SOFTWARE UPDATE 2.35.34 Q2
-
Since the update I have had the problem that my heart rate measurement stops. The LED is off and I have to restart the watch. Does anyone know this? I have the 9pp
-
@mikekoski490 said in SOFTWARE UPDATE 2.35.34 Q2:
I ‘may’ be in the minority but on the prev firmware I hardly ever tapped the little icons to switch through different data on an hourly or daily basis.
I find the current update with the added options and detail loaded in much much better.
Actually you are not in the minority, just the people who prefer the status quo are louder and more prone to voice their opinion
It is a standard change process, that in this case came a little unprepared for most of the users.
-
@Dimitrios-Kanellopoulos
After the last update, a small problem with the DI2 feature in SuuntoPlus was not fixed, it is still necessary to activate the sensor every training and perform a scan to locate it. -
@Danny-poleg said in SOFTWARE UPDATE 2.35.34 Q2:
@Dimitrios-Kanellopoulos
After the last update, a small problem with the DI2 feature in SuuntoPlus was not fixed, it is still necessary to activate the sensor every training and perform a scan to locate it.I think this has to be like this as it depends on how S+ connect to BT devices. The connection is not saved like other BT pods.
So S+ always need to reconnect every activity. -
Title : Bug with the new pause screen if you start moving while paused
Brief Description : while cycling I paused the exercise . I thought of pushing continue but It seems it didn’t . While I reached the end destination The watch showed me an indication that it detected movement and if I want to resume which I did and the watch returned to the previous screen . The watch showed the buttons of continue and stop . The bottom button did not stop the activity but increased the lap count continuously. Stoping the activity required to enter the menu for multi sport by long pressing the top button and then reverting to the previous screen
-
@Egika
Strange, I connected my smart trainer to the watch once and I don’t need to renew the connection before each workout and in my opinion electric bikes are the same -
@thanasis said in SOFTWARE UPDATE 2.35.34 Q2:
Title : Bug with the new pause screen if you start moving while paused
Brief Description : while cycling I paused the exercise . I thought of pushing continue but It seems it didn’t . While I reached the end destination The watch showed me an indication that it detected movement and if I want to resume which I did and the watch returned to the previous screen . The watch showed the buttons of continue and stop . The bottom button did not stop the activity but increased the lap count continuously. Stoping the activity required to enter the menu for multi sport by long pressing the top button and then reverting to the previous screen
I confirm this. To work around this, when movement is detected I just hit “stay paused” and then resume the activity and it works. Or you can pause 2x times/resume 2x times and the “visual bug” disappears.
This only occurs after movement is detected. And if you are in the city… this can happen often.
-
Bonjour à tous depuis la mise ma suunto vertical solaire consomme énormément de batterie environ 6% par jour et je reçois des messages batterie faible alors que la batterie et à 78% je l’ai redémarrer et était mais rien y fait suis-je le seul à avoir ce bug merci
-
@Danny-poleg said in SOFTWARE UPDATE 2.35.34 Q2:
@Egika
Strange, I connected my smart trainer to the watch once and I don’t need to renew the connection before each workout and in my opinion electric bikes are the sameIs the smart trainer also connecting to an S+ or did you connect it as a bike pod in the connectivity settings?
-
Since the update, I no longer have sleep tracking on 9PP. Someone else noticed this ?
-
@fondueaufromage said in SOFTWARE UPDATE 2.35.34 Q2:
Since the update, I no longer have sleep tracking on 9PP. Someone else noticed this ?
No, accurate as before the update.
-
What a disastrous update.
I have a watch face I didn’t want which the watch defaults continues to default too. Cannot change by touch when I do recover my old face like you used to be able to. Did a warm up today and then on the start line for a race and my watch goes blank and goes into safe mode.
I was a loyal customer of Suunto for years but got increasingly frustrated with this type of software issue. Finally came back with the vertical titanium and here we go again.
Come on Sunnto you can (and should) do much better. They will be asking us to manually wind our watches next!
One very frustrated customer.
