Smart sensor

Brad_Olwin · 9 Aug 2018, 17:41

@cosmecosta I think this has been hard to get at because it is not happening to everyone. Very rare for me. I have an older sensor.

Dimitrios Kanellopoulos · 9 Aug 2018, 19:01

@cosmecosta for the high readings its usually something bad with the belt. The watch AFAIK does not do it. I had those and with saliva at the belt instantly it was fixed

johan6504 · 8 Oct 2018, 06:32

My belt is two weeks old, bought a new since I do a lot more swimming now.
My Polar H10 never skipped a beat during the last year, but on the other hand it cant handle swimming…
If Suunto cant handle it maybe Polar will have a solution for it in October

SlaSh · 10 Aug 2018, 07:26

@johan6504 you are talking about v800 successor?

cosme.costa · 10 Aug 2018, 07:45

@Dimitrios-Kanellopoulos said in Smart sensor:

@cosmecosta for the high readings its usually something bad with the belt. The watch AFAIK does not do it. I had those and with saliva at the belt instantly it was fixed

The problem is that I do not see the spikes until I finish my run. @Dimitrios-Kanellopoulos do you mean that you use saliva instead of water with the belt and the spikes are gone?

Before I have the SSU I had a Ambit 3 Vertical with which I never had this problem (it was more than a year and I only changed the battery after 11 months). I have to say that the strap with the Vertical looked better than the one in the SSU with half of its life, for that reason, yesterday I ordered a new strap.

Here, you can see one of the spikes that I’m talking about, is from today’s run. This one has a spike (high area) that arribes to 217 bpm but other times has arrived to near 240 or even more. This only happens from time to time but lately is happening more often.

johan6504 · 10 Aug 2018, 09:26

@SlaSh
Yes I am

Dimitrios Kanellopoulos · 10 Aug 2018, 13:05

@cosmecosta yeah when the issue appear on watch then I correct it on the fly.

Michał Muszyński · 10 Aug 2018, 15:17

This is a known Suunto sensor problem that the company does not want to admit. I was advertising the sensor and received a new one which is slightly different than the old one, it is currently testing and I will see what will happen.

Link to the topic.
https://forums.watchuseek.com/f233/suunto-smart-sensor-belt-issue-not-accurate-data-reading-4731635-4.html

Mi_chael · 10 Aug 2018, 15:55

It’s belt issue not the sensor. Suunto send me 3 complete in 12 months.
I bought a Polar H10 but i use the Suunto for triathlon. The internal memory of H10 is not supported buy Suunto watch.

valdis830 · 8 Oct 2018, 16:38

@Mi_chael I also thought that it is always a belt, change 2 in 1 year. Lately sensor too. HR remains frozen or watch stop receiving HR data. Relocating the battery on the fly sometimes helps, but it fails again and again. Today I opened repair ticket. I’m fed up

Fatih Kale · 28 Oct 2019, 15:03

Folks,

It might be a weird question but may I ask if the Smart Sensor works while swimming?

Once I connected my watch and smart sensor and get into the water. When I check my HR. I could only see wrist HR value.

Is there an issue with my sensor?

Thanks,

cosme.costa · 28 Oct 2019, 15:04

@Fatih-Kale said in Smart sensor:

Folks,

It might be a weird question but may I ask if the Smart Sensor works while swimming?

Once I connected my watch and smart sensor and get into the water. When I check my HR. I could only see wrist HR value.

Is there an issue with my sensor?

Thanks,

I think so, I think is downloaded and synced after the swim.

Egika · 28 Oct 2019, 15:07

@Fatih-Kale said in Smart sensor:

Folks,

It might be a weird question but may I ask if the Smart Sensor works while swimming?

Once I connected my watch and smart sensor and get into the water. When I check my HR. I could only see wrist HR value.

Is there an issue with my sensor?

Thanks,

The smart sensor works under water.
It just does not transmit the data in real time since Bluetooth radio frequencies don’t travel through water.
This is why the smart sensor has memory built in to store the heart rate data internally during your activity.
Just make sure watch and sensor are out of the water when stopping the activity - then the heart rate data will be sent to the watch.

btw: I found it difficult to keep the chest belt in place during pushing off of the wall… If you use a wet suit it will work better.

Plus I am not sure how to select the chest belt as a HR source in favor of the wrist sensor (I own a Spartan Ultra without wrist sensor and it works perfectly)

Fatih Kale · 28 Oct 2019, 15:10

@Egika Thank you for the clarification.

I am not sure about choosing the HR source but I think when chest strap is connected it is prioritized. If there is no chest strap then wrist HR is measured.

Cheers,

isazi · 28 Oct 2019, 15:12

@Fatih-Kale said in Smart sensor:

@Egika Thank you for the clarification.

I am not sure about choosing the HR source but I think when chest strap is connected it is prioritized. If there is no chest strap then wrist HR is measured.

Yes, this is the behavior I also noticed.

freeheeler · 28 Oct 2019, 15:13

@Egika said in Smart sensor:

Plus I am not sure how to select the chest belt as a HR source in favor of the wrist sensor

I wonder how that works.
If you select activity without HR then neither OHR nor the belt will be recorded. If you select with HR then only OHR will be showing the values. But does the belt overwrite OHR values later? Then it wouldn’t make sense that for swimming OHR is active…?! Should be a toggle instead of automatic recognition.
I don’t use it in the water but I’d like to know because of interest.

…by the way, I like the automatic recognition

Brad_Olwin · 28 Oct 2019, 16:03

@TELE-HO @Egika If you start the activity with the belt on, the belt will have priority and if the signal is lost the belt will cache (it can record 2-3h of HR data) and resync with the watch (i.e. when you get out of the water). If you take the belt off during the activity there will be no HR recorded as it does not switch to OHR. I often start gym activities with the watch and belt and leave my watch in the locker, when I return the HR data are synced to the activity.

Egika · 28 Oct 2019, 20:20

@Brad_Olwin
Now still the question is open why the wrist sensor starts flashing during an activity that was started with the chest sensor…?!

Fatih Kale · 28 Oct 2019, 20:49

@Egika maybe I was mistaken with the OHR readings when I was in the water. Brad knows better the watches.

Brad_Olwin · 29 Oct 2019, 14:02

@Egika I will have to check this, it should not. It may flash for a moment until you see the HR symbol with the belt indicating HR is being read from the belt. The LEDs should stop once the connection occurs. There were issues with older firmware where the LEDs would continue but I believe that was fixed awhile ago.