-
@mikekoski490 not sure about this, but should DST not be over by now? So that winter (standard) time takes over, and the reality and watch are back in sync?
This should be an issue during summer only, no? -
@Egika You are right! Just other way around.
Where I live the provincial government, as of March 2026, pronounced we would be observing permanent Pacific Daylight Savings Time or UTC‑7 going forward. For the past 70 years we used to ‘fall forward’ on the first Sunday in November to "Pacific Standard Time” or UTC‑8, which is what likely is baked into the Core 2 - not really Suunto’s fault as when the internal algorithm was flashed it was correct. Just surprised this change cant be recognized via a sync to the app, according to their help desk, so that the ‘synced’ times can update the watch offline too.
As you said, it will be correct without a daily sync for 6 months starting March 2027.
So, both my in-built sunrise and sunset times are now 1 hour off.
CORE 2 for today:
Sunrise - 7:16am
Sunset - 4:36pmReality via internet (or when syncing via Suunto app):
Sunrise: 8:25 AM
Sunset: 5:41 PMOn the bright side:
-
At least I can sync it each morning (takes about 4 failed sync attempts though before finally updates so I just might just do the math and add an hour in my head which is ‘somewhat’ easier lol.)
-
Hope that the Suunto help desk was incorrect and this can be fixed via a firmware update down the road.
Look, its not really a big deal. Im not going to perish nordic skiing this winter because I completely forgot the CORE 2 is wrong and I forgot to sync it. Note Im more happy the auto alti/baro switch was added as that was a pain beforehand.
Its just, well - kinda jinky for Suunto. I sort of bought the core 2 to not have to rely on a daily sync requirement for it to be accurate, but that said I also appreciate the fact it can be updated/improved down the road.
-
-
@mikekoski490 So you are on permanent DST now. All right.
This surely can be fixed with a watch update. The time zones and rules seem to be in there -
@Egika Thanks. Would be nice! When I asked the help desk about the possibility of some sort of fix in a future update, they apologized for my experience but said it could not be fixed, and recommended that I buy a different Suunto device.

-
@Egika Hi. Everything is working perfectly after the latest update (1.14.2) :), though the small moon icon still seems to be mirrored (my location is Eastern Europe). The moon should be waxing from right to left, but it’s the other way around. Could you please provide some information on this? Thanks a lot in advance.
-
@mikekoski490
So obviously it’s possible—if other Suunto models can do it! It’s just a software issue that can be fixed on the Core 2.
Who’s in charge of support?! I also haven’t been able to find out about the Core 2’s water resistance. Why did they add a “Dive” feature and reduce the maximum dive depth from 10 meters (Core 1) to 2 meters (Core 2)? 🫤 -
@Alpha I took mines dive mode on ,I went down 7feet am using ft metric not meters,it work perfectly
-
@mikekoski490
So obviously it’s possible—if other Suunto models can do it! It’s just a software issue that can be fixed on the Core 2.
Who’s in charge of support?!Hopefully possible, but doubt my small support case is an issue for very many Core 2 owners so likely not a priority.
The Suunto support online conversation was unusual. The online support person, who used very helpful and positive langauge (if a real person) so no issues there, but they didnt know anything about the Core 2. Kept telling me to take it outside and get a GPS fix, or to go to settings - time - toggle on/off DST. So, hopefully telling me at the end of the chat just to get a different Suunto model was unusual too.

-
@mikekoski490 Suunto support is leaving some strange impressions…
I tend to think that AI is in use quite a lot.
I made a ticket out of your Vancouver DST issue. It will find it’s way to the development department. -
@Egika Thanks!!
-
@mikekoski490 so today I decided to wait on the sunset,my phone said 6:04pm an my watch said 6:02pm in reality the sun sets at 5:44pm like looking at the time on my watch ,so am set in the Caribbean islands its way off
-
@alexx-Caesar if phone and watch agree mostly, but your obervation is different, some other effect can play a role.
Sunset is calculated for a totally flat horizon. In the evening there could be low and distant clouds that make the sun disappear before the actual sunset time.
etc.
If you tell me your exact position, we can double check the astronomical data -
@Egika ok yes am seeing this morning,when i woke up i am seeing sunset at 5:40pm an sunrise at 6:02am,i gona observe this for the rest of the weekand do a comparison with my phone an other tracking data.
-
on observation with the alti/baro in time keeping mode the arrow do work,what i understand in alti mode where ever you are,you can lock the diffrential value its stays lock in ,now where am living i hve 220ft,and where i report to work i hve 141-144ft an at the office i got 98ft.i drove to these 3 diffrent places i got the same values,at home the same 220ft even this mornig the same,so i think or feel there is improvements ,if anyone observe i would like to know.the baro trend arrow in time keeping mode even if you lock the buttons it does it job as it should,aint get a storm alert as yet,but we have rain some kinda weather so the arrow do tells what is upor down,in the baro mode i seeing graph really working its not flat,i wish i can share pictures.lastly am trying to use the watch without syncing my phone until sunday,wana see how things inprove without sync.
-
@alexx-Caesar I got the first Storm Alarm from Core 2 yesterday.
It was beeping away when I just was falling asleep…This was the pressure graph:

-
@Egika
Yeah! That really gets on my nerves, too, when the storm alarm starts beeping in the middle of the night! Isn’t there (at least in the near future) some quick way to turn the storm alarm off and on? In my opinion, tactical watches should just have vibration alerts. -
@Alpha I would tend to think, that the vibration for rare storm alarms would not justify the extra cost for a vibration motor.
These watches don’t have notifications like smartwatches.So it is either storm alarm beep off or on, I guess
-
@Egika i rather the beeping,especially when driving,other from the alarm,the watch doesnt have a a hourly chime,so when a beeping goes off i know its the storm alert.vibration alert it sucks your battery i believe.does anyone finds improvements since the new firmware?
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login