Suunto Spark

Egika

@snow so there are no running metrics that recent watches don’t have.
I see no need to record an activity with phones and watch at the same time.

Using the phones to record a run makes sense to me, when you are not using your watch.

Tieutieu

@Egika you’re right recent watches have those metrics ; not my SRs neither my SV1 (unless I missed something). So using the sparks and having those metrics in my activities would had been a plus.
But I didn’t bought the spark for that so not a big deal to me

dreamer_

@Egika those running metrics are far superior in something like the head than in very moving one arm. It is explained in that video. That is also a reason with PODs exist in other brands or chest straps with POD features. And pod features could also be improved in a future firmware update.

An analogy is running with an HR chest strap. It’s better than the wrist sensor and if you are running with the strap, is because you do want the metrics of the strap. It has no sense to have 2 activities in that scenario. Watch’s metrics should be avoided when running with the Spark paired (in my opinion the contrary is clearly a bug once you have both products in the same workout)

Audaxjoe

Quick question for users, the advertised battery life is a bit short for some of my activities.

I notice it gives two figures for battery usage in the marketing blurb, so is it easy to charge with the case? I.e at a food stop without power? Or does it only charge when the case is plugged in?

Squirrel

@Audaxjoe Not a user, but in theory, the case could charge the buds 4x.

Section 6.2 (page 14)
https://cdn.shopify.com/s/files/1/0645/6488/7733/files/Suunto_Spark_EN_User_Guide_20260330.pdf?v=1775183859

Speed Man

I can’t tell which is more accurate between Running Dynamic and Suunto Spark on the watch, so I’m not confident enough to speak about it.

Horizontal_2

How are your headphones doing? I’m looking for new ones and I have a 15% discount at Suunto. It’s tempting

Glasses: I run a lot with glasses or sunglasses. How are they coping with your ears when you use them for hours?
Traffic: The upside is the downside for boneconducting. You can’t hear your music at all when at traffic. Is this better executed by the open ear of the Spark?

dreamer_

@Horizontal_2 just one thing. The 15% discount of the Strava challenge is not valid for the Spark, if that’s the case.

Horizontal_2

@dreamer_ It isn’t? Never mind then

I can’t find information about that

dreamer_

I did not comment but I’m testing my Spark. So feedback post:

Sound quality is really good.
Build quality is very nice. They feel really premium.

Not so good things:

The touch is too sensitive. I have disabled by default the “one click”
Audio notifications are exactly the same as without the Spark. I knew that, but I didn’t expect the latin american spanish for Spain.
Metrics are not integrated with the watch.

I think the S+ app should have two more options:

An option to toggle on/off things like navigation audio indications, so users can decide if they want the navigation audio indications (which are very useful in several cases). For that, Suunto should implement the feature (which is still missing).
An option to toggle on/off to use the metrics taken from the Spark’s pedometers in the main activity in the watch. I mean, to not have 2 activities in the app (watch and spark). Something similar that what happens when you are using a chest/arm strap. Only one activity with the much better bpm taken from the chest/armstrap, not two activities. Something similar happens here with the Spark, since you have 2 additional pedometers that are going to work a lot better than something that is taken from a watch that is in one moving arm.
For someone that made the effort of buying the Spark, I see this as an important software bug that should be solved. Having 2 individual activities has not sense (at all).

Ideally:

Go further with a firmware update for using the pedometers of the spark for indoor/treadmill runs, if possible of course.
Things like voice notes while on workout (if possible).

Just those little things for making the Spark a must and a perfect companion.

dreamer_

I’m noticing a bug in the Spark.
When there’s an autolap (I.E, when you complete a kilometer), I’m hearing the bpm feedback in latin american spanish and the autolap information in english and both audios are overlapped. You hear both at exactly the same time and in different languages.
This is very weird.

dreamer_

About this. In other languages, does anybody have the same bug? It is very disappointing to hear both audios at the same time (and even in different languages)
@egika or someone. Could this be reported internally for a fix? I understand this should be critical (for the team that develops the headsets firmware)

It’s like the headsets are incredible well done but the software needs more work (I.E, not only this bug but the integration should be really there)

The touch is too sensitive too. Even the doble touch happened to me while running.

