-
@Alpha That is my understanding of how it currently works, so yes the only way to track barometric changes against the 24 hour graph is when the Core 2 screen stays in baro mode. As soon as you switch to time mode, it assumes all atmospheric changes are related to altimeter.
And if you forget and leave it in baro mode and change elevation, it assumes the change is weather related and will adversely impact the baro history graph and trend arrows and no way to reset them until time does.
Its too bad, as the auto baro/alti switch feature was a big breakthrough with the Core, and is now pretty standard on all current gps ABC watches by Suunto and others like Garmin/Coros etc, so not sure why they went backwards here. The only reason I can think , is to ensure extreme accuracy, as the auto mode could get knocked out of baro mode and into alti mode if there was an extreme change in air pressure, but that was rare and definitely outweighed the convenience of auto mode.
Now Im back to treating my Core 2 same as my old Suunto Observer, but at least even with the Observer you could be locked in Baro mode and still use the main watch screen.
Im hoping this gets fixed in a future update.
-
Its also why Im guessing Core 2 doesn’t display baro trend arrow on the main watch screen - because as soon as you are on the main screen, it’s forced into alti mode and baro readings are disabled?
Are you sure about this?
I just checked my Core 2. It was sitting on the desk untouched for a couple of days in time mode.
Still I get a baro trend:
t6, S6, Elementum Terra, Ambit 3 Sapphire, Spartan Ultra, Traverse Alpha, S7 Graphite LE, S9B Ambassador, S9P Titanium, S9PP Titanium, Vertical All Black, Race Titanium, Race S Titanium Courtney, Run Lime, Race 2, Vertical 2 Titanium, Race 3s
-
@mikekoski490
Thank´s! I’m hoping for a major update. I just don’t understand this change.
On my Traverse Alpha, I rarely adjust the altimeter settings. It works great there. As far as accuracy goes (without adjusting the values), the Core Alpha falls somewhere between the Core 2 and the Traverse.
I just want to use the watch—not constantly monitor and adjust it to tell if I’m moving up, down, lying down, or swimming…
I’d at least like to have the option to choose a setting mode again. -
-
@Egika Hmmm…Ill have to check on that, but from memory/my use, if the watch is left for 2 days in time mode, the watch defaults to alti mode, and the baro graph has been flat which I have assumed is because its reading changes in pressure as elevation change - Ive also had the alti drift hugely in time mode. Baro graph flat. Huh. Ill leave mine in time mode for 24 hours and see what happens to the graph.
Also, the manual is incorrect as it states the trend arrow is visible in time and alti modes as well, which it is not.
And their description re: storm alarm is not great. It creates a scenario where you are hiking and the storm alarm goes off - then states the storm alarm will only go off in Baro mode, so…why would you have it in baro mode hiking? I guess it only works if your hikes are deadplan flat and you dont need the altimeter?
Activating storm alarm
The storm alarm notifies you that a pressure drop of 4 hPa / 0.12 inHg or more has occurred during a 3-hour period. Suunto Core 2 will activate an alarm and flash an alarm symbol on the display for 20 seconds. The storm alarm only works when you have activated the barometer profile. (in other words, the storm alarm wont work in time or alti modes)
Possible real-life situation: Storm warning
You are hiking in a dense forest when your activates the storm alarm. (?)
PS - I really like the new Core 2 generally, because my old Core I could not read at all! Just wanted to make sure no one read this thinking the Core 2 is bad. Just needs a few updates I think to add features that most original Core users really appreciated. FYI in my opinion the display is definitely 40% better, and I can actually use the green backlight to light up my bedroom at night enough to help me NOT walk into the corner of the bedframe.
-
@Egika Hi. So I left my Core 2 on my kitchen table in time mode for 24 hours. I took photos of the time of day/altimeter screen/baro screen yesterday morning and this morning if anyone is interested I’ll post them. At least with my core 2 running latest software:
- 24 hours later, the altimeter drifted by 46 meters, from 30m to -16m.
- The baro graph is flat as a pancake (on my other watch the 24 hour graph is a steep incline, going from 1021 to 1027 overnight)
At least for me, the watch must be left in baro mode to track changes in air pressure as weather related and lock the alti from drifting. In either time or alti modes, it locks the barometer, so changes in barometric pressure impacts the altimeter and causes the alti to drift accordingly.
-
The requested feature will come
-
@Egika OH yes! Thank you!
-
@Egika
Where?!
Do you have the beta version?
I have version 1.13.44, which doesn’t have that feature, and the Suunto app isn’t offering me a newer version! 🫤
What’s next?
A preview graphs of barometric pressure, steps counter, and elevation profile on the main display, auto alti/baro mode, …? -
@Alpha as noted in other threads I am testing Suunto hard- and software.
The requested feature (plus others regarding compass and auto alti/baro) is under test right now.
I am sure it will be released suuntoish. -
@Egika
I don’t really go through the entire forum. I like it when I don’t have to be online. Whenever possible, I’d rather be out in nature. So I only search the forum for specific things. That’s why I didn’t know you were a tester.
Thanks for the positive news, and I’m looking forward to the next official update.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login