Software Update 2.43.8/.12 (2025 Q2)
-
No problems with either update on my Suunto Vertical. Lots of hiking with it of planned routes. Sleep data good. Anyway. Appreciated these regular updates from Suunto.
-
It seems to me that something has changed on the altitude measurement.
for similar paths and knows tracks, i get lower altitude measurements despite having similar elevation gain (ascent descent is quite ok). At ±600m altitude with 170m ascent I still get similarish ascent but with significantly lower altitude measurements! the map lines indicate that previous measurements where right , but the recent ones are not (see below)
current shows
map
-
After updating, you must calibrate the altimeter.
Previous calibrations are lost when updating… -
@larrybbaker I had to soft reset watch. It solved issue.
-
@sky-runner as you already see in this thread, not everyone is unhappy with the levels of detail in the map zoom levels.
So it’s down to perspective.
I understand that you don’t like it - which does not make it a bug.
Whenever there is change, some people are disappointed, while others are fine or happy.
Remember the change from revolving complications to fully customizable but fixed?t6, S6, Elementum Terra, Ambit 3 Sapphire, Spartan Ultra Copper, Traverse Alpha, S7 Graphite LE, S9B Ambassador, S9P Granite Blue Titanium, S9PP Titanium Sand, Vertical All Black, Race Titanium Charcoal,
Race S All Black - Titanium Courtney
Run Lime -
@Jordi-C said in Software Update 2.43.8/.12 (2025 Q2):
After updating, you must calibrate the altimeter.
Previous calibrations are lost when updating…I think it is automatically adjusted after 5-10min after the exercise is started
-
@VoiGAS a drill mode that allows for manual entry of distance would solve most all problems with swim-tracking
-
@sky-runner no worries. As I said I agree with you. And I understand.
-
@SailingP I noticed that now also. Thanks. Will
See if it is fully resolved now. -
@Egika said in Software Update 2.43.8/.12 (2025 Q2):
I understand that you don’t like it - which does not make it a bug.
I agree that it doesn’t make it a bug. But this shift in rendering makes maps less usable when running in wilderness on trails. When trails disappear after zooming out as little as 500m in metric or 0.2mi in imperial, there is pretty much nothing left of the map. What’s the point then? Suunto is one of the major sponsors for UTMB, so I thought Suunto sees trails runners as one of their core user groups. The design of packaging for their watches conveys the same message - that this is an adventure watch for exploring trails.
Let’s hope this was not intentional and will be fixed soon.
Also, I wanted to use this opportunity to mention that I am also unhappy with the choices of colors on all maps, including the high contrast one. Trails aren’t contrast enough, like dark green on green in the light map or grey on black in high contrast one. Even when trails are still visible, for example at 500ft or 200m scales, they are nearly invisible to my eye due to their width and poor contrast. So with this change, I can still see trails well only at the 200ft scale that covers at best only about 20-30 seconds of running.
-
@sky-runner I agree with your statement. I always found it very useful to see trails when in unknown terrain to orient myself. I hope they are fixing it with the next update. And maybe an option to adjust how many feet it meters turn by turn gives a warning. It really makes a difference when biking vs running.
-
Is my understanding correct that with the new ZoneSense data fields it is not required to use the SuuntoPlus app now?
-
Any info on why the 9PP is not getting the update?
-
Coming back to the altitude measurements issue
- leaving the watch idle , it should NOT change either altitude nor the barometric pressure … at the moment a storm (which should have triggered the alarm ) changed both the altitude measurement and the barometric pressure , but that way both indicators were somehow wrong
-
@danct As far as I read it there are only fields for the time in the different zones - but not the zone you are currently in itself. But didn’t try it
-
@isazi FYI I had the same power display dropouts on my long run yesterday. This appears to be pretty consistent new behaviour I’m getting every run.
-
@thanasis This is the Suunto automation that replaced the manual Altimeter/Barometer mode switch found in older watches. Which, despite what people associated with Suunto have written here many times, works poorly.
-
@far-blue okay send me the activity, I’m collecting some examples
Watch: Suunto Vertical Ti
Blog: isazi's home
-
@isazi Here’s a run where I saw consistent power drops on my Race S despite only stopping twice at intersections. This was an easy run.
https://maps.suunto.com/move/aarontoponce/685548cd0767c11a0a1196a9
I dare say half the time I’m looking at my watch while in full run, the power from my Stryd foot pod either reads 0 or just coming up from 0. Because I use 30s avg for my data field, it takes a bit to climb back up.
-
Voice feedback it’s not working. Two running exercises and no voice in my case.
