Tide table on vertical 2
-
@MikeC30 I’ve asked about this on another thread but so far there’s been no clarification. I’m 100metres from the sea near Arisaig and mine just says ‘Scotland’. I would very much like to know where the data is taken from - if it’s a tidal reference port it really needs to name that. I asked if the system was clever enough to calculate tides for the exact location but I stand to be corrected. I doubt this is possible due to local variations etc and in any case (sorry if you already know this) most calculations used for planning etc are based on times plus or minus reference ports so for practical purposes I think that would be better.
Comments were made in the other thread about other better sources for tidal info - I agree but I like having it on the watch as well and have found myself referring to it regularly. -
@MarkG in my experience I got “Italy” when far away from the sea, or various town names when closer. Tested it in Italy and the Netherlands. Maybe there is an issue with your specific location that I can report.
Watch: Suunto Vertical 2 Titanium Black
Blog: isazi's home
-
@isazi the best Option would be to make a actual poi in the suunto map in the App and from this point you will get the nearest Tide Infos. This Automatic Location is not good sometines!
-
I continue to have issues as well with the tide widget. I was on the west coast of Scotland beside the sea near Fort William at the start of the week and the widget started working again but still only gave my location as Scotland. I’m back on the east coast of Scotland again and the widget is not working. I am standing right beside the sea as I type this.
-
@MikeC30
It does not work for me either, I tried also the air plane mode, reset the app, restart the watch. I am 300m from the sea and it does not work.After last update also battery status is doing strange things. I was snorcheling and received 5% battery remaining warning. After ending sportmode the status was 10%
I recharged to 99%.
I was cycling for 1,5h and went swimming for 30min, it dropped to 90%, which is more than usual. After restart (as above) it changed to 93%.
️ -
@matus69 are you also in Scotland?
-
just to make sure:
You all have location permission for the app?
You have tapped the update now button in the widget
and you have synced the watch with SA afterwards? -
Yes. To all these questions. Thanks
-
@isazi No, Istria
-
@Egika
Also yes to all. Still just giving location as ‘Scotland’ I’m actually not that far from Fort William mentioned earlier.
I’ve just compared it with local tide tables and it’s about 40 minutes and 0.3m wrong on the low tide forecast for Mallaig which is just up the coast. Not big errors but potentially critical for threading a sea kayak through various local channels.
For example - close to me there is an island (Eilean Ighe for those who know the area) separated from the mainland by a narrow channel. I know I can paddle through this when the height of the tide at Mallaig is 3.5m. If I get this wrong then it’s normally straightforward to go round the outside of the island. But if the weather is severe (or unexpectedly deteriorates) timing for the channel to avoid the conditions is important. Now of course I can use other resources to plan this but it’s a shame if the watch can’t give me that information. An example would be a leisurely long day, no weather or tidal stream issues, arriving nearby at an unplanned time and just deciding the best route back by making a quick check to see if the channel is open or not. -
Tide widget started working again today. Watch hasn’t left the house in the last 48 hours so I’m not sure what has changed. Perhaps Suunto has been working behind the scenes to fix it?
Still not sure where they are getting their tide data from as it differs a bit from the tide tables of both my nearest ports. High and low tide times are out by between 10 and roughly 20 minutes on the widget. Still gives my location as Scotland, UK.
-
That’s the tide widget not working again in my location. After its update on Sunday it has not updated any data since then.
-
@MikeC30 Hi, I have exactly the same problems than you, living at 200 meters from the sea in Brittany (France).
It will be nice to understand how this applet is working. Is there an API authorized to refresh the tides table only for a (too !) short period ?
Can someone explain how should work this applet ? Can we verify and understand the sources somewhere in Github ?
Regards -
@bruno.tanqueray what do you need to know? Data source and refresh window?
Suunto might use Github as their code repo, but we’ll probably never see it, as it’s proprietary code containing their trade secretes.
-
there are some things special with tides.
But basically, if you open the widget, it should at least trigger a sync, that then should update tides the next time, the phone syncs.
Provided, you have location permission for SA in your phone on. -
Sadly, this does not work, again. Given that other people are also having this issue, it makes me think it is probably a Suunto issue that needs fixed by them and not a user issue.
-
@MikeC30 this is well possible.
-
@Ze-Stuart Yes: data source and refresh window, plus the trigger logic.
To be clear, I am not asking for the source code, I know it is proprietary. I am asking for the documented behaviour of the widget, which is not a trade secret.
Why it matters: this thread is going in circles. We are all asked “location permission? tapped update? synced?”, we all answer yes, and then it stops. Without knowing what the widget is supposed to do, we cannot test anything, and Suunto cannot get a useful bug report from us.
My case: Brittany, France, 200 m from the sea. Sometimes tides load during a normal sync, right after the weather. Most of the time nothing loads. Same phone, same place, same procedure : the result is random. And when the widget is empty it offers to sync with my Iphone, but the app does nothing because the watch is “busy”, so that button seems useless.
What we need to know:
- Which provider supplies the tide data?
- Is the tide computed for my GPS position, or for a reference port that may be far away? (The watch only shows a region name.)
- What triggers a refresh : opening the widget, a phone sync, a background schedule?
- Is there a cache duration or a request limit per day? That alone could explain why it works once and then stops for days.
- What is the official watch/app sequence? If we follow it and it still fails, it is a bug, not user error.
Thanks.
-
bruno.tanqueray said:
@Ze-Stuart Yes: data source and refresh window, plus the trigger logic.
To be clear, I am not asking for the source code, I know it is proprietary. I am asking for the documented behaviour of the widget, which is not a trade secret.
Why it matters: this thread is going in circles. We are all asked “location permission? tapped update? synced?”, we all answer yes, and then it stops. Without knowing what the widget is supposed to do, we cannot test anything, and Suunto cannot get a useful bug report from us.
My case: Brittany, France, 200 m from the sea. Sometimes tides load during a normal sync, right after the weather. Most of the time nothing loads. Same phone, same place, same procedure : the result is random. And when the widget is empty it offers to sync with my Iphone, but the app does nothing because the watch is “busy”, so that button seems useless.
What we need to know:
- Which provider supplies the tide data?
- Is the tide computed for my GPS position, or for a reference port that may be far away?
- What triggers a refresh : opening the widget, a phone sync, a background schedule?
- Is there a cache duration or a request limit per day? That alone could explain why it works once and then stops for days.
- What is the official watch/app sequence? If we follow it and it still fails, it is a bug, not user error.
Thanks.
-
@bruno.tanqueray I understand your questions.
Just you know this is a user forum, so everyone can only share what he/she knows.
I know that it works for me.
When the watch is connected to the phone (iphone in my case) and SA is running at least in the background, tapping the refresh button in the widget shows that tide data is being updated and it also shows success.I have no clue about your other questions. and I don’t know if anyone has.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login