Software Update 2.40.38 (2025 Q1)

[Artus Diver]

@Devis said in Software Update 2.40.38 (2025 Q1):

Hello,
yesteday I swam in the pool (25m) for about 60 lengths and the Race S estimated a total distance of 1500 m .

I pushed the down button to mark a lap at the end of every length (but I did it only for the first 50 lengths).
From the first, up to the 10th lap, I swam freestyle (a length) and then return in backstroke (a length), five times.

Here what the Race S tracked. I underlined what I think it is not correct.

Thanks for any comment.

I have a Suunto Vertical and swimming in the pool after the latest updates is a nightmare!
It counts the distance incorrectly, LAP after 100m shows 75m and confuses swimming styles (…) It divides 100m sections into 2x50m (…)

The new algorithm has extended the time of laps approval from 4 seconds to 10 seconds. For recreational swimming it does not matter but if someone trains, the algorithm gets lost in fast and intensive intervals!
I do not know why such changes?

I am forced to go back to swimming with Suunto 9 Baro and I have no problems, everything works perfectly!!! Why can’t stick with the old algorithm?

[Dimitrios Kanellopoulos]

@Artus-Diver I see the post

[Dimitrios Kanellopoulos]

@Devis What is the problem with the 50m red circles ?

[Alastair Polden]

I can no longer connect my vertical watch to WiFi. It was previously working. Steps I have taken to rectify:
Disabled 5ghz WiFi
Restarted router
Restarted watch
Restarted phone

The last step to try is a hard reset of the watch but if I’m unable to reconnect to WiFi, I will have lost the downloaded maps i currently have on the watch.

Software 2.40.38
Model 0w222
Hardware 3211e2
PPG 0.4.65
Wlan v000052

[runomatic]

Bug or feature (to save battery)? The widgets of the Vertcial’s standard watchface (in my case “Ressources” and “Solar”) no longer update automatically. Only when I press the middle button does the value adjust.

[Jan Suchánek]

@timecode Thanks! I was thinking about that. So it only shows the zone. In this case, it could be smaller, just show color and left space for another complication… But I can live with that for sure :-).

[fedequei]

@Jan-Suchánek I have the same problem

[Matthias Jäggli]

@pavel-samokha And everytime something updates. it resets the watch face and it’s colors and complications. PLEASE leave this alone, it’s so annoying

[pilleus]

Air pressure complication doesn’t change the horizontal arrow despite of increasing air pressure (1014 to 1024 hPa within 12 hours).

On Vertical and 9PP with the choosen watchface.

[sartoric]

@pilleus
baro trend shows 2 X 3 hours timeframes and there should be a threshold I don’t remember at the moment.

It works ok on my Vertical

[runomatic]

@pilleus That is the same bug as mine, i suppose. (2 posts above yours)

[pilleus]

@sartoric said in Software Update 2.40.38 (2025 Q1):

@pilleus
baro trend shows 2 X 3 hours timeframes and there should be a threshold I don’t remember at the moment.

It works ok on my Vertical

No change since the update. Always the ️ arrow despite the steady increase from 1014 to 1024 hPa within 12 hours. There should be a arrow showing ️

[Inge Nallsson]

@Dimitrios-Kanellopoulos said in Software Update 2.40.38 (2025 Q1):

@Devis What is the problem with the 50m red circles

I believe the confusion comes from an issue I layed out in the posting https://forum.suunto.com/post/164067 (Several swim issues and questions). Whether being, as @Artus-Diver calls it, a ‘recreational’ swimmer or doing more of a ‘training’ session we users expect that pressing the supposed ‘Lap’ button will mark the distance since a previous button press AND give the exact timing between the presses.

But, as I showed in the linked posting, the ‘Lap’ button does (probably) not effect the timing at all and is just a means of summarising the automatic “Interval” counting the watch does by itself. It is thus very likely that a ‘recreational’ swimmer (pushing the ‘Lap’ button for every length *) will experience 0 metres lengths or, as in this case, 50 metres while expecting 25 because the the automatic counting easily is disturbed by slowing down or faffing with the watch or less than stellar push-offs. Remember, a ‘Lap’ button press is in no way decoupled from the automatic “Interval” counting.

• Many ‘recreational’ swimmers count lengths instead of metres and therefore rely on the ‘Lap’ button doing the logical thing, i.e. in a 25m pool mark 1 length and that being 25 metres. The concept of automatic “Interval” counting (of varying lengths) is for them profoundly alien.

[pilleus]

@pilleus said in Software Update 2.40.38 (2025 Q1):

@sartoric said in Software Update 2.40.38 (2025 Q1):

@pilleus
baro trend shows 2 X 3 hours timeframes and there should be a threshold I don’t remember at the moment.

It works ok on my Vertical

No change since the update. Always the ️ arrow despite the steady increase from 1014 to 1024 hPa within 12 hours. There should be a arrow showing ️

Now the air pressure is falling, the value in the complication is correct, the little arrow above is still ️.

