Update time in Europe?

Nigel Taylor 0

ie -

THIS…

(the sleep bar appears more purple tinged in real life)

…with the Activity and Sleep icons and lines (and ever so slightly gradient filled shade from the top), is significantly better than THIS…

…in terms of glanceable usability and giving a context to the day.

I’m guessing also (by the difference in slope), that after waking today, my first 2hrs are the ‘stressed’ hours, and the next 2hrs are inactive…a VERY SLIGHT red tinge to the grey might make that really visible.
(although @Dimitrios-Kanellopoulos states that a 30mins can contain multiple types, I don’t believe that, the numbers add up to a whole which would indicate a 30minute segment is tagged ultimately as stressed OR inactive OR active OR recovering, (OR - not AND ) - it obviously is the case that individual minutes might be stressed or inactive or whatever, which is maybe what Dimitrious is referring to, but I guess there is some aggregation after each half hour period that decides what SINGLE bucket to tip a half hour segment into?).

Dimitrios Kanellopoulos

@nigel-taylor-0 the 30 minute time window that is represented and stamped as one unit can have multiple states.

Look at your watch now at 13:27 (my time) and you might be recovering. Start an activity, then it will be active. I suppose it will be in the end recovering (as 27mins were recovering)

But yeah the app needs a bit (or more) improvement to align with the watch

Nigel Taylor 0

@dimitrios-kanellopoulos said in Update time in Europe?:

@nigel-taylor-0 the 30 minute time window that is represented and stamped as one unit can have multiple states.

Look at your watch now at 13:27 (my time) and you might be recovering. Start an activity, then it will be active. I suppose it will be in the end recovering (as 27mins were recovering)

But yeah the app needs a bit (or more) improvement to align with the watch

Hmm, and I guess looking at my Watch pic above, the activity does show to be “sightly less than” 2 bars…(I did an easy 45mins recovery run). So what you’re saying does add up.

But yeah - bash the best bits from the S7 Watch GUI into the Phone App and everyone is happy!

Dimitrios Kanellopoulos

@nigel-taylor-0 remember this could benefit us (s9) users that dont have those nice markers on the watch

Brad_Olwin

@дима-мельниченко I have been sleeping with both the S9 and S7. They agree quite well. The S7 provides a bit more information about the type of sleep but otherwise, the HR data, Resources and Sleep times are in good agreement.

ianarg

@aleksander-h I just use the android app syncmytracks to move the withings scale info to my various accounts including Suunto and Strava.

olymay

@ianarg said in Update time in Europe?:

@aleksander-h I just use the android app syncmytracks to move the withings scale info to my various accounts including Suunto and Strava.

It syncs the weight from Withings to Suunto? Where in the Suunto App is it shown? The only place I can see currently is in the watch.

Aleksander H

@olymay said in Update time in Europe?:

@ianarg said in Update time in Europe?:

@aleksander-h I just use the android app syncmytracks to move the withings scale info to my various accounts including Suunto and Strava.

It syncs the weight from Withings to Suunto? Where in the Suunto App is it shown? The only place I can see currently is in the watch.

I think this is SyncMyTracks being misleading. I believe they are actually syncing agains Sports-Tracker rather than Suunto, and Sports-Tracker does indeed allow specifying weight on the profile page.

Incidentally, I’ve always been sceptical of SyncMyTracks. Last time I used it, they wanted me to enter my username and password directly into the app, rather than redirecting me to said services login pages. I completely forgot about it until @pavel-samokha mentioned it recently in a different discussion.

Jamie BG

@brad_olwin
Very happy with the sleep tracking - matched very well with my CPAP machine in terms of duration, start and stop times.
Based on CPAP info the sleep stages could be ok - but could only tell if brain is hooked up to measure brain activity.
But looks good and is certainly impressive.
Would love to see the sleep stages graphed against time as they are when viewing in google fit. Gives an awesome representation (of course no idea if accurate, but looks good).

ianarg

@aleksander-h @olymay i’ve used it for a few years seems ok and reliable to me. Yes it syncs to your profile weight in Suunto app. Perhaps i slightly mislead you, i sync Withings to Google Fit for the weight, then Google Fit is sync’d through SyncMyTracks to my other services including Suunto App. In Suunto, if you go to settings\user settings the weight changes in there.
So my config is Withings to Google Fit, then SyncMyTracks to various services from with the source of weight being Google fit and Strava being the source for activities. Works for me.

ianarg

I’m also not getting heart rate or steps in google fit now. It is connected to Suunto on the watch and to my google account. I have disabled steps and heart rate directly in Google fit on the watch, as i don’t want to duplicate the data and reduce battery life.

