SOFTWARE UPDATE 2.35.34 Q2
-
@Egika I don’t see that on the complication on the Vertical.
Or… does it depend which complication position I use? (I have it on the 09:00 position and don’t have the trend arrow).
Or…, does it only appear x hours after the update? I only updated 3 or 4 hours ago. -
@Sturgis yes I believe you need to be on route, not at your desk
-
@e6321 where? You can add the baro trend on most watchfaces.
-
@Swaddy61
If you’re using the same WF you should be able to see the trend in all the “places”
-
@Swaddy61 the trend is not immediate, at first it only shows the value, after 6/9 hours it shows the trend.
-
@isazi said in SOFTWARE UPDATE 2.35.34 Q2:
@Swaddy61 the trend is not immediate, at first it only shows the value, after 6/9 hours it shows the trend.
since the installation of the new firmware
-
@isazi That explains it! I need a few more hours to see it…
-
@Dimitrios-Kanellopoulos said in SOFTWARE UPDATE 2.35.34 Q2:
Sport mode specific display settings
Thank you Suunto for this update! Please, if possible, send thanks to Suunto team
Please, what does “Sport mode specific display settings” mean? Thanks!
-
@thailon you can configure the display behavior specifically for each sport mode.
Before the display during activity was following the general settings. Now you can set “raise to wake” and “always on” and the brightness for every sport individually. -
@zucchero said in SOFTWARE UPDATE 2.35.34 Q2:
I’m not sure if this already has been mentioned. Today I swam 1500m, but the app just shows 1325m. Where were the missing 175m lost?
Mmmmm, yeah. Yesterday I’ve noticed a similar behaviour when I swam. But I attributed it to me fooling around and trying things out. Then what happens is I updated manually in the app (the clock data was accurate). I just hope this isn’t the norm.
️
-
@wmichi Tried that and it works always on my S9PP. Thanks for the tip BTW, didn’t know it was possible.
-
@isazi Will try it tommorow on route.
Thank you very much for all of your help and please say thank you from me to Suunto team for this great update! -
@enriqueescoms said in SOFTWARE UPDATE 2.35.34 Q2:
@MKPotts That’s what I think, thanks. It’s confuse for me @Brad_Olwin ’s words saying the oposite.
I have not used my9PP much and been on this firmware for awhile. So I don’t recall being able to pause on map screen. I remember not being able to pause with the Vertical,
-
@Dimitrios-Kanellopoulos
Please bring back the double-tap to change display/complications. It’s good to customise two complications, but its also good to be able to cycle through two more by double tapping. -
Really a very unbelievably fantastic update. Thanks a lot Suunto.
I like the:
- new watchfaces
- the possibility of customization
- the climb guidance is brilliant
- data field on map was my long time secret dream
- and I don’t know what exactly UI improvement means, but something happened, because I saw better the numbers during the activity and I guess not my eyes got better
- thank you to getting back automatic map centering
- OHR really improved, I realized it because since update my Smart Heartrate belt cannot connect to the watch
Beside that, some question came into my mind, like:
- with watch face customization the interactive or changeable fields on watchface is gone?
- maybe in a next update is the possible to make datafield on the map changable? For example to show HR on the map?
- what means and where can I find: “Sport mode specific display settings”?
- HRV belt connection is an known issue?
But keep the good work, thanks a lot
-
@kamarasm said in SOFTWARE UPDATE 2.35.34 Q2:
Really a very unbelievably fantastic update. Thanks a lot Suunto.
Beside that, some question came into my mind, like:- with watch face customization the interactive or changeable fields on watchface is gone?
yes. fixed fields now but with higher variability in the selection
- maybe in a next update is the possible to make datafield on the map changable? For example to show HR on the map?
I hope so too!
- what means and where can I find: “Sport mode specific display settings”?
has been answered above
https://forum.suunto.com/post/147671- HRV belt connection is an known issue?
no. this should work as normal. I use mine constantly with many watches and new FW… You seem to have a different issue here. Maybe start a separate thread about it.
-
My main concern about most of the old and new watchfaces is that while they look nice and “professional” when shown in full display brightness, they look rather “poor” when the raise-to-wake is set to low brightness, the thin lines used made the display esthetically unpleasant (on Race at least), this is worsened by the fact that in many of them the time is also shown out of centre, giving to me a sense of “incompleteness”. A top sport watch should never look like a toy. My suggestion is to increase the line width for the low display brightness option, and possibly to show centered data for a more symmetrical and pleasant view.
-
@Stefano-M64 the data is shown that way because it moves, slightly, to avoid stressing the same pixels all the time and killing the display. Unfortunately, AMOLED does not have the same life span of MIP.
-
@mdtremblay said in SOFTWARE UPDATE 2.35.34 Q2:
@Dimitrios-Kanellopoulos
Please bring back the double-tap to change display/complications. It’s good to customise two complications, but its also good to be able to cycle through two more by double tapping.Yeah I love new customization system but would want to set at least two different data-type on each place.
-
@isazi I agree and I would add on AMOLED the more pixels is on, the more it consume. So, the thin lines is surely to lower this power consumption in AOD display.