I understand fixes with improvements will come since the product is very new yet.

dreamer_

Setting watch’s language in English , there’s no audio overlap for autolaps when a kilometer is completed (like it happens when setting the watch in Spanish)
Can anybody test other languages? My guess is that autolap notifications are overlapping languages when English is not set in the watch

Btw. I’m noticing that even English sounds a bit unnatural. It’s like digits or words are recorded one by one so it can be used to make the sentences.

massimo trinchieri

@dreamer_ anche io avevo lo stesso problema della sovrapposizione audio, ora non lo fa più ma comunque non dà la metrica di corsa in tempo reale come annunciato. Se faccio partire le cuffie dall’app registra i dati con un file a parte ma non integrato nell’allenamento del race 2

dreamer_

@massimo-trinchieri said in Suunto Spark:

@dreamer_ anche io avevo lo stesso problema della sovrapposizione audio, ora non lo fa più ma comunque non dà la metrica di corsa in tempo reale come annunciato. Se faccio partire le cuffie dall’app registra i dati con un file a parte ma non integrato nell’allenamento del race 2

So basically, Italian has the same issue as Spanish with the overlapped audios in English. This is important.

Can anybody contact Suunto?
Thanks

Роман Баранцев

@dreamer_ The problem lies in the simultaneous work of the suunto assistant and the Google assistant. Probably available in all languages.

dreamer_

@Роман-Баранцев said in Suunto Spark:

@dreamer_ The problem lies in the simultaneous work of the suunto assistant and the Google assistant. Probably available in all languages.

The thing is that both audios are happening at the same time. It’s super weird. And if you configure the watch in english, the issue is gone.

dreamer_

I mean, with the watch in Spanish (without touching anything in the phone), the issue is there. With the watch in English there’s no issue.

I’m not sure about these headshets. I expected better firmware. There’s no integration either and touch is too sensitive. Physical buttons are much better while running in my opinion.

dreamer_

said in Suunto Spark:

I did not comment but I’m testing my Spark. So feedback post:

Sound quality is really good.

Build quality is very nice. They feel really premium.

Not so good things:

The touch is too sensitive. I have disabled by default the “one click”

Audio notifications are exactly the same as without the Spark. I knew that, but I didn’t expect the latin american spanish for Spain.

Metrics are not integrated with the watch.

I think the S+ app should have two more options:

An option to toggle on/off things like navigation audio indications, so users can decide if they want the navigation audio indications (which are very useful in several cases). For that, Suunto should implement the feature (which is still missing).

An option to toggle on/off to use the metrics taken from the Spark’s pedometers in the main activity in the watch. I mean, to not have 2 activities in the app (watch and spark). Something similar that what happens when you are using a chest/arm strap. Only one activity with the much better bpm taken from the chest/armstrap, not two activities. Something similar happens here with the Spark, since you have 2 additional pedometers that are going to work a lot better than something that is taken from a watch that is in one moving arm.
For someone that made the effort of buying the Spark, I see this as an important software bug that should be solved. Having 2 individual activities has not sense (at all).

Ideally:

Go further with a firmware update for using the pedometers of the spark for indoor/treadmill runs, if possible of course.

Things like voice notes while on workout (if possible).

Just those little things for making the Spark a must and a perfect companion.

About the voice things. Garmin, Amazfit and since this May, now Coros are working seriously on this.

This is Coros’ May update:
https://eu.coros.com/stories/coros-metrics/c/may-2026

It is very interesting for several scenarios (I.E, running with gloves in winter but see Coros notes). I think the Spark have a lot of potential here and Suunto should really think in the integration as an ecosystem. There are many use cases considering also the integrated pods.

There’s a lot of marketing with these things, but at the end Suunto is behind the rest and the integration thing is somehow super interesting considering Suunto has it’s own headsets.

scotta

Anyone have issues pairing a Spark with an iPhone? I have an iPhone 17 running iOS 26.5. After pairing, the Suunto App status for the Spark initially shows a green check, but after 2 seconds shows a yellow dot. When clicking on the Spark icon to configure the Spark, it will initially show the left Spark, case, then right Spark. After 2 seconds one of the Sparks gets greyed out, the case may go grey as well, but not always - It changes. When looking at button customization, the Spark that is greyed out shows a circle/exclamation mark. Says it is not connected.

I’ve tried forgetting the Spark from my phone, resetting the Spark, deleting and reinstalling the Suunto app, repairing, nothing works. Same behavior on my iPad. I contacted support who were very helpful but nothing changed. They suggested returning it. Before I do, I want to ensure I am not doing something really stupid, and/or that this is a known problem that has a fix or will have.

Appreciate any help ya’ll may have. Thanks!