I tried different watchfaces, no difference. Both watches, Vertical and 9PP have been resetted to factory settings after the update.

[Artus Diver]

@Inge-Nallsson said in Software Update 2.40.38 (2025 Q1):

@Dimitrios-Kanellopoulos said in Software Update 2.40.38 (2025 Q1):

@Devis What is the problem with the 50m red circles

I believe the confusion comes from an issue I layed out in the posting https://forum.suunto.com/post/164067 (Several swim issues and questions). Whether being, as @Artus-Diver calls it, a ‘recreational’ swimmer or doing more of a ‘training’ session we users expect that pressing the supposed ‘Lap’ button will mark the distance since a previous button press AND give the exact timing between the presses.

But, as I showed in the linked posting, the ‘Lap’ button does (probably) not effect the timing at all and is just a means of summarising the automatic “Interval” counting the watch does by itself. It is thus very likely that a ‘recreational’ swimmer (pushing the ‘Lap’ button for every length *) will experience 0 metres lengths or, as in this case, 50 metres while expecting 25 because the the automatic counting easily is disturbed by slowing down or faffing with the watch or less than stellar push-offs. Remember, a ‘Lap’ button press is in no way decoupled from the automatic “Interval” counting.

• Many ‘recreational’ swimmers count lengths instead of metres and therefore rely on the ‘Lap’ button doing the logical thing, i.e. in a 25m pool mark 1 length and that being 25 metres. The concept of automatic “Interval” counting (of varying lengths) is for them profoundly alien.

Good morning,
I hope I haven’t offended anyone with the term “recreational swimming”, if so that was not my intention, I apologize.
Of course I practice sports swimming but I often use other swimming techniques and the LAP button to mark laps, e.g. for exercises without hands.

By the way.

@Dimitrios-Kanellopoulos even when LAP works it still doesn’t give the length and it was already implemented in the Suunto AMBIT 3 PEAK model!!!

I don’t understand what the problem is to restore such functionality?

@Dimitrios-Kanellopoulos I’ve been using your products since 2001 (I swim, dive) and I don’t remember such a mess with the swimming algorithm!

(SA3PEAK, S9B, SV until update 2.39.20 later it’s despair).

Yesterday I sent the SV to the service because maybe it’s a watch defect? ​​I’m curious about the service opinion.

Back to the topic.
I proposed dividing it into two disciplines only because the current algorithm does not satisfy either competitive or recreational swimmers.

[Dimitrios Kanellopoulos]

@Artus-Diver No offence. But in theory no need to press the lap button. I ll be reporting this so at least it works as expected.

Thanks for your time friend

[Artus Diver]

@Dimitrios-Kanellopoulos said in Software Update 2.40.38 (2025 Q1):

@Artus-Diver No offence. But in theory no need to press the lap button. I ll be reporting this so at least it works as expected.

Thanks for your time friend

Thank you for your help and support.

By the way, I have one more observation.

When performing very fast “sprints” of 100m butterfly stroke less than 8 strokes, the lap (25m) is not counted.

This occurs when swimming underwater for a long time (30% or more of the length of the 25m pool), which consequently shortens the number of strokes above the water.

[Inge Nallsson]

@Artus-Diver How to separate different users of the water medium is indeed hard. In Swedish we only have “Competition”-swimmers (Tävlingssimmare) and then the rest goes under the general term ‘bathers’ (badare). There is no ‘recreational’ swimmer, which would then be ‘fritidssimmare’… Swimming outside of work, school… In your “fritid”, free time

Regarding the ‘Lap’ button: For now it should be widely spread that it only marks the ENDING of the last totalled automatic lap counting. And because of this you get things like 75 metres (when manually lapping a 100) since the last 25 has not been registered by the automatics and added to the sum yet.

Edit: Our lanes seperated from the general ‘bathing’ area at the pool are labeled to be used for “Motionssimning”, that would be ‘Exercise swimming’ or ‘Work out swimming’ in english.

[karmazynowycukiereczek]

@pavel-samokha said in Software Update 2.40.38 (2025 Q1):

Improved turn-by-turn notification logic

Didn’t this used to be set in the phone app? Where can I find this feature now?

[Inge Nallsson]

@Dimitrios-Kanellopoulos said in Software Update 2.40.38 (2025 Q1):

@Artus-Diver No offence. But in theory no need to press the lap button. I ll be reporting this so at least it works as expected.

There is no need to press a ‘Lap’ button in casual use, but real life gives ample situations where we do. One is the recreational swimmer as cited above, a second is to have more precise control over registered times/laps and a third, since Suunto doesn’t have a drill mode, to mark portions where we use no arms or perhaps only a single arm.

To accomplish expected behaviour Suunto need to give the ‘Lap’ button priority also in the watches Swimming mode so that a press gives a timestamp (by itself, decoupled from automatics) plus distance and in effect ends any automatics going on. Or something in that ballpark… I’m no algorithm writer! (Though I appreciate how hard it must be to satisfy all user cases).