Suunto Software update Q1 (2.53.42)

marcus fox

@isazi thank you

Elipsus

@safari said in Suunto Software update Q1 (2.53.42):

bu neden olabilir?
bu sabah test ettim.
telefon gerçek kuzeyi gösterecek şekilde ayarlı ve kalibre edildi.
saatte de magnetik sapma açısı girildi ( bölgem 6.4" dü 6.5" girdim sadece) ve kalibrasyon yapıldı. ama bir çok alanda denedim manteyik alandan etkilenmesin diye.
sonuçta ikisi de kuzeyi farklı gösteriyor.
ayrıca bulunduğum rakım da 100 m
( bu arada doğru olan İphone un kuzeyi)

我不明白 (it means, “I don’t understand in Chinese”)

I ran i thru a translator, but please refrain from using any other language than english on the forum.

About your issue, the vaslty different north is probably a calibration issue on the watch), the declination adjustment is just an offset, so this error (of 45°) is definitely not because of the 0.1° declination error
Maybe the magnets in the iphone are causing troubles to the watch ? Are you sure the iphone is showing the true north instead of the magnetic north too ?

inkognito

@Elipsus Not to mention, his phone and watch are both sitting on a laptop in the photo, which is guaranteed to throw off the magnetometers. Should I lodge a complaint too?

Egika

@inkognito
it helps if you were present in the physics class at school…

safari

@Elipsus
I’m using Google Translate.
From Turkish to English. Not Chinese.
I just pasted the wrong part and didn’t realize it afterwards.
I apologize for that.
Yes, it was tested with a real compass.
Calibration was done.
Please remember that I’ve been using Suunto for 15 years when making suggestions and recommendations. I wouldn’t write here without doing simple checks and tests.

safari

@inkognito These tests were conducted in an open area. I only put the camera on the computer screen when I took the photo. I’ll send videos of the tests done in the steep forest.:)

inkognito

@safari Sorry for the silly jokes, mate, I was in a bit of a cheeky mood during my coffee break. Anyway, both my Vertical and my girlfriend’s Race S show the true value within 1-2° precision when compared to a real compass. There might actually be something wrong with your watch if it shows different values…

safari

@inkognito
No problem, these things happen in life.
I mainly do comparisons with an analog compass (Suunto MCA).
It might give different values too.
My mistake was sharing a different image than the one from my test.

Elipsus

@safari I added the chinese part because that how it felt to me when I read your post lol.
No worries, you can edit your post to put the english version instead, so future reader won’t have troubles.
Think of the declination as a simple offset between the “true north” and “magnetic north”, so a 1° error in decliation will result in a 1° difference between the true north and magnetic north, so, what you are showing is not an issue with the declination.
Analog compass will only show you the Magnetic north, if you set the Declination offset to 0 on your watch, you should have the same value.
As other mentioned, the compass integrated in watches is pretty sensitive to even simple metal stuff (the spoon in the example is "redirecting " the magnetic field along the spoon axis, thus changing the direction of the field near the watch), so its only really usable in the “wild” and far from other metallic stuff

Giorgio60

@tuxbuster Scusa ma nin volevo fare il divertente. Ho tralasciato il fatto di aver resettato l’orologio, e tutto è tornato normale. Scusami se ti ho dato un idea sbagliata. Grazie

safari

@Elipsus said in Suunto Software update Q1 (2.53.42):

Analog compass will only show you the Magnetic north,

DrSilverthorn

I recently did a settings reset on my watch because I was getting crashes on longer runs, where the watch would stop the run, and the watch face would display. This seemed to be occuring when I had the navigation display up.

However, since doing the reset, I no longer have the option to change any of the metrics displayed in the tooth on the navigation display. Those settings are now missing. I do however have pulse rate displayed, but I cannot change it, even by enabling touch on the map and tapping it.

So it would seem that ‘reset settings’ is not working as desired with the new navigation settings functionality.

EzioAuditore

@DrSilverthorn Have you selected other data fields for the ‘tooth’? Once activity is started > Map screen > Options (down button) > Data fields.

DrSilverthorn

@EzioAuditore ha. Well I could’ve sworn it wasn’t there earlier. But now it is. I must’ve been mistaken. Thank you.