getting too much ascent / descent on flat routes

[GiPFELKiND]

@Dimitrios-Kanellopoulos thank you for your information.

[GiPFELKiND]

@Dimitrios-Kanellopoulos said in getting too much ascent / descent on flat routes:

@GiPFELKiND you barometer had noise and ups and downs. So this is not due to the update fyi. WE analyzed the data.

What can i do now? Where the noise is come from? My Sensor is Clean. Thank you for your informations about this

[Dimitrios Kanellopoulos]

@GiPFELKiND nothing. It could be one off or just some water before. If it persists then pm me.

[Dimitrios Kanellopoulos]

@MatthiasKlug the fused alti has not been touched. This is expected and it’s ok for 3m. For the time being that is.

[runomatic]

@GiPFELKiND I’ve always had this happen (with both SUUNTO and Garmin watches) when I run along the beach on a North Sea island. It varies depending on the wind and weather. The stronger the wind, the greater the altitude. The barometer seems to get a bit confused.

[MatthiasKlug]

@Dimitrios-Kanellopoulos …
but … but … but - it was better before
(and now i can no longer mock the guys that have ascent on a track…this makes a bit sad)
If this is expected, i will be tolerate this expectaion, but still sadly I konw that suunto can do better.
Anyway thanks for your effort on that end.

(edit: my first thought was that this behaviour is somehow temperature related (the bigger the temperature drop the higher the ascent) i just wanted to mention this, we will see if the outer temps get warmer and closer to the changing room, so there is less temperature drop)

[HonzaS]

Just returned from first run after few months. I tried 5km track run activity on 200m oval 2nd lane, so 208m but that that’s not important. I got 15m descent even on flat track. Don’t know, if it was better before 2.50.26 FW, but according to charts, it seems temperature correlated. At home, I put the watch on jacket sleeve, so the watch temperature was gradually decreasing outside, but not to ambient temperature, which was about 1°C. And the elevation chart curve seems to copy the temperature chart.

[Sportsfreund]

@GiPFELKiND Switch off the Baro Mode.

[GiPFELKiND]

@Sportsfreund you can not switch off the Baro mode

[Sportsfreund]

@GiPFELKiND Das konnte man doch mal wählen. Finde die Einstellung auch nicht mehr.