Software update 2.30.32
-
@Mads-Hintz-Madsen interesting, I did a weight workout this morning and my TSS is updated. I agree with you as your TSS is not updated. Have you synced since the exercise? Make sure the watch syncs fully in the app.
-
@SuuntoR mine are in sync and I do not see the issues you have. I Use both standard and custom sport modes.
Vector/T6c/Ambit 3 Peak/S5 Copper/S3/S7 Ti/S9 baro Ti/S9P Ti/S9PP Ti/Vertical Ti/Race Ti/RaceS/Ocean/Wing
-
@wmichi said in Software update 2.30.32:
@Brad_Olwin Nobody. That’s exactly what I haven written: “not promised”. Sorry, I couldn’t resist to write this. I miss those alerts so much, it breaks my heart
I am with you here! I would love to have these too!
-
@Brad_Olwin I did an interval session 10x400 and after sync with the app,the values of CTL ,ATL and TSS are the same. However I do night shifts,and 2 days on the week I sleep between 8 am and 3 pm and the watch record this as a nap. So today I had a nap of 6 hours with no HRV readings. I already reported this bug previously, is not the end of the world, just to let the moderators know the bug remains. If you sleep during the day it will be recorded as a nap. And for night shift workers that will affect the metrics of recovery
-
In this thread there are at least 7 users reported that the sync between watch and app won’t work even after the update. So I would really appreciate if Suunto would figure this out. But not anymore sure if they even consider this as a bug or if they have noticed this or not. We were told before that this is a major bug and it will be fixed on the next update. But after the update, its not been fixed for the most of us and sounds like its not even regognised people closer to suunto than us. It feels little bit stupid to report the same issues over and over again. I really think this is a great watch and the update made it better. But I can’t stand that its sold to us with these training metrics etc and that one key thing and those numbers can’t simply be in line with the app. What is the point of viewing a nice new watchface with tsb etc. if the numbers are just not right. I can buy one of those 30$ apple watch ultra clones which randomly just give you some number for your heartrate without actually measuring it
I’m sorry for my tone, but this is so simple bug (it sounds to be), so widely reported, promised to be taken care of and one of the key metrics. So just goes above my understanding. But like I said, great watch otherwise and hoping this to be fixed soon.
-
I’m also on IOS, having just synced the watch and my CTL is different on watch and app. Do I care? Not particularly as I don’t look at it.
As for the scrolling - I thought it was fine before, now it’s super slick! Date is the correct configuration is good, wake up on tilt - much faster.
Race predictions now state 3 runs to predictions - I’m assuming that this has been reset following update. Fine. I’m fully aware of what I can run and in what time.
OHR - moved the watch an inch away from the wrist bone - works perfectly well for me.
Now about that barcode for Parkrun………
-
@SuuntoR one of the issues is to figure out why this is happening. If it affects everyone it is much easier. Trying to help here and maybe better understand the problem. For example, it does not happen to me testing 3 different watches.
-
@Brad_Olwin i am also on android and can see it happen!
-
Yes thank you, I appreciate that you are trying yo figure out why this is happening. Sometimes it just feels us users are considered “just stupid users who don’t know how to use the watch” if the answer is “my watch works perfectly and so does all my three watches, have you synced since the excercise? Make sure watch syncs fully in the app” and the same time there are many users reporting this problem. And also this is already a bug since the launch of the watch, but you did not have the problem even on the last software version? Anyway, thank you for trying to help us and I know your purpose is not the thing I wrote above.
I try to help also and here is a pattern how this goes at least on my watch.
Yesterday evening: watch and app ctl, atl, tsb all synced and all good
Just after midnight and synced with app: new numbers for todays ctl, atl and tsb. All synced perfectly with the watch and the app.
