Software Update 2.40.38 (2025 Q1)
-
@Jan-Suchánek said in Software Update 2.40.38 (2025 Q1):
For me, the sleep detection is broke since this update on Race. Was fine before. Now if went to toilet 1hour before alarm, the sleep ends at this time even if i quickly fall asleep again (with airplane mode). Today opposite problem. Went to bed before 10pm and sleep detected from 00:00…
I have this problem too
-
@runomatic
Was the case before this update but now even after reset that doesn’t work at all… -
@Frederick-Rochette said in Software Update 2.40.38 (2025 Q1):
@runomatic
Was the case before this update but now even after reset that doesn’t work at all…I suspect the problem is caused by the app rather than the watch.
https://runomatic.de
SUUNTO VERTICAL Titanium Solar Black (2.40.44)
SUUNTO WING Black
SUUNTO App (iOS) -
@runomatic
Yes but before the watch update that works well. -
@pavel-samokha
I have a Suunto 9 Peak Pro with the new update. Alpine Skiing (Downhill) mode yesterday recorded the activity but average speed, max speed and all information just showed zero during the activity. Prior to the update it has worked fine this winter. I didn´t really do any dubugging on this like restarting the activity once I noticed just let it run through and when pressing the split time button I noticed it gave data. In the end all the data was there. -
@fedequei i revert back to previous firmware without any troubles. Just becareful to remove newer watchfaces because it is not supposed to be installed on older firmwares.
-
battery wise i do observe elevated consumption with the new watch faces btw,
let’s see . 10% per day at the moment
-
for the S9PP, I have to say it works very well after this update !
except for the GPS mode that’s always set as custom (but does not seem to be an issue since it uses he Performence settings I believe), I like the Navigation setting thats keeps the last setting, unlike before.
And the sleep tracker data that don’t match in the app but are fine in the watch.
The new swim face is nicer too.
the battery life is excellent. -
This problem seems to have started with the previous update. Why can’t I turn on only “24/7 wrist HR” without turning off sleep tracking at the same time? Now I am forced to either turn off both at once or turn on both at once which takes more time. Previously, this could be done separately and leave, for example, sleep tracking which still did not bother and did not consume more power. Does anyone have an idea why I am forced to set the time every time I turn on sleep tracking?
-
I realized, that I don’t have clock/time at the top of the display while doing strength activity. Don’t know if it was there before, but should be according to preview in SA. While running or walking, the time is there. Suunto Race.
-
@thanasis I can not confirm this with my Vertical. 2% per day (no 24/7 HR and sleep)
I’m using the new athlete watch faceSuunto Vertical Titanium Solar
OnePlus Nord 4 -
@surfboomerang Same for me : no particular battery drain on both my SRs and SV, also using new watchfaces
-
No battery drain on Vertical. Same battery drain on S9PP (20% per day), the update didn’t help, unfortunately.
-
@surfboomerang said in Software Update 2.40.38 (2025 Q1):
@thanasis I can not confirm this with my Vertical. 2% per day (no 24/7 HR and sleep)
I’m using the new athlete watch faceAnd cannot understand why though . Suddenly the battery is terrible
-
@Ars-Vitae said in Software Update 2.40.38 (2025 Q1):
This problem seems to have started with the previous update. Why can’t I turn on only “24/7 wrist HR” without turning off sleep tracking at the same time? Now I am forced to either turn off both at once or turn on both at once which takes more time. Previously, this could be done separately and leave, for example, sleep tracking which still did not bother and did not consume more power. Does anyone have an idea why I am forced to set the time every time I turn on sleep tracking?
An update:
My problem boils down to the question: can I somehow leave the sleep tracking settings untouched and only manage my 24/7 wrist HR? It was possible and very easy to do before this update. Please tell me that’s a simple bug and will be fixed. -
@pavel-samokha said in Software Update 2.40.38 (2025 Q1):
Improved turn-by-turn notification logic
Today was my first chance to try the new turn-by-turn navigation logic during a trail run and I should say I am quite disappointed. I provided some critique of the previous turn-by-turn implementation - it had some flaws and was confusing, but still functional once you understood how it worked. In contrast, the new “improved” logic is simply not functional.
There are two issues that make it borderline useless:
-
There is a single notification that, as I understand is supposed to come up 20 meters before the turn. That is 62 feet - I saw that number on the watch a few times. But in reality it usually popped up just a few meters before the turn (typically less than 5 meters) and in one case it came up after I had already turned. I wasn’t running that fast - perhaps around 9:30-10 min/mile or about 6 min/km. That is roughly 2.5 meters per second. With that speed, if it came up 20 meters before the turn it would stay up for 8 seconds. But in reality the notification usually disappeared in 1-2 seconds - as soon as I actually reached the turn. Unless I was specifically watching for the notification because I knew where all the turns were, I usually missed it. And let me mention that when running on a technical terrain, especially if it is a downhill, it is not always possible to take the eyes off the trail and look at the watch.
-
Outside of those 1-2 seconds when the turn notification is shown, there is absolutely no indication of where the turns are. Most of the time the watch shows the distance to the end of the route (or I supposed a distance to the next waypoint) at the bottom of the map. This simply won’t do when running in a completely unfamiliar place.
I much preferred the way the way it was implemented previously - the next turn always being shown at the bottom of the map with the remaining distance. I understand that that makes it impossible to also see distance to next waypoint. But that is exactly why next waypoint should have its own dedicated screen with additional details like the waypoint name, the remaining distance, the elevation difference, ETE, etc.
Please change the map to the previous behavior. And then on top of that the notification should come up a bit early so that there are 5-10 seconds to see it. Or perhaps the notification should come up twice - some distance before the turn and then again right at the turn.
-
-
@thanasis said in Software Update 2.40.38 (2025 Q1):
@surfboomerang said in Software Update 2.40.38 (2025 Q1):
@thanasis I can not confirm this with my Vertical. 2% per day (no 24/7 HR and sleep)
I’m using the new athlete watch faceAnd cannot understand why though . Suddenly the battery is terrible
Thanks for your insight. Your battery is currently terrible (like some others, and unlike other others).
If you don’t mind a non defensive comment, maybe still and again, come back with your battery evaluation after a full discharge/charge? (just a peaceful trouble shooting advice)
-
Another night past and today opening the app/widget triggered the storing of the sleep tracking again. I guess I’ll just continue opening the app/widget after waking up in the morning for the time being…
Sidenote: HR tracking during the night always works. -
@sky-runner Also the arrow for the direction should be a little bit larger. I really like the fact, that it’s not longer full screen, but the current style is too small for my eyes. It’s really hard to see. Especially, if it appears a second before you have to turn.
-
@thanasis Try taking it to the Suunto service center to have the battery output checked so you can eliminate any doubts about whether it’s a hardware issue… For me, the daily battery consumption is no more than 2%-3%, (same wathface) but I have all daily features like heart rate monitoring and notifications turned off.
