Parallel Use Of Movescount + Suunto app

Saketo Nemo

Correct me if I’m wrong.
You can do the opposite: first movescount app, then suunto app.
The watch accepts only one app connection at a time, so you can keep it paired with movescount app, allowing it to connect to sport trackers. This will also update the suunto app.

I use the other way: watch connected with suunto app and, as I said above, moves, routes and sports mode updates via cable (suuntolink)

suzzlo

@Saketo-Nemo I haven’t found the mode to have watch paired with 2 apps (Android). I don’t want to use simultaneously, just avoid to pair/unpair process

suzzlo

@suzzlo said in Parallel Use Of Movescount + Suunto app:

@Saketo-Nemo I haven’t found the mode to have watch paired with 2 apps (Android). I don’t want to use simultaneously, just avoid to pair/unpair process

Upssss… doing some testing… I found! start/stop plane mode and it works!

sartoric

Did anyone try the “parallel” setup on Ambit 3?
Does it work ?

margusl

@sartoric , I do. And it kind of works. Something is going on with notifications, I just notice it when phone beeps and I glance at a watch but nothing appears. Sometimes. I think. Maybe some notifications from some apps are just not pushed to the watch. At the moment I just went through steps bellow and also got a notification while SA is still re-syncing all the Moves from Ambit.

Anyway,
I unpair Ambit from phone’s BT devices;
switch off phone’s BT;
start pairing from watch (pair mobile app -> already paired -> replace);
open Movescount, add watch and allow it to enable Bluetooth, pair with PIN and let it sync;
close Movescount task (just closing it from task list seems to be enough);
open SA, it wants to pair with a watch, accept (there’s no pin entry this time)
and it starts syncing all logbook entries.

if I want to sync with Movescount, I make sure I close SA from tasks, turn off Bluetooth, open Movescount and let it enable Bluetooth. Usually watch automagically syncs with SA, but I’m not 100% sure if it happens only when Movescount task is closed or put on hold by some Android bat. & resource management thingy.

Android 8 on Galaxy S9 and Suunto app beta.

sartoric

@margusl
Now it seems to work. My friend didn’t remove SA and unpair before trying the parallel use … despite my reccomandations

Do you have issues in transferring custom routes ?
He can’t see the toggle

margusl

@sartoric said in Parallel Use Of Movescount + Suunto app:

Do you have issues in transferring custom routes ?
He can’t see the toggle

it’s not enabled yet for Ambits

sartoric

I had my suspicions …

Audaxjoe

@Dušan-Ković you can import routes into SA, just save the file somewhere either on your phone or the cloud then click to open it and the phone (mine does anyway) will ask what app you want to use and SA should be in the list. It will then open and you can save and sync it to the watch.

This works for me anyway, running an Android phone. Someone on here explained it, I am just repeating it!

Marek Martinec

HI guys,
i’m new here, and I have a problem,
I started using Suunto app, and have a few exercises there, and now i would like to update them to movescount, I read FAQ, downloaded Suntolink and did all the steps, but when i open my movescount I dont have my exercises there, so is there some other way?
Thanks

sartoric

Did you already try to customize sport modes or routes ?
Because after that you cannot sync via cable anymore.

Somewhere up here you can find a workaround to use both SA and MC app.
Anyway you should sync to MC first and then to SA.

Marek Martinec

@sartoric yes, i customized some modes…can i delete them and try to sync then?

sartoric

@Marek-Martinec said in Parallel Use Of Movescount + Suunto app:

@sartoric yes, i customized some modes…can i delete them and try to sync then?

Unfortunately not.
That’s why there is that “warning” message.

to revert it you need to reset (not a soft one) the watch

Marek Martinec

@sartoric
so there is not a way now to get my exercises from suunto app to movescount…
thanks for answers.

sartoric

@Marek-Martinec said in Parallel Use Of Movescount + Suunto app:

@sartoric
so there is not a way now to get my exercises from suunto app to movescount…
thanks for answers.

Maybe using some strange combo with Sport tracker (that I would not suggest) or some other third party like Strava.

surfboomerang

At this moment I try to do the same. I synced all my Movescount moves to Strava. Around 30 moves are not present in Movescount, but are in Suunto App (most of them not on the watch anymore).

So I tried to find a way to sync the last moves from Suunto App to Strava. Because I didn’t activated the Strava sync immediately, I now have to move them manually.
I tried exporting it as GPX from Sports-tracker and import it in Strava, but then Strava shows me the wrong times (sometimes more then double) for my running exercises.
Syncing with 3rd party tools gives me the same errors as the manual import/export.

So if anyone has some great advice…

A Former User

I’d use both SA and Movescount only if they used the same backend. As a software developer I know that anything short of that is going to be a mess, and I have very low tolerance for that. Is there any reason why SA can’t talk directly to Movescount backend instead of ST one?

By the way, many responses here show that some users are confused and don’t understand that MC App and MC Web is the same thing as far as data storage is concerned.

CharlyAtBc

Small contribution: I used the Movescount App for a run because the watch (Suunto 9 Baro) crashed and was waiting for a reset, and the Suunto App still doesn’t support the HR chest monitor. The result is I still haven’t found a way for the recorded move, that is on the Movescount app, to be synced with my Movescount account. Tried creating a new move, pair/unpair the watch, even removed the Suunto App to try, didn’t change anything so far: the run has a black background indicating it’s not synced and indeed it is not… Any idea? Would really appreciate to have that move synced.

AnthonyB

Hello, I’m new, I walk from topic to topic for find informations and it gives me warm heart to see a beautiful community.

I use both applications as well. I wanted to send my new routes created with MC (thanks to the import) in my Suunto 9B. Only, i have to reset the watch because it was connected with SA.

Bug synthesis: My watch no longer displays the data “sunrise” and “sunset”. Neither the sun curve
A daily race without knowing the fall of the night is problematic lost in the forest.

Anthony for France

Dimitrios Kanellopoulos

@AnthonyB hey if the watch does not show these times, just get a GPS fix and it will