Suunto heart rate belt with Race - major issues at the start of each exercise
-
@Dimitrios-Kanellopoulos said in Suunto heart rate belt with Race - major issues at the start of each exercise:
- change the battery. Make sure you get a non expired well stored battery. I say this to exclude kiosk batteries.
I’m using a Garmin HRM-Dual belt: with reference to this point, I have found out that it is needed a reset of the device during the battery change. I do not know if this is requested even for Suunto belt device, but by resetting mine I have solved different problems as wrong “average” HR data, frequent not expected HR variation and HR registration stalling.
-
@Egika
Worth putting this wonderful @Dimitrios-Kanellopoulos explanations in your FAQ post ? -
Thanks @André-Faria
The guy in your video suggests it needs to be under 10kOhm so mine’s in pretty good shape considering its at least 7 years old.
-
@Brad_Olwin said in Suunto heart rate belt with Race - major issues at the start of each exercise:
@DF130 should not happen and virtually never happens to me. I use the belt 6 days per week and do not have high HR at beginning of running or skimo.
Okay: then the question If you dont have Problems with your belt --> Happy suunto User. What about good solution for the question teller?;
-
@GiPFELKiND said in Suunto heart rate belt with Race - major issues at the start of each exercise:
What about good solution for the question teller?;
did you even read the whole thread?
-
Hello,
having regular problems with this belt which annoys me 3 times out of 4 I am going to ask a few additional questions…
I have the same HR belt and the same watch (Race latest firmware).I have already changed the batteries x times (I am now a pro at testing batteries before each change). I tested the resistance of the belt, no problem there. I moisten my HR belt as best I can before each use, and I launch the activity after installing my belt…… and yet my watch almost never finds my belt.
Latest serious annoyance: VVX from last weekend. impossible to connect my belt for my 80km race. I unpaired, restarted my watch and re-paired successfully but 2 minutes later when launching the activity…… no connection! the belt almost ended up in a trash can. (and i ran with the £$^%#• optical sensor).I forgot, I have 4 Garmin belts and therefore quite used to this thing. And I connect the heart rate belt without the slightest problem to a phone for running/biking.
I need your tips which are missing from the frankly light manual.
- Do you have to pair again the HR belt when changing the battery?
- When putting your belt on your chest, do you shake it to activate it?
- Is it really necessary to wear the belt before starting the activity until you see the HR Belt logo and not the simple HR heart?
- what is the time period during which the watch searches?
- If the watch does not find the belt, is it possible to activate it a little by going down in the menu to deactivate the external HR belt device then reactivate it to restart the search?
- Do you use aqueous gels under the electrodes such as electrostimulation gel?
Thanks
and yes I said that it bothers me 3 times 4 because sometimes it works in 1 second without me having to change my process.
-
@Arnaud-Lclr said in Suunto heart rate belt with Race - major issues at the start of each exercise:
I need your tips which are missing from the frankly light manual.
- Do you have to pair again the HR belt when changing the battery?
No, you shouldn’t
- When putting your belt on your chest, do you shake it to activate it?
No, theoretically it activates automatically when detects beats
- Is it really necessary to wear the belt before starting the activity until you see the HR Belt logo and not the simple HR heart?
Yes. The watch first look for the external sensor if not detected switches to the OHR and doesn’t goes back, even if the belt is emitting just before starting the exercise.
- what is the time period during which the watch searches?
Just when you enter in the exercise screen, where you can choose the different options. My 2 cents is to put the belt some minutes before you are going to start the exercice.
- If the watch does not find the belt, is it possible to activate it a little by going down in the menu to deactivate the external HR belt device then reactivate it to restart the search?
What I do is go back to the previous screen and go again to the exercise screen.
- Do you use aqueous gels under the electrodes such as electrostimulation gel?
I don’t, tap water and I didn’t have any issues with the Suunto belt not now with Polar H10 but some people improved the performance using gel.
From my experience, using the belt 5/6 hr per week, battery should last between 9/12 months and the belt around a year. Could also be that you got a defective sensor.
-
@cosme-costa Ad 1, regarding H10 I need to pair the belt again after changing the battery
-
@cosme-costa Thank you for your detailed answers.
I’m going to do a few more tests on my next runs, applying the protocol strictly. Otherwise I’ll switch to Suunto after-sales service mode.I forgot to mention, and this may be important, that I use a Core temperature sensor and that it connects every time without a problem (and that the connection itself happens without a problem long after you’ve launched the Running screen; unlike the use you confirm for the HR Belt, which has to happen the moment you open the Running screen - the why of question 3).
-
@Mff73 I reported some observations from different tests here:
https://forum.suunto.com/topic/10353/strange-behaviour-with-garmin-hrm/13?_=1715781410812
My heart rate monitor is 3 years old but I have no reasons to think it works bad (it doesn’t with other devices). I believe that for me this high/low readings at the start of the activity happen mostly when I wear a synthetic windproof jacket, but also cheap synthetic t-shirts without the jacket (it’s getting warm now!) seem to cause this problem.