Tank pressure must be displayed at all times!

Niels-Søren Bøgh

The tank pressure(s) are hidden behind the compass and user enabled Fields!

Solution: There is enough vertical space right to the Depth Gauge to graphically show the active tank pressure at all times. E.g. as a 5 bar indicator that are green until the user set alarm level, then orange and red from 50 bars and down - and blinking red below 20 bars.

AND a 1 Field sized compass will be nice - even that its shows only the numerical bearing from north and a red arrow to the left or right to indicate the shortest direction towards north - and a vertical yellow line marking the user set course…

hhouter

In our dark and merky waters in NL the main screen for me is allways the compass screen. And yes you can switch but I really would like to see an option with the tank pressure in compass mode…

Aquario

@Niels-Søren-Bøgh and @hhouter I am miffed about the same issue that compass hides the tank pressure.

I made a list of a few software limitations in the following thread, let’s hope Suunto developers are listening:
https://forum.suunto.com/topic/14363/software-limitations-of-suunto-nautic-vs-garmin-x50i

Pascal Roy

@Niels-Søren-Bøgh Goodnidea I up vote for this.

antoine_ld

Indeed tank pressure and compass should be visible in 1 screen.
It should be a simple fix.

With a small compass widget, with just the heading in degrees, I would be happy.

Setup a screen with tank pressure and heading.
And never have to change screen on most of my dives.

hhouter

# Suunto Request:

It would be great if can you make a Switch Window “Compass View” double field. In this case we can assign it to the main screen and have the pressure + compass in a single view.

The view would be perfect to hold position and check regurarly during the dive.

The limited view should hold the position N/S/W/E markers and bearing indication as in the picture below.

Spooky

@hhouter it is also posible to put the tankpressure in the screen with NDL. So the TTS change for tankpressure.

hhouter

@Spooky HI, Just a question, how do I change the TTS out for Tank Pressure? When I select “Allways show both NDL and TTS” it is fixed window and I cannot change this field as it is not the switch Window.

Niels-Søren Bøgh

@hhouter You cannot change NDL and TTS to Tank Pressure.

The NDL (No Deco Limit) and TTS (Time To Surface) fields are dive related primary time information in minutes - where as Tank Pressure belongs to another section on the screen.

But, you have an option to see booth at the same time, if you want to know the TTS before the NDL reach 0 (and the dive become a deco dive, where the TTS will increase even if you stay on the same depth).

It should be in this way.

hhouter

@Niels-Søren-Bøgh Thanks. That is what I thought.but I was hoping that there was an option to configure the TTS/NDL screen so that TTS was traded-in for the Tank Pressure. In our waters here in NL the Tides / Currents / Shipping routes require me to have the compass screen as my primary screen in front of me at all time. This screen does not provide me Tank Pressure so switching to the main screen is required. I hope Suunto will make a 1 field Compass view somewhere in the future.

Pascal Roy

@hhouter I do agree with you , the compass should be also available as a “small” window. So one could configure tank pressure and Compass on the same custom screen.

As for NDL and TTS displayed at the same time on the Middle section. I find it well placed

Alain Tsagalos

@Niels-Søren-Bøgh Bonsoir, ça me parait indispensable également -> j’èspère que ce sera retenu pour une future mise à jour

Nandodiver

Its possible to use tank pressure with ascent rate… its one click away

Art C

I am a new and un-proud owner of the Suunto Nautic. I cannot believe that the Compass cannot be show along side with Tank Pressure. The screen is so brilliant but we are only allowed to use on small corner and maximum of two data fields (None if you choose compass for a page). This is ridiculous. I strongly advise against buying this watch. I should have gone with Perdix or Garmin. Very disappointed. I did not know I have to come to forum to find out I cannot do this.

hhouter

@Art-C I’m not sure for the full 100% but it seems Suunto is wotking on an update that makes the screen views more flexible. It was written in the forum somewhere but Suunto has never been confirmed. So let us hope by putting post to the forum thry pickup and do what the Nautic users want. Indeed the screen is awesome, just like the compass and Battery usage !!!

Migsey

fully agree. Cyl pressure should be on display at all times, in all windows

Nandodiver

@Migsey cylinder pressure is visible at all times

hhouter

@Nandodiver Tank Pressure is not visible when you are in the Compass screen, you need to switch back to the main screen or did the latest update fixed this? I will check…

Art C

@hhouter I bought the Nautic without doing ANY research because I am a proud owner of the original Suunto EON Steel. It was built like a tank and I can customize the pages and fields. When I came back to the diving scene after years of inactivity due to pandamic and life. I saw the Nautic and immediately bought it. I had expectations. I did not know it became a toy like dive computer. It is extremely easy to implement more data fields and flexibility given the hardware but it appears to me that the Nautic is completely designed with different philosophy. It seems to be for casual divers who want a big screen dive computer that tells them what to do without any tinkering or technical mindset. I am going to sell it and get a proper computer like Perdix or the Garmin X50i ($$$)

Art C

@hhouter Compass takes up two data fields. Tank pressure definitely cannot be seen along side with compass.