Backlight
-
@vio112 it’s not a stupid question. I have never done this before myself.
Some people on this forum update their watches by downloading the zip file and then dragging and dropping it into Suunto link. I thought maybe it would also be possible to do this procedure with an older firmware zip file to perform a downgrade.Suunto Vertical Titanium Solar
OnePlus Nord 4 -
@surfboomerang if someone enlight as how to do this, it would be great. I would give it a try to see what battery impact it will have. Since now I use backlight few seconds a day (via toggle usually at night), with rise to wake it will be probably minutes a day. But with possibility to get back to older firmware it will be no risk. Now I charge once per week (every 7 days) and I would like to keep it that way.
-
@surfboomerang @Tomas5 Yes, you can install basically any firmware for your watch by dragging the zip file on the gear icon in Suuntolink. Be careful with Macs, they sometimes unzip the file automatically.
-
I also would like we could disable backlight when a notification is received.
-
@surfboomerang if someone enlight as how to do this, it would be great. I would give it a try to see what battery impact it will have. Since now I use backlight few seconds a day (via toogle usually at night), with rise to wake it will be probably minutes a day. But with possibility to get back to older firmware it will be no risk. No I charge once per week (every 7 days) and I would like to keep it that way.
one have to know what is S5 nickname (ibiza for S9B, amsterdam for SSU, etc…), then someone should find and share the proper nickname FW zip file (maybe already on this forum) that allows S5 and this famous toggle mode, and finally, Suuntolink will allow you to drag and drop this zip file on it to install this downgrade FW version (with all risks of a FW installation).
-
@mff73 thanks, sounds good, just to find right zip file
I will give it a try. -
@vio112 can you tell in few days/weeks if there is significantly higher battery usage with raise to wake instead of toggle ? Thanks.
-
@tomas5 The Suunto’s all have city’s names internally in development.
‘Amsterdam’: ‘Suunto Spartan Ultra’,
‘Brighton’: ‘Suunto Spartan Sport’,
‘Cairo’: ‘Suunto Spartan WHR’,
‘Forssa’: ‘Suunto Spartan Trainer’,
‘Gdansk’: ‘Suunto Spartan WHR Baro’, ‘Suunto Spartan Sport Wrist HR Baro’, ‘Suunto Spartan WHR Baro’,
‘Helsinki’: ‘Suunto 3 Fitness’,
‘Ibiza’: Suunto 9 Baro
‘Lima’: Suunto 9
‘Monza’: Suunto 5For Suunto5 you get the 2.10.26 FW like this:
http://firmware.geo.movescount.com/production/Monza-fw_2.10.26.1047-J.zipand the 2.12.30 version:
http://firmware.geo.movescount.com/production/Monza-fw_2.12.30.1410-J.zipt6, S6, Elementum Terra, Ambit 3 Sapphire, Spartan Ultra Copper, Traverse Alpha, S7 Graphite LE, S9B Ambassador, S9P Granite Blue Titanium, S9PP Titanium Sand, Vertical All Black, Race Titanium Charcoal,
Race S All Black - TI Canary - Titanium Courtney -
@tomas5
I would like to, but I definitely stop to use it as daily watch because of this backlight issue and because of no option to disable touch screen which has very big issue in water which means that you can not use them properly in water - shower, pool and sea and it has also significat impact on battery life https://forum.suunto.com/topic/6553/manual-lock-of-touchscreen-in-time-mode-s9baro
Therefore I am not good person to test it, I use them only for sport activities, otherwise I do not wear my S9B and they just laying down on my working table.
Therefore I would like to immediately downgrade it because it will solve this backlight issue.
-
@egika
Woow, nice and thank you so much. -
@egika thanks, do you know how to get last 4 digits of my current firmware? I have 2.14.16 and if i give a try to new one, i would like to return back to this current version.
-
@vio112 next week this firmware will be released for suunto 5, so now when i have backup plan
i will test it myself without worrying. If it reduce battery life i will downgrade .P.S. touch screen lock is reason i bought Suunto 5 and not Suunto 9 because it would drive me nuts.
-
@egika thanks, do you know how to get last 4 digits of my current firmware? I have 2.14.16 and if i give a try to new one, i would like to return back to this current version.
the last 4 digits are the same for everyone per watchmodel/FW version released in production.
if you have 2.12.30 on your S5 watch, you should/must have FW Monza 2.12.30.1410-J. -
@mff73 yes but i don’t have 2.12.30 but 2.14.16 and Monza-fw_2.14.16.1410-J.zip doesn’t exists. So number 1410 should be replaced for some another i think.
-
@tomas5
Current FW should be this one:
https://firmware.geo.movescount.com/production/Monza-fw_2.14.16.1591-J.zipyou can check if you find your current file here:
C:\Users\USER\AppData\Roaming\Suuntolink\ -
@egika thank you very much
-
Update was released, so i can test battery life. Now backlight is enabled on every button press. Really curious how it will drain battery.
-
I really really dislike this “feature”. The toggle function was much better. So please update me, if the downgrade worked @vio112
Thanks!But why does the “backlight on / off” function is still in the quick menu? It has then no function…
-
@theguyfromthesummit it has a function. It runs the backlight on , not the standby light on.
Community Manager / Admin @Suunto
Creator of Quantified-Self.io
youtube.com/c/dimitrioskanellopoulos
https://instagram.com/dimitrioskanellopoulos
https://www.strava.com/athletes/7586105 -
In my case not, or I do sth wrong.
Backlight: low
Standby: off
Raise the wake: off
Do not disturb: offquick menu backlight: on/ off does not change anything
Light is only on, when I push a button (so like standby was before the update) and the old tab to toggle on/ off does not workBacklight: low
Standby: on
Raise the wake: off
Do not disturbe: offquick menu backlight: on/ off does not change anything
No matter what I do, the light is always on.
