Future S9 firmware wishlist summary

Fenr1r

@TELE-HO said in Future S9 firmware wishlist summary:

@Michele-Zago
it’s not necessary

Or, and trust me on this, it is. Particularly if the user can observe the difference and it is not beyond the capacity of technology to Fuse reference values.

UX improvement by choice (with user-accepted drawback risk). Just like the lock button you miss. Which I wasn’t sure about until I had to wear my watch on the “wrong” wrist and “enjoyed” all the issues you’ve cataloged.

Mff73

@Fenr1r
Agree.
My Spartan fusedalti is often bad. I correct altitude afterwards in desktop database, but I would do it on watch each time if I could. (for the situation I don’t know the altitude at start).
GPS altitude is not always good, but not always that bad. I would like to have the option to see GPS altitude and be able to tweak it a bit and save. We never know when fusedalti doesn’t work.

freeheeler

@Fenr1r
hmm… I’ve once since I own the S9B seen the altitude being bananas and that was when the watch went in some rare kind of the edge of tomorrow mode…
Coming from the A3PS I’ve always adjusted the alti manually, even with the S9B until I’ve learned that this deactivated the fusedalti. So I can say for my needs I miss an alti adjustment for around 0% as fusedalti does that for me, pretty precisely actually! only recently to 1m accurate …but there’s nothing that prevents unwanted button press in watch mode so far

freeheeler

@Mff73 said in Future S9 firmware wishlist summary:

We never know when fusedalti doesn’t work

good point!

Mff73

@TELE-HO said in Future S9 firmware wishlist summary:

@Mff73 said in Future S9 firmware wishlist summary:

We never know when fusedalti doesn’t work

good point!

Yep.
If you have to rely a bit on altitude during a workout, and if it has not been correctly fusedaltied, you are fu… for the rest of your party.

Fenr1r

@Mff73 said in Future S9 firmware wishlist summary:

We never know when fusedalti doesn’t work

@TELE-HO said

good point!

If we trust our map’s surveyors (or the folk who paint numbers on signs/chairlifts/unusually sedentary goats), then we can get a pretty good idea when it’s failing to be as accurate as it could.

Fenr1r

@TELE-HO said in Future S9 firmware wishlist summary:

@Fenr1r
hmm… I’ve once since I own the S9B seen the altitude being bananas and that was when the watch went in some rare kind of the edge of tomorrow mode…

All you need is kill the S9 Omega.

only recently to 1m accurate

If that accuracy never got worse than 3m (the pretty consistent reliability of my old Vector when calibrated), I’d be happy enough to trust it. However, I’m not sure that the vagaries of atmo pressure and GNSS signal reception/DOP could ever really guarantee it. Those conditions are waiting, if somewhat less predictably than the sleeve hazard.

freeheeler

@Fenr1r said in Future S9 firmware wishlist summary:

All you need is kill the S9 Omega.

now I wish for a lock button AND an S9 Omega killswitch

halajos

@TELE-HO said in Future S9 firmware wishlist summary:

@Fenr1r
hmm… I’ve once since I own the S9B seen the altitude being bananas and that was when the watch went in some rare kind of the edge of tomorrow mode…
Coming from the A3PS I’ve always adjusted the alti manually, even with the S9B until I’ve learned that this deactivated the fusedalti. So I can say for my needs I miss an alti adjustment for around 0% as fusedalti does that for me, pretty precisely actually! only recently to 1m accurate …but there’s nothing that prevents unwanted button press in watch mode so far

Is that a new firmware you are testing?

freeheeler

@halajos
unfortunately I am not a tester

franky23

I come from Ambit 3 peak and movescount and I need to have the same improvemente to manage interval training:

can set time or distance but with pace (or better a range minimum and maximum pace) for interval and recovery. Best if S9 can vibrate or bip when out of pace range.
can have memory of different set of customized interval training to can choose from them instead of do the work any time

Thank you

markytarky

And please such a stupid thing like button and screen lock in time mode.

freeheeler

@markytarky said in Future S9 firmware wishlist summary:

And please such a stupid thing like button and screen lock in time mode.

+1k

fazel

Has anyone suggested coupling the toggling of additional features with the Auto DND? For example. I would like the watch to behave as follows.

Default: HR monitoring OFF, StandBy backlight ON
Auto DND: HR monitoring ON, StandBy backlight OFF

freeheeler

@fazel
you basically ask for a high level of customization… I’ve requested this at one or two occasions

Frederic

+1000 for “lockbutton in watch mode (e. g. 3sec press)”

Why have they removed it as it was standard on the Ambits ?
So useful when i stash my watch in my pack or somewhere else.

DMytro

I would also really appreciate backlight toggle. For example with a long press of upper an lower button or just a long press of lower button maybe. I don’t want to use constant backlight on or two fingers switch, since the latter applies to watch mode also, where I prefer backlight to be automatic (also it’s not easy to use when screen is wet or with gloves)

BKtoo

Auto lap default sett to off (it is now sett to on). We have auto lap in the Suunto app.

A Former User

Hi !

Like many of us, i wish they add the lockbutton function in all mode (watch mode included)

The flashlight fonction like the Traverse Alpha

And new watchface with a better design because most of them are really ugly compared to Garmin…

Matze

Move the power saving toggle button to the shortcuts menu.

It is quite annoying to switch it on and off by navigation through the whole settings menu.

I always use the watch in power saving mode, but in order to be able to sync the training data with the APP i have to deactivate it. So I spend a lot of time in activating/deactivating the power saving mode.