SW update 2.37.34 Q3
-
@BrunoH I had some trouble getting my head around all of this… So I started reading some of the material on the suunto website.
All in all… the generic formula does not work well. You have to make personalised stress tests to get the limits. Now with ZoneSense there is the argument that you can use this new inovative feature, and it will start reporting the thresholds for you without the need to perform and put yourself through the testing process.
-
@BrunoH
If the HR detected by the watch is correct, then your max HR should be at least 185 as you peaked over the 180 mark a few times. Those calculators are not that good at this. It’s hard to tell your real max HR without the lab test, but 185 should probably be close. -
@Prenj @SvenSchroeter @Mff73
Thank you everybody, I will adjust my max HR and the zones accordingly. I’ll try again in a few days. -
@BrunoH I got a little stressed about all this at the beginning… but stopped worrying about my MAX Hr, and looked more closely at the LTHR value and then worked backwards from there.
I based my LTHR on hard run efforts at 5km and 10km distances (as I repeat these periodically as part of my standard training approach).
The new innovative ZoneSense feature (Suunto +App) is giving me relatively close LIMITS to what I had set so all in all it seems to add up.
Plus I got the Hr Belt from Suunto to try and get the most accurate readings possible.
PS. I am a Male / 38Years old / LTHR = 165bpm (approx) and have a 182MAX HR according to the formula… but do not even come close to that during maxed out efforts (measuring with the HR belt).
But even if the data is not absolute, because there will always be some error in the measurements (we do not carry medical devices on our wrists) as long as it is repeatable we can use it as a baseline for general imrpvement metrics. Which is the goal of everyone I think… Personal improvement both physically and mentaly.
Have a nice day everyone.
-
@BrunoH
as @SvenSchroeter suggested, if you are using a chest strap with RR capabilities, you could try ZoneSense analysis while changing your zone.
Maybe set them as appropriately as possible with reasonable max HR according to your recent real max reached (you real max should probably be little more, but …) and then look at what zonesense is “telling” you. After a couple of trainings, (even if Zonesense is still quite unknown
) it might give you its indication of what YOUR zones could be. Up to you to correlate then with your feelings during activity ,etc… and tweak everything (if not doing real effort tests).
Enjoy your next fit journey. -
There may be a bug with the sounds for messages.
When I switch my race s tones/alarm to vibration, I still get a beep for incoming messages.
Or have I just not found the right setting?
-
@DirkM in addition to switching vibration on, also open the tones menu and set it to “all off”
-
@Egika That was my mistake. Thank you. But now I also get a vibration when I use the crown, which as far as I can see can’t be turned off like the sound for the buttons.
I think it would be nice to only have a vibration for the silent notification for incoming messages.
-
@Dimitrios-Kanellopoulos initially when this screen was working properly, it wasn’t useless.
But now it is broken!
Before it was showing the moment, when you stop, so you could see your rest time (in the way I draw). But now it doesn’t (same with new 2.37.48 update).
-
@Brad_Olwin said in SW update 2.37.34 Q3:
@Tami999 Not a bug, these are design changes. I believe that color will be coming to some of the complications, this is the start and will make watch faces faster and easier to develop so they are not tied to firmware updates.
good to know there is still chance to see design improvements and get back the original solar harvest complication icon (as shown on Suunto official pics 
https://www.suunto.com/globalassets/productimages/suunto-vertical/suunto-vertical-titanium-solar-canyon/02_suuntovertical_titaniumsolarcanyon-perspective-c-14-watch-face.jpg?height=900&format=jpg) -
Today i had a bug: when navigating in complications parameters for K14 display, my suunto vertical has restarted alone…
-
@Antoine said in SW update 2.37.34 Q3:
Today i had a bug: when navigating in complications parameters for K14 display, my suunto vertical has restarted alone…
Happened to me too when I was testing new watchfaces twice. I cant remember which one I had during two time crashes, but its highly possible it was this new one K14. Gonna test and edit post.
-
I had a bug with alarms yesterday morning, but there’s no way I’m going to replicate it.
I woke up to the alarm, and mashed buttons to turn it off, but it continued going on for two minutes whilst on the normal watch face. Alarms were at 7:00 & 7:01.
God knows how this is replicable but something was up.
-
Since the last update which was supposed to bring the watchfaces to the store I have tried every single work around that has been suggested: soft and hard reset , deinstall app, since a thousand times, …… nothing helps! I am on iOS with a 9PP and I hate the standard installed faces…. App shows 0/4 faces installed …… Please Suunto take care of this……
-
@JanJ1968 not sure it can help, but… uninstall some sport apps. As for me, I had to sync my watch (race) for like 4 or 5 times, before I got the result
-
P pavel.samokha locked this topic on 16 Dec 2024, 16:24
-
I isazi unpinned this topic on 10 Jan 2025, 13:00