This morning after synced with the app: ctl, atl, tsb are not synced anymore. On the app still todays numbers like it should. On the watch back to yesterdays numbers. And those wont be corrected on the watch before powering off and back on. After that works fine for today and also possible new tss scores add fine. If the power off and on is not done, also the new tss scores don’t show up. And even if you do this power off and on, the problem comes back again tomorrow.
Hope this helps to figure out what is going on!
-
Last night sleep tracking was again spot on and in line with Oura. Especially the awake times are spot on. That’s a huge improvement for me, thank you Suunto!
Unfortunately the training stats are a complete mess. The watch shows higher total TSS of the week, higher CTL, ATL and TSB than the app. The total TSS are off by 18. I have only trained with the Suunto Race. This also doesn’t change after multiple syncs. I still have my old S9PP which I have also updated, but not used in this week. Maybe syncing the S9PP with the app after the update messed the values up…
So in my case, the watch doesn’t show yesterday’s values, but something completely different. I have not done a soft reset, by the way (this would solve it).
@Brad_Olwin Are you using the latest productive firmware on your devices?
-
I agree with the sleep tracking. And also compared to Oura numbers. It now also handles better the situations if you stand up for something but go back to sleep. So good work on this
-
@Dimitrios-Kanellopoulos sadly the freezing step counter / calories bug has not been fixed by this update - even though support told me it would.
Just happened again for the second time.
Woke up in the morning, because of activities ahead plug the Race to the charger, after charging started the day.
2 hours later, I notice: 3 steps / 0 calories.
So a restart is needed again to reactivate the step counter.
This is still an open bug.
I know some fans will immediately answer they don’t care or how dare you that you are watching these stupid numbers, get on with your life…
All I am saying is - if there is a feature, it should simply work. -
@Olaf-Gottschalk I knew the same that it should be fixed.
Do others have the issue ?
Btw they don’t get updated at all like even after hours ? Also in the app?
Community Manager / Admin @Suunto
Creator of Quantified-Self.io
youtube.com/c/dimitrioskanellopoulos
https://instagram.com/dimitrioskanellopoulos
https://www.strava.com/athletes/7586105 -
@Dimitrios-Kanellopoulos no. Stuck at whatever low number and 0 calories. App shows exact same data after sync.
Restart the watch - then the steps immediately increase as you walk.
Another problem I noticed here: the sleep is also not synced to the app. It’s in the watch, but not the app. After a restart, the sleep data is synced correctly and the step counter starts.
Both times I had this issue (first with old, this time with new firmware) were in the same situation where I needed to charge right after I got out of bed.
-
@Olaf-Gottschalk I am raising this issue internally. I’ll see what the response is. Do you think it’s related to the charging? Ie charging the watch stops calories steps and sleep sync ?
Community Manager / Admin @Suunto
Creator of Quantified-Self.io
youtube.com/c/dimitrioskanellopoulos
https://instagram.com/dimitrioskanellopoulos
https://www.strava.com/athletes/7586105 -
@Dimitrios-Kanellopoulos that is just my suspicion.
As it happened to me twice exactly like this and not any other way.Something goes wrong also with the sleep syncing when you connect it directly after waking up. That’s what I noticed in relation to the missing steps…
But as I said - with only 2 data points it’s hard to definitely answer.
-
Could you be also so kind to raise this ctl/atl/tsb/tss not syncing correctly between the watch and the app?
️ -
@Dimitrios-Kanellopoulos Good morning Dimitrios, maybe offtopic, but who knows…
After a conversation with freeheeler, I sent my log-data to suunto because the watch went blank during battery charching. Firmware 2.30.26, Suunto Vertical. Could it be a coinsident?
Didn´t want to disturb. Have a nice weekend, everybody!
-
@SuuntoR this is fixed here now if you refer to the values being displayed 0 CTL 0 TSB every morning.
-
@SuuntoR The issue was also commented after new Suunto Vertical software was launched and happens to all users with SV, SR and S9PP. Could be related to SuuntoApp not sending correct data to the watch?
