Software Update 2.48.16 (2025 November Rain release)
-
Hi ! since last update (I’m under IOs) with either my SV and my SRs, routes created during an exercice are displayed has synced with watch, but if I want to change the route I’m navigating on in exercice settings, they are not visible.
The ability to send new route to watch without stopping exercice was on the most usefull function to me.
Do you have the same issue (iOS or android) ?Suunto’s devices at home :
Vertical titanium solar
Suunto Race S
S9pp titanium sand
Suunto Wing
S9B titanium Ambassador edition, A3P, X6 -
Two things that I noticed in the new update on my Vertical 1.
-
The new report in the morning does not show when I fell asleep and woke up. For this I have to go into the “old” view. Where the x is missing.
-
When you finish an activity, I ride a bike, I see fewer values on the watch. Sure, I see the time, the kilometers and so on. What is definitely missing is the recovery time.
Suunto 9 Peak Pro
Suunto Vertical Titanium Solar -
-
@Kaiphi said in Software Update 2.48.16 (2025 November Rain release):
The new report in the morning does not show when I fell asleep and woke up.
On Race S, they are shown under the sleep phases graph. Is it different on Vertical?
-
@Tieutieu Woaw… Thank you ! I was convinced it wasn’t possible to send new routes to the watch while a recording was in progress because Suunto App displayed “Watch is busy”. In fact, I realize that I had never tested this function and I just did the test now with my 9PP, it works fine under Android.
-
@Kaiphi said in Software Update 2.48.16 (2025 November Rain release):
Two things that I noticed in the new update on my Vertical 1.
- The new report in the morning does not show when I fell asleep and woke up. For this I have to go into the “old” view. Where the x is missing.
I noticed the same thing on Vertical 1 and 9PP ; the time I fell asleep and woke up isn’t visible in the first morning report. Now we have to check the sleep log to verify. It was more practical to have both information directly in the morning report to quickly check if the watch had recorded the sleep data accurately.
@Squirrel said in Software Update 2.48.16 (2025 November Rain release):
@Kaiphi said in Software Update 2.48.16 (2025 November Rain release):
The new report in the morning does not show when I fell asleep and woke up.
On Race S, they are shown under the sleep phases graph. Is it different on Vertical?
Yes, but not on the automatic morning report, you have to check manually after, on the sleep log.
I also noted that the “X” for the central button and allowing exit from the sleep menu does not work with all fields.
-
Here is my recent battery experience with my Vertical 2.
Over the past 14 days (and a bit) I managed to do 19.5 GPS+HR activities and drain 91% of my battery.
I built a simple prediction model for battery drainage rate assuming that there are three different drainage rates: During GPS+HR activity (running and cycling in my case), during sleep (DND) and while idle (with notifications and raise to wake variations). Under these assumptions I tried to approximate the drainage model as close as possible to the battery levels and activity times I recorded during the day and came up with the following numbers (they imply slightly less than 5% per day without activities and more than the spec 65 GPS hours):
Sleep tracking rate: 0.11%/h
Non activity rate: 0.25%/h
Activity rate: 1.16%/hThe above model worked very well during most of the two weeks until the last day or so when the battery got to about 20%. From that point it seems to drain faster than my model allowed. In fact, until that point, the model showed about 1.07% drainage per GPS hour which I updated to the higher number above to compensate for the end.
Settings:
AOD OFF
Raise to wake: Display only
247 HRM
Notifications ON
No external BT connections except Android Suunto App (6.4.7)
Wireless OFF
BT discovery OFF
Brightness LOW
Sleep (DND) from 22:00-5:40
-
@fondueaufromage said in Software Update 2.48.16 (2025 November Rain release):
Yes, but not on the automatic morning report, you have to check manually after, on the sleep log.
Unlike the sleep log those times are not individual lines, but rather the left and the right end of the graph. In the automatic report and the sleep log they look both the same. But there are additional lines for the time fall asleep and wakeup in the sleep log.
Suunto Race S
-
said in Software Update 2.48.16 (2025 November Rain release):
Hi ! since last update (I’m under IOs) with either my SV and my SRs, routes created during an exercice are displayed has synced with watch, but if I want to change the route I’m navigating on in exercice settings, they are not visible.
The ability to send new route to watch without stopping exercice was on the most usefull function to me.
Do you have the same issue (iOS or android) ?Beta iOS 3.6.1 is out and issue seems to be fixed ! Happy
-
@gkaempfer Hi! Amazing data! I suppose this is good
.I made a thread to harvest all battery data. Hopefully we’ll see usefull patterns.
Are you using an external HRM like the H10, by the way?
-
Are we done for this year? Or Santa has something in the bag for us, like software goodies?
-
According with other forums we aren’t done yet and Q4 should arrive in a few days
-
@cosme.costa woohoo you are Santa’s little helper keeping us in the loop
-
No, now seriously, I do not have any inside information but in the Spanish Forum there are more hints than here and some more valid information that I haven’t seen here.
For exemple, I have deduced that the flight mode bug is solved, that R2 and V2 will have, at least, and extra Suunto App during exercise (I do not know if even more or if this will also come to R1 and V1), that if you go to the SA, your profile/feedback you can also report errors there,…
-
@cosme.costa I hope its a Stability Edition for Christmas - new features come with new problems…
Race S
Vertical
Ambit3 Vertical -
@VoiGAS Well, yes and I think is part of the game. I mean, as an example, Suunto didn’t have multiple sensors, they have just implemented it some months ago, so in part is expected that they have some errors and in next iterations all it is polished. For me the important things is that they acknowledge the bugs and work on them, things that I consider that Suunto is doing, maybe not with the pace that I would like but they do.
-
@cosme.costa what bug is the flashlight bug?
Mine is working as designed.
The design though will be improved in some wayst6, S6, Elementum Terra, Ambit 3 Sapphire, Spartan Ultra Copper, Traverse Alpha, S7 Graphite LE, S9B Ambassador, S9P Granite Blue Titanium, S9PP Titanium Sand, Vertical All Black, Race Titanium Charcoal, Race S All Black / Titanium Courtney, Run Lime
-
@VoiGAS you know some of us grew up with traumas from Christmas days not meeting our expectations. I hope Suunto has a better parenting approach
-
@Egika I think you misread. ‘Flight Mode’-bug is the following: airplane mode isn’t turned on completely when enabled/disabled from the control panel. You need to enable/disable it from settings.
While I’m an electronical engineer by study, I didn’t work with it. So I might not be the one who needs to say this
. But this is weird software design, isn’t it? If I would make an Airplane Mode, I would make one function you can execute from multiple places. I wonuldn’t make two different ones. It seems to be Suunto did. -
@cosme.costa in which website. Can you send here link? Thanks
-
@Egika as @Horizontal_2 wrote I meant the airplane mode.
