Future S9 firmware wishlist summary

freeheeler

@bbx100
my screen goes off after one minute (?) without motion… so basically during a usual working day the screen is like 8 hours off

sealion.hr

@nseslija you are right. I knew how to lock but completely neglected this way. I just ran and locked my watch and it was perfect. With upper button I get the backlight without switching the display. Spot on. I would pull out from fw feature request backlight issue.

freeheeler

@morskilav
with the hint of @patterbt I’ve setup custom battery mode that is equal to standard mode (the green one) and just toggled touch screen on… this way I can swipe left-right when unlocked (but I’m never unlocked…) hence it would be great to swipe when locked, too!!
BUT what I wanted to mention to you is: with locked buttons (and screen…) you can with this settings tap once on the screen and the light goes on.
I didn’t expect this but liked it when I noticed it.

sealion.hr

@TELE-HO with watch in locked mode during activity upper button activates light whereas middle button both activates light and immediately switches the display. Thanx for your hint regarding custom battery mode…will try this…although days are getting colder here so today I ran with gloves and I find handling the watch via buttons when in gloves much easier

freeheeler

@morskilav
…true… i’m still in summermode

stromdiddily

@morskilav said in Future S9 firmware wishlist summary:

@nseslija you are right. I knew how to lock but completely neglected this way. I just ran and locked my watch and it was perfect. With upper button I get the backlight without switching the display. Spot on. I would pull out from fw feature request backlight issue.

Leave it in. Update would be the screen that tells you the watch is locked to be way less obtrusive so you can actually see the data right away as opposed to having to wait for the lock notification to disappear.

tomviv

@Brad_Olwin Please could you explain how you do this. I thought you could not use both SA & MC app at the same time.

auxina

Probable date of death ＼(◎o◎)／
Garmin will put it soon.

Another metric.

freeheeler

@auxina
what if watch is wrong, will I get my money back?

Fenr1r

This post is deleted!

Brad_Olwin

@Fenr1r said in Future S9 firmware wishlist summary:

@Brad_Olwin As stated above (a few times):

Well aware of the apps. The thread’s about FW for the watch. My particular insane wish is for the watch to do navigation things the A3P and the Fenix series do (minus the latter’s maps). Without having to haul out and fire up a phone that might be in a rucksack, etc.

So I don’t understand what you are missing? Once waypoints and POIs are implemented (assuming we can name them) what more would you need. The fenix can plot a route on the watch but not the A3P and the A3P cannot calculate or display distance along a route, only in a straight line to the next waypoint. I found that essentially useless, so waypoints on A3P were not as good as the dual app solution we have now for the S-series.

Fenr1r

@Brad_Olwin Short version: I’ve nothing against the Dual App Solution (worst prog rock band ever). It is just that the watch could be more. Navigationally, the Fenix is. In remote areas, why require a second potential tech failure point? Or drain two batteries via BT (and a display) rather than one.

Longer version I’ve PM’d to avoid clogging this thread. Bit of a screed but explains the usage cases/arguments.

Fatih Kale

This post is deleted!

Fatih Kale

@TELE-HO said in Future S9 firmware wishlist summary:

while I enjoy the latest S9 firmware, I don’t want to make an ungrateful impression…
But I’d like that we summarize some suggestions as a list…

light button in watch/activity mode (no unlocking)

lockbutton in watch mode (e. g. 3sec press)

swipe left-right to flip screens in activity

toggle satellite systems on-off independently

HR info (and pace?) in navigation screen

longer duration of vibration for alarm

FW update by bluetooth and SA

blood oxygen saturation (in case Valencell is ready for this?)

anything else?!

Just a little addition

On Navigation Screen
Data Field for “Distance covered / Total distance (If route is used)”

freeheeler

I know I mentioned a proper lock in watchmode already… this becomes more relevant in wintertime I noticed today.
During summer I only need to lock my watch in activities to prevent unwanted button press while I’m working hard
… but in winter I use gloves everyday and sleeves of winterjackets are also bulky… all these help to do unwanted button press…
I know by own experience that scandinavians only wear hats and gloves when it starts getting cold (like - 20°C) but it would be cool to add this before winter is over

freeheeler

… this lock in watch mode would be also good when for swimming in the lake or pool… because I was in watch mode and wanted to switch from alti to battery icon I had to “unlock” the screen.
But then the touch does never get deactivated because water keeps the touch active and the auto “lock” never kicks in.
locking manually would really help here

freeheeler

showing a flashing heart symbol next to HR value in the rhythm as HR is measured as a possibility to double check if OHR is measured correctly

BKtoo

@TELE-HO the light buttom in exercise is solved in option-battery- custom battery- touch screen. Then you just tap the screen to make the light go on fore some sek.

freeheeler

@KnutB
I wish for a light button in watch mode and a manual lock button in watch mode…
and while I think of my original post and swipe left-right is possible it would be good to make swipe possible in activity mode even when buttons are locked…
or long story short: make a toggle to choose if you like to lock only buttons, only touch or both

@KnutB said in Future S9 firmware wishlist summary:

@TELE-HO the light buttom in exercise is solved in option-battery- custom battery- touch screen. Then you just tap the screen to make the light go on fore some sek.

Until it rains… Good luck with using the touch screen when it is wet.