SOFTWARE UPDATE 2.33.12 - Q1 2024

[Łukasz Szmigiel]

@Mff73 I find it problematic not because it’s there, but because it’s another screen to cycle.

The workaround that I have for being unable to cycle workout screens to the left is to have just two of them and no navigation (if I don’t intend to use it). This way I either see first or the second screen upon middle button press. Or one S+ if I (rarely) use it.

It’s the same as being unable to disable the vertical navigation screen, which is strangely glued to the navigation if the route is active.

[Mff73]

@Łukasz-Szmigiel
i was just questionning myself, no judgment.
It was an option, it was remembered, it is not anymore, it is not nice, it is a “bug”.
Then, it is just few clicks to remove it, and “remove it each time” is the definition of a nuisance I got it

[Łukasz Szmigiel]

@Mff73 no problem, just wanted to shed some more light on the context of it.

[The_77]

Small bug (9PP): When using usual touchscreen off, if you go into navigation during an activity, and then go down to options like routes/POI/etc, touchscreen works, which surely can’t be intended. Can swipe in menus.

[Wilson75]

I am facing strange behavior with map also.
I don’t know if I’m misusing the map function but I remember (before update) that when I used my map during an activity, a few seconds after manipulating the map with the touchscreen to look around me, the display automatically returned to my current position. It was sometimes annoying because I hadn’t finished my research.

Now I have the opposite problem, after my search on the map, the map remains at the same location of my research and I sometimes have difficulty to get back to my current location.

I hope that I am clear

[Arnaud Lclr]

@Wilson75 double tap on the screen and the map returns centred on your position.

[Wilson75]

@Arnaud-Lclr I feel so lonely … thanks

[Tieutieu]

@Arnaud-Lclr For me it’s a “simple tap” that make the map centered again.
Anyway for me it’s a nice improvement

[Brad_Olwin]

@Wilson75 This behavior was implemented for the ruler on the map. If the map auto-centered while using the ruler it would be quite frustrating. One tap should re-center.

[fleblanc01]

@Brad_Olwin kudos to suunto, this is simple and works great

[DrSilverthorn]

I was using the treadmill activity with a custom S+ guide for an interval workout. I started the activity. I then decided to change the S+ guide to the manual interval app. So I went into settings, enabled the manual interval app and disabled the custom S+ interval guide, and then resumed the activity. What I found was that the originally selected custom S+ guide was used instead of the manual interval app.

Maybe you can’t change s+ apps during an activity and this is by design - but if so, the watch should not allow you to change any of them via settings.

And on a different matter - the OHR is ever so slightly improved for me. On a very warm day (32C+), the readings can be quite good. But even at 30C or lower, they can be spotty or cadence locked. In fact, cadence lock seems to be an issue for the OHR (at least for me).

[zanxion]

@Tami999 I solved it on my watch by doing nothing on Thursdays
Kiddin’ of course. I just realized it on mine too and it seems to always happen on the first column of the five.

[cemoi71]

I had a strange issue on my s9pp with the firmware, which leads to think that some bugs are still inside else where.
somehow a king of buffer overflow or something like that.
One day last week I trigger a training as aerobic, and 1st i activated the bleep test from suuntoplus. But delete it and and make a new one and deactivate the function (wasn’t needed obviously).
Then the next days i made the same training, and every time that i triggered it, appeared around 10 or 12 min some beep and vibrations from the watch at irregularly moments until the end of training sometimes 2 or 3 time spaced on few seconds, and was really hard for some session to concentrate me because of this.
The watch displayed nothing special different when it came.
And after a week I had a look on the app by each training, and by some of them, the bleep test data appears , by other not.
The only action that I found to stop it, was to deactivate (uninstall the suuntoplus bleep test) and restart the watch…
Had someone experiences a similar issue ?
I’m thinking about to create a separate topic of this eventual issue or bug…

[Artus Diver]

@Ecki-D, @Brad_Olwin
I would also like to get detailed information about this new functionality, but it is not in the documentation.
For me it sometimes works and sometimes it doesn’t.
To be precise, to force this new function to work, the speeds must be much higher than, for example, “autopause” and the reaction time is very long.
The guys from Suunto support suggested a factory reset, but I don’t need this function that much to lose the collected data on the watch.

P.S. I checked several times on two SV copies and this function has difficulty working in non-standard modes.
Maybe it’s accidental?
I’m curious about other users’ comments.

[Egika]

@artusdiver @Ecki-D @Brad_Olwin

Here’s some more detail about this warning:

There are two different reminders. A “resume reminder” and an “abnormal speed (stop) reminder”.

• The abnormal speed is checked only in selected activities:
  running, trail running, walking, trekking, hiking, golf, nordic walking, orienteering and open water swimming.
  The warning is triggered when the speed is >36km/h for 10s or more than 20km.

• The resume reminder is always active.
  It appears, when the activity is paused and the speed >5.4km/h for 5s

*When the reminder is dismissed, it will not pop up again with speed changes. Only after the exercise state is changed.

[Brad_Olwin]

This post is deleted!

[surfboomerang]

@Egika said in SOFTWARE UPDATE 2.33.12 - Q1 2024:

The abnormal speed is checked only in selected activities:
running, trail running, walking, trekking, hiking, golf, nordic walking, orienteering and open water swimming.

and windsurfing

[wmichi]

Since the update to 2.33.12 the touchscreen of my Vertical becomes unresponsive sometimes (in normal use, not during training). Buttons still work in this situation. The only way to make it work again is to do a soft reset. It happens once a day, sometimes twice a day and at other times it keeps working for two or three days. I don’t see any pattern. Sometimes it happens after an activity and at other times I don’t do anything with the watch for hours, and then, when I try to swipe or select a widget, the touchscreen is unresponsive. I never had this issue before the latest update.

Second thing: I am not 100% sure and maybe my mind plays tricks on me, but I think something has changed how the backlight works during training. Before the latest update, I never had any problems in changing light conditions (sun/shadows) like in a forrest, when I run below a bridge or pass a short tunnel. The backlight always came on reliably when I raised my wrist. Now the backlight always stays off. I also tested it while sitting in the sun: Hold the watch in the sunlight, then cover the screen and do the raise to wake gesture. It takes 3 to 5 seconds until the backlight turns on. And sometimes it doesn’t turn on at all. Totally unreliable…

Third thing: Again the backlight, when I am in the activity options (long press middle button during training) and I activate the toggle “Backlight”, nothing changes. Again, I am not sure (oh god my brain), but I could swear on the last firmware, this simply turned on the backlight permanently. Now this toggle doesn’t make any difference.

Anybody else with these problems?

[Sergei Ladeishchikov]

@wmichi I sometimes have problems with the screen touch, sometimes it’s after a workout on the summary page, sometimes it’s after the sleep summary, sometimes it’s just when checking the time and changing the data field on the watch face (by the way, there was one time I changed the data on the watch face by pressing my finger, but the data did not change, I tried pressing and pressing, and then the data began to scroll through on its own, without pressing. It looks like some kind of freeze.) All this happens rarely, sometimes I solve it by rebooting, sometimes I do nothing and leave the watch alone , later the touchscreen starts working.

[slurpnik]

@wmichi yes, I see the same issues. Touch screen for me became unresponsive twice so far, with at least a week in between when it worked. Also solved by soft-reset. It is somewhat annoying, but definitely does not happen every day like for you - that’s terrible!