I’ve logged a support ticket with Suunto to find out how this should work, they are creating the same setup on their equipment and will get back to me in the next 24 hrs.

Jamie BG

@ianarg are you referring to the phone or watch?
Phone - getting steps (though its not matching suunto, and have turned off sensors for google fit watch and phone, so not sure where it is getting its data from). Am not getting HR expect for when tracking activities. Everthing else is flowing through fine.
Data is showing up fine in Fit Goals on the watch, including HR readings on Fit Heart Rate (so suspect this is more of GFit server/phone app issue than anything to do with suunto).

ianarg

@jamie-bg thanks for replying. On both watch and phone no data flows from the suunto 7 unless I’m performing an activity. So the new built in suunto heart rate and steps do not end up in fit as I’d expect. I’ve disabled step counting in fit and newer rate so not to double count and reduce battery life.

However the sleep data is syncing fully. I’ve logged it with suunto support to see if it’s by design or a bug.

pilleus

Click on a complication on the new watch face to open the referring app (steps or weather or altitude). Coming back to the watch face, the icon above the number in the little circle will disappear.

Most of the time I have a completely black background, sometimes with a delay of 5 seconds the colored background.

screen (1).png

screen (2).png

Aleksander H

@ianarg said in Update time in Europe?:

@jamie-bg thanks for replying. On both watch and phone no data flows from the suunto 7 unless I’m performing an activity. So the new built in suunto heart rate and steps do not end up in fit as I’d expect. I’ve disabled step counting in fit and newer rate so not to double count and reduce battery life.

However the sleep data is syncing fully. I’ve logged it with suunto support to see if it’s by design or a bug.

I installed Google Fit on my phone yesterday and connected Suunto on the watch. I’m getting steps, but they might be sourced from Google Fit on the watch, I’m not really sure. Currently the numbers do match up though, which they didn’t do last time I had it connected.

I have the same issue as you with heart rate though. I only get heart rate into Google Fit for time spent inside an activity.

How does one see if the Google Fit step tracker is activated?

ianharding

@pilleus same issue with the Solstice background. Sometimes it appears straight away, sometimes a few seconds delay, but more than half the time it remains black.

pilleus

@aleksander-h said in Update time in Europe?:

How does one see if the Google Fit step tracker is activated?

In Google Fit on the S7 go to settings and deactivate “record activities”.

olymay

@Aleksander-H @Jamie-BG

I have also turned off all Google Fit sensors on my watch.

~~I am getting steps synced from Suunto to Google Fit, but there appears to be quite a lag and looking at yesterdays figures the count in Google Fit appears to be roughly 15% lower than that in Suunto.~~

EDIT:
I am not getting steps synced from the Suunto App to GF, the steps in GF were coming from the activity tracking in my phone! The reason they were lower is because I am not always carrying my phone.
I have now turned off activity tracking in my phone (I thought I had already done this but maybe I forgot when I upgraded my phone in December).

No HR is syncing from Suunto to GF unless I track an activity, this is really frustrating. It would be really nice if this would transfer across, even if it was just once at the end of the day.

If you go into the Suunto App on the watch and into the GF connection settings, it does state that only HR from an activity will be shared

olymay

@pilleus I’m having this too, but so far I have only seen it with the Suunto step count complication. The icon disappears but the number remains.

This did also happen before the update and the new Solstice face, but does seem to be more common now (in my opinion).

Oh and in the past it was mostly happening with the battery icon and also on the ambient display.

Aleksander H

Why is the Google Fit integration part of the watch app, rather than the phone app? If it was integrated via the phone app Suunto 3/5/9 and Spartan devices would also be able to benefit from Google Fit integration.