Software Update 2.40.38 (2025 Q1)
-
@enriqueescoms
S9PP user here!
Two days with the new firmware and I didn’t find important bugs for now. I appreciate the new version of “saving battery” mode. Carousel menu is back and I like it as it has a little zoom-in. No running sessions yet, just weight workout and walking and no problems! (just remember to chek all your fav settings before starting the activities). -
@enriqueescoms said in Software Update 2.40.38 (2025 Q1):
For 9PP users, what do you think? Is it worth it? (Compared to v2.39.34)
Yes, solely because it remembers I don’t want breadcrumb on by default
i have no battery related comments yet, sleep always works for me so nothing has changed there, GPS tracks are still pretty decent, I can be very picky about spread under tall tree cover but it’s not hideous, I suspect that loop is difficult in general, lastly I never run with OHR so that is by the by regarding improvements for me.TBT is both better and not there, as you can read in the thread.
8x loops yesterday here, light rain in forest under cloud, for the 9PP I don’t know how much better I would expect, spread is reasonable.
Same Loop x2 on previous FW, on a lovely sunny day - much worse for the effort loop. Obviously GPS variation is day by day, so I’ll have to wait a bit to see long term
-
So far everything is fine, during installation the watch face was set to standard, but when adding/sync new watch faces - everything is ok - and thanks for the option to add more complications!!
-
SV solar titanium here.
There seems to be some bugs in getting the new watchfaces to work… I installed all of then via SA and was only succesful in trying out one of them. Additonally, that one also resets to the default verticla face whenever I perform a sync with SA. All in all, seems like it is in a unusable state for me atm. -
On the Race, the eco mode has disppeared, or has it moved at another place ?
-
@maszop said in Software Update 2.40.38 (2025 Q1):
Still about 10% battery usage per day with no GPS activity. Vertical.
Suunto Vertical
5-6%/day after update
3.5%/day before updateSame settings, soft reset also, doesnt help.
-
I tested navigation yesterday cycling and for me it is no longer usable as is and it was usable before.
- as discussed heavily here 20m is not soon enough …
- Worse for me though is I typically have a single data page which I keep up for the whole ride. On the data page is a “Distance to next” field. In the last version of firmware, it showed distance to next turn. This is now no longer the case as it just shows the distance to the end of the route (I know if I had explicit waypoints, it would show the distance to that).
For today’s ride I manually created all my turns as explicit waypoints on my route and turned off Turn by Turn. I think this will solve both issues. I believe the new implementation gives you 50-meter notice instead of 20 for waypoints. I will see how it goes. The only issue I see, is I will lose the turn icon in the notification full screen popup.
On the other-hand I think the new implementation will be perfect for my hikes so I’m not suggesting changing it. We just need some more flexibility in other activities. A separate new field for ‘Distance to next turn with Icon’ would solve my issue and maybe moving back the notification to 30-50 meters.
(EDIT) Post Ride Notes: 50 meters is still not enough when at speed. Also, post waypoint notification did not show ever. I think it’s supposed to show the next waypoint 20m after the current, so I had no idea what the next turn was until I got there.
(EDIT 2) It absolutely needs to be 100 meters … I reverted the firmware for my most recent ride and that distance seems about right.
-
@pavel-samokha right after I did the update just now, my all time favorite watch face, Modern Analog, does not work anymore.
It was gone right after the update.
The App claims it is installed, but the list on the Race is very, very short and Modern Analog is not one of them.
I uninstalled EVERY custom watch face, then re-installed Modern Analog, but it does not appear on the device. And neither can I make it the active one using the App.
What should I do to get my watch face back???
-
A new bug.
Regarding sleep tracking, the watch shows 7h44 while the app shows 4h10…
What the watch indicates is accurate.
-
No matter sport, wearing my Suunto Vertical same way on left hand 2 years, and since last update my trainings looks like this. Today tested with threadmill gym just fast-walking, and its HR.
Happening since update, before my HR sometimes dropped but by low values, not from 160 to 70. I’ve tried soft reset before, pause and take off watch to lose HR, put it again and still, its drop instantly. I know its watch, not chest strap, but before it was pretty accurate. Someone can confirm if have similar problem?
-
Hello since the new update I am no longer the weather am I the only one
-
OMG THANK YOU SUUNTO!!!
After two years of having Vertical I finally got my first VO2max
I’ve tried all kinds of tricks, trying to keep my HR in certain area for long enough as instructed by the official support. I tried with and without chest strap. In the end all it took was a long aerobic walk. 1h 16min in this case.
All the talks about “must be absolutely perfect GPS and HR” is now quite questionable since I even popped in a big store for a few minutes to buy a couple of things. And I only had optical HR (but it was my better wrist).
No sarcasm, I had actually given up all hope. I settled for CTL and other metrics when I saw that they were in line with my dropped weight, improved aerobic performance and better feelings altogether. But now I got the last missing measurement
-
Possibly a bug on my Vertical: when I disable Wi-Fi under the Wireless Network Automatic menu, the setting doesn’t stick. When I return to the menu, it’s enabled again. If you don’t mind letting me know whether I’m alone with this issue, I’d appreciate it. Not a big deal, by the way — thanks to the developers for their work.
-
Today on my Race S during a ride the HR sensor stopped suddenly and only came back after restarting the watch once coming home, the green led wasn’t flashing anymore, even after cleaning the sensor.
As you can see, the HR stopped just before 40’ and i’m pretty sure my heart was still beating
Anyone experience this problem ?
-
@maszop said in Software Update 2.40.38 (2025 Q1):
Still about 10% battery usage per day with no GPS activity. Vertical.
And what setups you’ve left? What’s exactly is on and what’s off? My SV 1 - 1,5% battery usage with only bluetooth turned on.
-
First night with new SW and S9PP starting, so lets see how the sleep tracking will go.
Edit: First night sleep tracking worked, so all good for now.Some first impressions from today are that GNSS is not the new one which was introduced in the previous version.
And after the update the previous watch face was there still for awhile before going back to default one. It needed few syncs before it was possible to add new WF, even app says that you have it on your watch, so some odd behavior there was, as someone else also reported.
Great to see the carousel back as the active widget is now much bigger.
-
@maszop The same procedure as everytime… it works fine for all test persons… and we make a beta-test for less 24 hours…
-
@SuperFlo75 fingers crossed next time it’ll be a week or more!
-
@Ars-Vitae I always use the same settings, sleep tracking, 24h HR, etc.
It used to be 3-4% per day. After some buggy update a long time ago the battery drain problem appeared (many people reported it on the forum) and it has remained that way to this day.@SuperFlo75 Testers never seem to see any problems. That’s the problem with Suunto.
I hope that this public beta (despite its ridiculous duration) is a signal that something is changing. -
@maszop I guess, a lot is fixed behind the curtains. Let’s see what happens when there is a time window to actually have a meaningful test in public…
With Garmin’s public betas, there are reports from the testers and the software is released with reported bugs anyway.