SOFTWARE UPDATE 2.35.34 Q2

[Antoine Lancrenon]

@jjpaz Hello,
I have shared also in this thread issues regarding the charge.
nothing really work for me, i have changed all configuration related to battery draining, got better results yea but i never went beyond 10 days ich with my solar vertical… i should get 20 days at least with my current usage.

i have finally decided to do a soft reset (from the watch, where it does reset all the parameters) with the latest FW. it took ~10 minutes, the smae to put back all parameters.
until yesterday, I had done only watch reboot (turn it off and on again)
Since the soft reset, it seems that it fixed my drainage issue. its been since yesterday 11PM. until this morning 9AM, i was 99% and I am still 99% and a small walk 40 minutes with GPS already registered!
Now we are talkin, I will let you know after several days, but I have a good feeling about this, finally My Suumto Vertical Solar at its full potential!

[The_77]

One extra thing I’ve noticed - I’m actually getting stand up notifications for the first time ever since the latest update, whilst sat down to do work. Shows the filter change at least!

[Bojan Mitrovic]

@isazi
I have a problem, the weather complication doesn’t change/updates the temperature, even after I go to the weather widget… Only after I sinhronyze with Suunto app… Before the update it worked with no issue… Anybody have this problem, or a solution? Couple of people reporting same problem on FB…
,

[Antoine Lancrenon]

@The_77 said in SOFTWARE UPDATE 2.35.34 Q2:

One extra thing I’ve noticed - I’m actually getting stand up notifications for the first time ever since the latest update, whilst sat down to do work. Shows the filter change at least!

i have also since last update. seems to work much better, as it seems accurate for my case!

[wakarimasen]

@Antoine-Lancrenon said in SOFTWARE UPDATE 2.35.34 Q2:

@The_77 said in SOFTWARE UPDATE 2.35.34 Q2:

One extra thing I’ve noticed - I’m actually getting stand up notifications for the first time ever since the latest update, whilst sat down to do work. Shows the filter change at least!

i have also since last update. seems to work much better, as it seems accurate for my case!

Same for me - my first one today

[giuliosq]

Hi all, one question for my vertical… whiy the software download is not available yet? it says my watch is updated but not yet on this new version. Should I wait some more time? Im in italy. thanks

[Tami999]

@giuliosq What is Your current version? Its 2.35.34 now.

[MeazzaS9]

@giuliosq strange, I’m also in Italy and the update was available on the first day

[fondueaufromage]

@MeazzaS9 Download of the update should be automatic if you have WiFi but then, you have to install update on your watch manually : parameters > General > Update

[A Former User]

Hi, today i had football/soccer Game. And after the game in workout summary on Race S I saw regeneration time - 36 h. So, there is any solution like in Garmin to view how long, how much time I should rest before next game? Or there is any other view with regeneration time . I’m fresh as a Suunto user so I need help.

[giuliosq]

@Tami999 Its 2.33.16, thats why I’m suprsied… it has always been automatic, and if I go to sofware update it says “software is updated”. Dont know what to do… I’ve shut it off and rebooth, put it close to the router but nothing

[Łukasz Szmigiel]

@giuliosq check if suunto app is in its latest version. Open it, sync the watch and tap the watch icon. Then look for three dots, informations and updates. Do you see an update there?

[false]

@Antoine-Lancrenon said in SOFTWARE UPDATE 2.35.34 Q2:

i have finally decided to do a soft reset (from the watch, where it does reset all the parameters)

What then is a hard reset =)) Anyway if it helped then it’s good

[giuliosq]

@Łukasz-Szmigiel Thanks all for the support. I found what the issue was. I checked from the phone throught the app/watch settings and realized that the donwlaod of the firmware was kind of still at 5MB without proceedeidng. So i deleted the wife line and reconnected it, only there it finally was able to download fully the firmware. So I solved through the phone and not throught the watch. Thanks a million everyone

[Dimitrios Kanellopoulos]

@krzysMac The recovery time is cardiovascular recovery time to top performance. Not how much you should wait.

[Luis Andés Olmedo]

Regarding those new “Sport mode specific display settings”. Could anyone explain why the feature is displayed in Suunto SW page for vertical if that is not something we can use in the Vertical? https://www.suunto.com/es-es/Asistencia/Actualizaciones-de-software/Notas-de-lanzamiento/suunto-vertical-software-updates/

Would be better to show only the updates/improvements applicable for Vertical.

Thank you!!!

[A Former User]

@Dimitrios-Kanellopoulos
Hi. Ok i understand, but, i’m new in Suunto. In which widget i can find info about recov level and traning readines? Resources or TSB? Maybe in new watch, my is Race S i schould wait until my watch will learn my fitness life?

[borgein]

@Luis-Andés-Olmedo said in SOFTWARE UPDATE 2.35.34 Q2:

Regarding those new “Sport mode specific display settings”. Could anyone explain why the feature is displayed in Suunto SW page for vertical if that is not something we can use in the Vertical? https://www.suunto.com/es-es/Asistencia/Actualizaciones-de-software/Notas-de-lanzamiento/suunto-vertical-software-updates/

Would be better to show only the updates/improvements applicable for Vertical.

Thank you!!!

I agree. I thought we could finally configure “raise to wake” (raise to wake for backlight on) for each sport mode. I would love to have Raise to wake backlight on my Vertical for my activities, but I don’t want raise to wake backlight when I am not doing activities.

[Antoine Lancrenon]

@false yes, it is a hard reset finallly… sorry about the confusion.
i think i spoke to early, I have reactivate yesterday the the over the air and wifi on the watch from the cellular. to have my maps back. i didn’t download any maps yet (it will take various hours to do that), but now that I have the wifi set, I have lost 4% of battery in less than 24hrs… is the wifi oTA is the culprit of battery drainage? this is crazy!

again, I have the vertical solar version.

[Luis Andés Olmedo]

@borgein said in SOFTWARE UPDATE 2.35.34 Q2:

@Luis-Andés-Olmedo said in SOFTWARE UPDATE 2.35.34 Q2:

Regarding those new “Sport mode specific display settings”. Could anyone explain why the feature is displayed in Suunto SW page for vertical if that is not something we can use in the Vertical? https://www.suunto.com/es-es/Asistencia/Actualizaciones-de-software/Notas-de-lanzamiento/suunto-vertical-software-updates/

Would be better to show only the updates/improvements applicable for Vertical.

Thank you!!!

I agree. I thought we could finally configure “raise to wake” (raise to wake for backlight on) for each sport mode. I would love to have Raise to wake backlight on my Vertical for my activities, but I don’t want raise to wake backlight when I am not doing activities.

That is what I was expecting… and also the backlight intensity per sport mode.