-
Is route synchronization also quite long for you ? For me it takes time. Due to new climb guidance perhaps?
-
Had very scary TSS and other values today… Was swimming in the sea actually and suddenly after this Look…
🥴🥴🥴 Someone Something like this!? Whats going in? TSS Yesterday about 700, ATL 104, CTL 102, TSB about -55. But look on the watch graph today
-
@Marton-Attila said in SOFTWARE UPDATE 2.35.34 Q2:
@thanasis said in SOFTWARE UPDATE 2.35.34 Q2:
Title : Bug with the new pause screen if you start moving while paused
Brief Description : while cycling I paused the exercise . I thought of pushing continue but It seems it didn’t . While I reached the end destination The watch showed me an indication that it detected movement and if I want to resume which I did and the watch returned to the previous screen . The watch showed the buttons of continue and stop . The bottom button did not stop the activity but increased the lap count continuously. Stoping the activity required to enter the menu for multi sport by long pressing the top button and then reverting to the previous screen
I confirm this. To work around this, when movement is detected I just hit “stay paused” and then resume the activity and it works. Or you can pause 2x times/resume 2x times and the “visual bug” disappears.
This only occurs after movement is detected. And if you are in the city… this can happen often.
This is quite annoying though .
-
It would be really nice and useful if the four stages of sleep analysis that are in the Race would also be in the vertical
-
Some feedback on the navigation and climb stuff having used the functionality today
First off, massive improvement. Map screen with distance to go to turn very useful, distance left on elevations screen very useful, along with the distance left per climb segment time (uphill/downhill/flat etc) - all great. Took a couple segments to work out that AVG (grade) % is actually the remaining elevation % gradient, not that of the whole segment. Can’t decide how useful that is but I see the purpose. Also negative gradients should say -% for neatness sake.
The refresh rate of data in climb segments is a little slow, the metres climbed/descended and those to go don’t refresh at equal speeds, a bit jarring.
As for turn by turn notifications, I’ve had two thoughts whilst out, which I think are reasonably elegant solutions, one definitely possible and one maybe less so.
So currently we have on the map screen the tooth with the distance to waypoint/turn. I know that it’s possible to have scrolling data fields from multiple S+ apps, so my thought was, in the last xm (Suunto decision) to have it scroll between distance to go and what is coming up - a little arrow with the direction to go at the turn, or the name, or the symbol if it’s waypoint symbol. Then, at the turn/waypoint it defaults to only the direction/symbol for 5s, and then goes back to distance to the next waypoint.
That’s the easy bit. My further proposal, to stop full screen notifications for turns/waypoints coming up, is to use the tooth and the UI we have effectively. Every screen you set up currently has the tooth at the bottom (except S+ apps and the elevation graph). My proposal would be to override the information in the tooth for xm (100m or so) before the turn in the same way as previously described, have that behaviour as above and then return after the set waypoint/turn to normal. So what normally might be pace, changes to the direction distance to turn, and then back again.
This approach would prevent need for switching to nav screen purely for turns, and would only apply on routes - and might be impossible to implement. An idea though.
Finally had the bugs previously mentioned in the thread with the dot at the end of the climb segment when starting the segment, and also I had a downhill segment that thought it was an uphill.
See below:
-
@The_77 When it showed uphill instead of downhill, were you on an overlapping section of the route? I’m trying to figure out if that is the cause.
-
I’ve never used tbt before, so I’m just giving it a try with the new Fw.
found this bug that I’m almost sure it’s already been reported, but , anyway …
kinda straight back and forth route, with a small loop on one end, actually a lasso
got indication to turn left on my way back, even if I should go straight.detail, I paused almost at the middle of the route.
-
@sartoric It looks like all the turn arrows are backwards. It’s giving you directions as though you are coming from the opposite way (from left to right on your watch face). But the long, light blue arrow is correct. This looks like another case where some navigational tools think you are following the route backwards, and others think forwards.
I tried to explain my experience here: https://forum.suunto.com/post/148013