SOFTWARE UPDATE 2.35.34 Q2

false

benlap

I want to be able to cycle through complications like before this last update. This watch just lost a lot of functionality for me. Suunto Race.

ggrego

@jjpaz même problème j’ai réinitialiser la montre et le problème est résolu

Iggge

Last update regarding step counter. Hope Suunto is aware and working on it.

My Suunto Vertical: 12899 steps. (On 100%)
Samsung Galaxy S 23 Ultra 21404 steps (on 80%)
Garmin 245 Music: 20.900(on 80%)

Fwinns

I too seem to have the battery drain issue on my vertical since the update… and step counts are much lower than they were before the update.
Is it possible to downgrade to the previous version while waiting for a fix for the battery drain?

Marton Attila

After you completely drain your battery and charge it from 0% to 100% it’s working now. I have 7 hours of workout this week with best GPS mode and one suuntoPlus (burner) active. From 100% down to 82% this week day 6 with total 7 hours workout best GPS mode. It’s working!

I can’t speed for non solar version vertical.

false

@Marton-Attila good to hear but it’s just a coincidence, many of us did the same and got nothing. I believe in most of the cases drainage is a software problem not a hardware

Mff73

@Mff73 said in SOFTWARE UPDATE 2.35.34 Q2:

Vertical has less emoji than S9PP?

Serious bug, my wife is receiving and and not me ?

Still not a serious issue, but just strange that two watches, receiving same messages, don’t have same avaliable emoji.
Is there any technical explanation?
Unlogically, S9PP with less memory, is decoding more emoji.

thanasis

the main 2 issues i have so far

the pause screen bug where if you start moving and it shows the message the activity has been detected you cannot handle the buttons (it’s a bug for sure and i hope the team here could forward it copying @isazi @Dimitrios-Kanellopoulos )
the sudden battery instability that i thought was not a case for me but there is something strange indeed. For instance without any activity and the oHR disabled i got a 3% drop in 3 hours today! And then again yesterday then was 10% in a full day (wasn’t great but i didn’t really bother) . Previous days was like 10% for 2 days with activities involved (all of these with the same firmware)

The steps and the rest that are mentioned here so far had no impact on me. Even the open water swimming was spot on this time

Dimitrios Kanellopoulos

@thanasis I would not worry about the battery yet. Let it go to 0 first.

Fwinns

@Dimitrios-Kanellopoulos That’s an issue when you’re planning a long ride/run and you need to be sure you’ll have enough battery. There’s definitely some range anxiety associated to the “~20% displayed but really it’s 60 or 70% left”

Mff73

@Fwinns
To avoid anxiety, you can also plan to put the watch on the charger for a couple of minutes. .
Or try the common tip to let the watch discharge fully once, and only then report battery drainage. It could be a real FW issue, but before, everyone should have tried that tip.

Fwinns

@Mff73 I will let other test those theories for me, a couple of minutes is not enough when you have a ~24-30h ultra trail in two weeks
In the meantime going back to the previous firmware did the trick for me, no more battery drain, everything back to normal

false

@Fwinns I love such theories too :))
how did you install previous firmware? I wish I could do the same

Fwinns

@false there’s another topic on this forum, somebody kindly showed the procedure:
https://forum.suunto.com/topic/11116/firmware-downgrade-to-2-33-16-1/8?_=1720979544607

false

@Fwinns thanks! Will try on my 9pp later

Upd: it’s really nice option to know, but unfortunately for me, previous firmware is the only option. I say unfortunately because my battery was spoiled by November’s 2.30.32 update, long time ago. Of course I have little hope for bugfix, because IMO, starting from 2.30.32, suunto doesn’t care about software quality

alschmid

@Tami999 said in SOFTWARE UPDATE 2.35.34 Q2:
… I only miss old option to click on and fast-change, date + battery on one and on second one alt + solar for example. Now everything is static.
I hope maybe in future we will get old-way + with option which widgets/icons will be changed after tap, that would be perfect.

That seems to be a pattern: throughout the last updates for the Vertical (Solar) have they discarded in their design principles quite some requirements for customization.

Despite the hardware affording swipe and touch functionalities have customization options with widgets and screen orders in the software been removed. I find that a pity.

I see the engineers’ need to optimize for software and battery performance. However, from a user’s perspective, I find their prioritization over customization options afforded by the watch out of balance.

alschmid

@Łukasz-Szmigiel But the tapping functionality for scrolling through multiples of them is gone, no?

GiPFELKiND

@alschmid yes is gone you can only choose 1 value. No Tapping…

alschmid

@isazi Hi Alessio. It would be a nice prospect if such customization options like the “multiple compliactions” or also the “swipe left/right through widgets” were to be brought back…

I guess some irritation here in the forum comes from engaged SUUNTO users not understanding based on what grounds or principles decisions are taken re the further development of the firmware.

Changes such as the removed complications switch tapping or horizontal widget swiping might be less irritating if they were to follow a comprehensible logic.

Would you therefore mind sharing a bit more in detail on who the involved parties are exactly and how the decision process roughly looks like in “Suunto will gather feedback and act accordingly”?