Software release 2.30.26
-
hello community,
I have noticed that my wrist HR accuracy was really impacted by the cold weather outside. Last time I have run was <0 Celsius. It took almost 20 minutes for the watch to have realistic bpm. it was almost 30 bpm higher. Once I have cover my watch under the sleeve and wait, I got much better results. but still, we come back to the fact that we need a breast HR sensor to get better results
but until now I was very happy with wrist readings, only few hiccups, but now, last 2 run, it was off 30% of the timeā¦This is only a theory, I had tendency to pointed the new firmware responsability, but the cold weather got in the city at the same time (MontrĆ©al Canada :-))
what do you think?
-
@Antoine-Lancrenon I use mittens/gloves to keep hands warm and minimize changes in skin blood flow caused by cold weather and hence minimize impact on wrist OHR-sensor.
While running, besides SV with wrist OHR-enabled, I use Runtastic app with Polar H10 chest HR-monitor as an independent āsource of truthā (and ājust in caseā).
As a result, I have identical values of āAvg Heart Rateā and almost the same āMax Heart rateā values.
E.g., below are screenshots from Suunto App and Runtastic taken for a run that took place 3 days ago at -5 C and wind 6 m/s.
-
@Brad_Olwin not sure why this is happening, but I will keep observing it. Maybe itās not the cold temperature, but something else. Was just wondering if someone experienced the same.
-
@Pavlas said in Software release 2.30.26:
Hi, I have a new Vertical. Slept with the watch yesterday. And at night I got a notification that Iāve been sitting for a long time and itās time to move
If it was mentioned here, Iām sorry.So tonight (almost morning) the same. Time to moveā¦
-
For ohr issues it can be the case of lower temperatures
-
@Iggge Above all, I think youāve found a bug on your Polar H10 belt, which wasnāt positioned correctly, or wasnāt damp enough, or didnāt have enough batteryā¦
If youāre in the northern hemisphere and itās cold, this is a classic case. You donāt sweat as much as when itās hot, and the belt canāt measure your heart rate properly because of a lack of humidity.
-
@Arnaud-LECLĆRE I altso thougt that my Polar belt was defect. So i changed battery and all the other things. Same results.
So itās not the belt, but the software. Worked perfect with the old software, and still works great with other brands. -
@Iggge we didnāt change anything on the belt stuff.
However, keep in mind that Suunto watches use RR not the simple value of HR if the value supports it. Strava app for example only uses HR.
So wet / lube the pads , reset the belt via inserting the battery vice versa and put a new battery.
-
@Iggge I had similar problem few months ago with my H10. I changed the strap, and everything is good again.
-
@Iggge Can you try the H10 belt with two watches at same time (H10 has dual Bluetooth channel)?
When the straps are worn out that behavior is very typical: bad measures and spikes at the beggining of the activities until the strap is warm. -
@Iggge said in Software release 2.30.26:
I am using a Polar H10 pulse band. Wrist HR off
@Dimitrios-Kanellopoulos / @Iggge
may i dare probably a silly idea ? Yes i may
We and Suunto know that the WristHR toggle in activity sports mode is buggy (not effective in battery custom mode). In theory, BT HR belt should take the priority of connection at activity start over the wrist HR.
But, in this case, could one imagine that the activity begins to track HR with wrist HR and then switch to BT belt ? -
@Dimitrios-Kanellopoulos I will try it indoors, and see if I notice anything different.
Iāll try it again on the other watch to see if there is something with the belt, or the watch -
@Dimitrios-Kanellopoulos
Hi!
I resently got the vertical and this is my 2nd update. But this time it just doesnāt work: I downloaded named version, but the watch still has 2.25.66 after an error 1403,1403 after/during installing. And now I canāt install 2.30.26 because the watch says āwatch is up to dateā
I canāt find any solution to my problem and already made soft- and setting resets and on the watch, reinstalled the App too. No success hereā¦
Maybe you or somebody has a clue what I can do?!thx, Sascha
-
This AM, the watch started beeping at regular intervals. It sounded like the notification beep (I have notifications turned on). Nothing was displayed, just got the audio. I went into the notifications widget and cleared out the two notifications that were there, and the beeping stopped. Seems like there is some strangeness occurring. This is the first time this has happened.
-
@Antoine same issue yesterday ! But now the watch was changing screen alone and touch screen does not workā¦ i did a soft resetā¦ this update is not very stable (more unstable than the previous in fact
) -
I have a Concept2 SkiErg. Iāve noticed some unusual issue with syncing a custom workout.
Created a custom sport profile:
indoor rowing -> ski ergSelected custom sport profile and saved the workout.
Workout synced to iOS app, and can be seen.
Selected a Circuit profile workout and saved the workout.
2 workouts synched to iOS, and can be seen.
Circuit workout
Cross-Country Skiing <-------------------WHAT???
I will see if I can reproduce thisā¦
-
It seems that i didnāt have any alert message when was out of the route to follow.
I could have this message before update.
Did you notice that ? -
@Dimitrios-Kanellopoulos said in Software release 2.30.26:
Staged update starting on November 16th 2023
This update brings new features, improvements and bug fixes.
New features:
- Store exercise logs in eMMC
Does it means, the bug (https://forum.suunto.com/topic/9129/end-of-gps-trace-missing) is finally solved?
-
@Peter-Tƶnz Yes, this is now solved and the Vertical will handle very long exercises appropriately.
-
@Brad_Olwin very very very longs ones with 32 GB of data
Community Manager / Admin @Suunto
Creator of Quantified-Self.io
youtube.com/c/dimitrioskanellopoulos
https://instagram.com/dimitrioskanellopoulos
https://www.strava.com/athletes/7586105
