Broken Backside in the OHR sensor?
-
@Brad_Olwin by the way it is a super macro photo
-
@GiPFELKiND make sure you wear the watch face up not down. The hear rate sensor should touch your skin
-
@GiPFELKiND Easy … He only wanted to know if it came out of the box like that or after some usage.
-
@GiPFELKiND No, I am not saying you are stupid. Here is a photo of the back of my S9PP, which I wear a lot and bought when released. The HR is working for me and I am not asking for a refund.
-
@Brad_Olwin i only mean the thing in the red circle. The resr Scratch seems normal. I only mean the Scratches in the red Lining
If it doesn't challenge you, it doesn't change you. #lifewithasthma #runwithasthma #nevergiveup #pushinglimits #adventurestartshere Suunto D9, 9 Baro, 9 Peak, Vertical Ti, Race , Race s Courtney, SA (Beta) Android🏃🏼🧗⛷️🚵
-
@GiPFELKiND OMG
what are you doing with your watch? Perhaps you have hairs on your wrist like steel wool? 
I wear my watch 24/7 since may, not only for sports, also for swimming, playing on the beach in summer, working in the garden… it looks fine… it‘s Not normal that the sensor looks so scratchy -
@GiPFELKiND Does the HR work? You have a warranty on the watch! Rather than spend so much time taking pictures and posting potential problems, wait until there is a problem. If HR is clearly affected or the backing starts peeling, which will affect HR, contact support and get a replacement. My time and that of others trying help folks is limited here.
-
@GiPFELKiND I am leaning towards material incompatibility due to multiple failures on your watch(es)…
Let me explain this a bit more; materials like acrylic are susceptible to reactions with alcohol, polycarbonate will craze when they come in contact with acetic acid (vinegar) and acetone will react with polycarbonate, acrylic, PVC. That’s why you never clean a polycarbonate window with most household glass cleaners as it will haze and get small cracks to form into larger cracks.
If I knew the exact composition of the back of the watch I could point you what may be causing this.
As there have been multiple systemic failures of the backs of your watch it is more than likely something with body chemistry and a reaction is the material. I’ve seen diabetic people that produce keotones in high amounts (have that acetone sweet smell to breath) have to switch to metal eyeglass frames as the acrylic eyeglass frames will break down along the ears, temples and nose piece. People that sweat acetic acid will have their armrest on a car door get hazy.
For me, i know to never use DEET on my gear as it will cause any of my polymer gear to soften and melt. Titanium is my preference for watch bodies so I don’t have bio-compatability issues; I can rash with some nickel and copper alloys.
TL:DR in this case it’s pointing to a you not being compatible and will more than likely keep happening. You may have to switch products to prevent the same issues repeating.
-
@Todd-Danielczyk hey Todd
sounds really interesting… The thing with the ketones… I had did a ketone eating time few weeks before… Could this really be the answer? 
If it doesn't challenge you, it doesn't change you. #lifewithasthma #runwithasthma #nevergiveup #pushinglimits #adventurestartshere Suunto D9, 9 Baro, 9 Peak, Vertical Ti, Race , Race s Courtney, SA (Beta) Android🏃🏼🧗⛷️🚵
-
@Todd-Danielczyk said in Broken Backside in the OHR sensor?:
@GiPFELKiND I am leaning towards material incompatibility due to multiple failures on your watch(es)…
Let me explain this a bit more; materials like acrylic are susceptible to reactions with alcohol, polycarbonate will craze when they come in contact with acetic acid (vinegar) and acetone will react with polycarbonate, acrylic, PVC. That’s why you never clean a polycarbonate window with most household glass cleaners as it will haze and get small cracks to form into larger cracks.
If I knew the exact composition of the back of the watch I could point you what may be causing this.
As there have been multiple systemic failures of the backs of your watch it is more than likely something with body chemistry and a reaction is the material. I’ve seen diabetic people that produce keotones in high amounts (have that acetone sweet smell to breath) have to switch to metal eyeglass frames as the acrylic eyeglass frames will break down along the ears, temples and nose piece. People that sweat acetic acid will have their armrest on a car door get hazy.
For me, i know to never use DEET on my gear as it will cause any of my polymer gear to soften and melt. Titanium is my preference for watch bodies so I don’t have bio-compatability issues; I can rash with some nickel and copper alloys.
TL:DR in this case it’s pointing to a you not being compatible and will more than likely keep happening. You may have to switch products to prevent the same issues repeating.
This is the first and the best answer ever!!! Not only uhhhhhh what are you doing with your watch. THANKS A LOT
-
@GiPFELKiND it can certainly affect the material.
Acetone is a byproduct of ketosis (shows up in a urine test along with ketone). The following are not compatible with acetone.
PVDF
Polycarbonate
Polysulfone
Cast Acrylic
PVC
CPVCI can’t say for sure what the back cover material is on the Vertical is without Suunto confirming and I’m not going to offer my personal Vertical up for destructive TGA/DSC testing
but from a manufacturing side more than likely Acrylic or Polycarbonate.Either one of these will easily soften in an acetone environment and lead to the back getting scratches and stress cracks.
-
@GiPFELKiND said in Broken Backside in the OHR sensor?:
I wear it everyday, i didnt wear it while showering, i didnt wear it on poilswimming, only make Sport with this unit.
To debunk the water issue…
I have my SV since it could be ordered. I used it in a lot of watersport sessions (salt and fresh water) and rinsed it everytime after an activity. This is how it looks now:
-
@surfboomerang read the post below. There could be the answer
-
@GiPFELKiND and if it makes you feel any better, I once dissolve a vintage Montblanc Meisterstuck fountain pen into a gelatinous blob by using the wrong solution to clean it.
Alcohol and acetate don’t play nice.I consider it a $1,200 usd lesson in chemistry!
-
@Todd-Danielczyk
Thank you so much 
-
@GiPFELKiND
the cracks in the red circle look like they all or most of them have one starting point and it could as well be an exceeded point load and result in mechanical stress and cracks -
If I look to the back of my SV, it’s seems perfect (thanks to new SA activies analysis I can proudly claim that since May 16th it has recorded 296 exercices during 387 hours, 2900km, 79km elevation, and was worn H24 with sleep tracking
).
If I take time to mount my macro photo lens, zoom in zoom in again, back looks “irregular” like on @Brad_Olwin pictures.
It not eye noticable, but when highly zoom it’s not perfect…(I bet i would die if I was looking with a microscope)
But for me it looks more like small coating irregularities under the back, and very very very small surface scratches amplified by light position and zoom.@GiPFELKiND sorry for you it happens to you again. One default watch is bad luck, two is bad coincidence, three is really suspicious.
-
@Todd-Danielczyk said in Broken Backside in the OHR sensor?:
vintage Montblanc Meisterstuck fountain pen
yeah my daily driver on the paper! sorry to read that!
btw this is mine after 4 months (worn 24/7, housework, sawing wood, running on trails, sea kayaking, lots of keyboarding
). Not a single scratch!
-
@westie Same here… I have just checked my SV, there’s literally no scratch on the sensor. I guess I am not training enough
