? You spend a lot of time in zone 4 and 5. If this wasn’t a super hard run, I think your zones are off.

Egika

The only way to get somehow reliable wrist HR data from my S9 is to have it not too loose (wobbling and shaking around) and not too tight (cutting off the blood flow).
Then I wrap a buff in an 8 over and below the watch to keep it more steady.
This way it can work.
Strap still is superior…

Brad_Olwin

@Egika said in Loosing HR during workout:

The only way to get somehow reliable wrist HR data from my S9 is to have it not too loose (wobbling and shaking around) and not too tight (cutting off the blood flow).
Then I wrap a buff in an 8 over and below the watch to keep it more steady.
This way it can work.
Strap still is superior…

Agreed, the problem I have with the buff is it often covers the baro sensor and I get wildly bizarre altitude readings. I have quit using the buff and now use a long strap, preferably the velcro strap (I often wear two watches on one arm and the velcro is the only one that will keep the watch in place without slipping).

freeheeler

@Brad_Olwin said in Loosing HR during workout:

covers the baro sensor and I get wildly bizarre altitude readings

phuu… I’m glad I’m not chasing ghosts

Gabriela Ziemba

@Brad_Olwin I wanted to stay in zone 3, but I guess I lost control at some point running was always hard for me so I decided to improve

ldxmsg

Sorry to awaken an old thread but I’m getting increasingly erratic HR readings using my S9B. I’ve not changed anything, use an official Suunto silicon strap and tighten the watch so that it doesn’t wiggle when running. For the first 10 mins or so of every run my HR shoots up to 160s (my resting rate is 60-70, and a hard run is in the 170s), regardless of how fast or slow I go. It will settle but takes some time. For instance, I ran for 25 mins with my son and dog yesterday and it was extremely comfortable, not out of breath and chatting the whole way, yet my HR readings were very high, which I find hard to believe. I’m not religious about these things, and am not interested enough to warrant wearing a belt/sensor, but I’d still expect better readings. My S7 and Garmin Tactix are usually consistent, and the S9B was better but has been getting worse lately. Anyone else having problems? Screenshot of the HR readings below: