Software Update 2.44.46 (2025 Q3)

Mitch9

@helgonet12 said in Software Update 2.44.46 (2025 Q3):

@Mitch9 I also get them. I think it is related to the pass code lock. I have turned it of and do not receive any vibrations any more.

I have turned pass code lock off. So this is not the reason.

Thunderchicken

@jjorgemoura I agree with your assessment.

I just did a 60K bike.
climb profile showed the entire route as before.
first zoom showed about 50K of the ride.
second about 48K. the zoomed profile made zero sense.

i left it zoomed for a bit and was really surprised to see the completely useless information as it changed. there seemed to be no reason i could find for the random zoom levels. sometimes short distances, sometimes very long. and ending at random points in climbs or decents.

i would be happy if it was similar to the map zoom.
everything, 20k, 10k, 5k etc.

I regret installing this update.

teo's

@withManish said in Software Update 2.44.46 (2025 Q3):

@pavel.samokha Thanks, but it does not download and keeps waiting to get connected to the power cable. Battery level is 90%+

Same problem here. Updated to latest firmware on Race and latest version app on my Google Pixel 5, still the watch needs the charger connection to update maps. Suunto, can this kind of s#it finally be fixed once for all?

Squirrel

@teo-s said in Software Update 2.44.46 (2025 Q3):

Same problem here

Same problem here? So use the same solution offered.

GiPFELKiND

@teo-s thats not true. Its only shown in the App that you should put it in a charger. Dont do this. Go away from the charger, let the watch at your wrist and the watch will start download it via wifi at your wrist.If you need more instruction please PM me.

halajos

I may have found a bug in the ZoneSense intensity zone target implementation. I had ZoneSense S+ enabled and also set intensity target to ZS aerobic zone in exercise options. When I was outside the target zone, the pointer moved to the current (supposed to be yellow, but was blank) ZS zone, but in the intensity ring the green (target) zone remained highlighted. In contrast, on the S+ screen, the current zone (yellow) was highlighted. Looks like it’s not intentional, as it looks weird.

helgonet12

@Mitch9 hmm strange. For me it stopped. What watch do you have? I have a vertical. Edited. I see that you also have a vertical.

Squirrel

@halajos said in Software Update 2.44.46 (2025 Q3):

When I was outside the target zone, the pointer moved to the current (supposed to be yellow, but was blank) ZS zone, but in the intensity ring the green (target) zone remained highlighted.

That’s how it works for HR target zones as well. Target zone is always highlighted, not the active zone where the pointer is.

Theo Lakerveld

@Chris_Dx I also had excessive (+20% / day) battery burn, without exercise, after the latest update. Though, after letting it drain to two % battery, recharge to 95% and a soft reset, the battery drain is way better again. Now I’ve had 26 % drain after 3 days with ~5 hours of GPS exercise, with best the GPS performance stting.

teo's

@GiPFELKiND Of course i don’t. Download GBs and GBs of maps needs time, especially if you don’t have fast internet connection, that means the watch needs to stay time under charge even if at 100%, probably the best thing you can do if your goal is waste battery…

However I don’t understand the sense of keep the app saying to do the main thing shouldn’t say no more after a fixing firmware. Really don’t. I may even solve the problem someway, but firmware are supposed to fix bug in the right way, not via forum.

teo's

@Squirrel As I said, working firmware are supposed to do their job without shortcut or forum tips… Make an update and then force users to make it work it’s simply ridiculous, even more of you neither release instruction alongside the appstore changelog. Many of them not even know the existence of this forum, so no, your one it’s not the correct answer, even if you can be right.

Mattg576

@VoiGAS I also had a couple of easy runs tagged as VO2max in the app since the last update so changed my TSS back to HR as you described (update had set it to TSS R so thanks for the info)

I ran a super easy run yesterday (all aerobic according to ZS & zone 2 by HR) but the activity still got tagged with VO2max.

Looks to me that the tags are still applied using TSS R calculations that the update force changed to despite me selecting “use TSS HR for all future activities” (I’ve never configured Pace zones).

Dušan Ković

I have a question - do I still have to have ZoneSense suunto plus app active during activity, or ZoneSense now just works without a S+ app? Tnx

isazi

@Dušan-Ković you can use the outer ring (or the data fields already available since Q2 update) without having to use the S+ app

smopi

@isazi said in Software Update 2.44.46 (2025 Q3):

you can use the outer ring

But how? Is it somewhere customizable? I always have only HR outer ring.

Mattg576

@smopi
Exercise options
Intensity zones
Zonesense
Set target zone

smopi

@Mattg576 Of course. Than you, but this option seems to be only available for certain sports modes. Unfortunately, I don’t see it for walking.

JonasLarsson

Did we know what the sudden random vibration, for no reason, is? A bug or a feature…

Dušan Ković

@isazi Awesome! That’s all I need. Thanks!

Dušan Ković

@smopi You can choose what outer ring shows in the Exercise options before starting the exercise under Intensity zones field