Software Update 2.48.16 (2025 November Rain release)
-
@Francesco-Pagano I did several soft resets over the weekend to sort a different issue & noticed the same behaviour afterwards, a lag when scrolling up into sportsmodes.
A few times the sports mode “shapes” were presented but with no icon or writing inside, I had to scroll back down & back up before they populated correctly.
No issue today though & scrolling fluidly again.
-
@Mitch9 it is only available for the two new models, R2 and V2
Watch: Suunto Vertical 2 Titanium Black
Blog: isazi's home
-
@Horizontal_2 i have after 3 days 80% thats 6.7% per day.
AOD off
Raise to wake (display only)
Low brightness
24/7 hr tracking + sleep tracking with blood oxygen and hrv
Phone notificationsSo Race 2 will do around 15days which is less as (up to) 18days advertised. But still good battery life. Not doing sport lately so i can’t tell about GPS consumption yet.
Suunto Ambit 2, Suunto 5, Suunto Race 2
-
@isazi said in Software Update 2.48.16 (2025 November Rain release):
@Mitch9 it is only available for the two new models, R2 and V2
I know but I’m interested in the reason.
-
@Mitch9
hardware … or because it is what it is
-
@Tomas5
Thanks. I have about the same.3 days 79%. (started from 99%)
AOD off
Raise to Wake or DND
Low brightness
Same sleeptracking
No notifications
It includes 1 h 50 min of running with map and HR-beltThe weird thing is: before the run (yellow) it’s better than after (green).
Vertical 2
@Tomas5 said in Software Update 2.48.16 (2025 November Rain release):
i have after 3 days 80% thats 6.7% per day.
AOD off
Raise to wake (display only)
Low brightness
24/7 hr tracking + sleep tracking with blood oxygen and hrv
Phone notifications -
@isazi I‘m not sure if we need new features… in the moment, I would be happy to have ‚old‘ basic features back… like low battery consumption or a BT HR Belt wich is working smooth with my SV
-
Hello guys, I told you some days ago that I noticed that the Suunto HR belt is not working smooth since the last firmware update of my SV… the connection gets lost every minute… and after some minutes, an acoustic signal tells that the connection is back… before my training today, I disconnected the belt and reconnected it… but nothing changed. The belt was bought 10/24 and I renewed the battery about one month ago… after one year of usage. The problem started directly after the last firmware update… what should I do? @Dimitrios-Kanellopoulos @pavel.samokha would it be helpful to send logs? Is it the watch or the belt? The belt should be under warranty, I think?
-
Maybe it could be mentioned to suunto from people here that have the ability to talk them instead of worrying about new updates to fix the battery drain problem that many of us are having?
Personally I wish they would allow me to “update”
Back to whatever firmware came with my suunto vertical over 2 years ago when I bought it was it worked perfect back then. -
@gone-troppo yes, it would be great if you could hook them up to a USB Port via Suuntolink (like you could do with the S5 and S9 series) and then have the option to choose & install any former and actual firmware
-
Last Tuesday morning I’ve updated my 9PP to this firmware: during the evening, reached a battery level between 10-20%, I fully recharged the watch.
Today (now), after almost 7 days, the battery level is 64%.
From firmware 2.40.44, the last one stable and used on my watch, to 2.48.16 I’ve not changed anything in my routine and device use: actually, with 2.40.44, a 100% battery lasted more or less 8-10 days.
I will continue monitoring the battery discharge, to 10-20% and for the next battery cycles, but, at the moment, firmware 2.48.16 (for me) it’s doing its work.
Suunto 9 Peak Pro Titanium Slate
Suunto Spartan Sport#swatt
-
@Horizontal_2 said in Software Update 2.48.16 (2025 November Rain release):
The weird thing is: before the run (yellow) it’s better than after (green).
I think that’s normal, not weird. Activities consume more energy than the watch state.
If you mean the steepness of the curve, when I look at it and extend the green line, it starts at the same point as the yellow line, at 100%. This implies that the trend also includes activity consumption. If this were correct, the green line should reach 100% in -days. -
A week after having updated and a then recharged from about 50% to 100%, I have now ≤ 5% per day on my Race, with the following settings and no acticities:
AOD off
Raise to wake (display only)
Medium brightness
24/7 HR tracking + sleep tracking and HRV (without blood oxygen)
Notifications -
@segi_pn The moment the line leaves the yellow line and jumps the green line is the acitivity. The rest is without activity. Doing one activity shouldn’t interfere with the rest of the battery performances. That would be incorrect. It should have a steepness of 5%/day
In a few days I’ll give an update
-
How can we have the Ground contact time and vertical oscillation ?
I did several run activities since the update but nothing is shown in the move report…A3S | S9B | S9P | S9PP | SV1 Ti | SV2 Ti
Suunto Wing
Suunto App: Android Beta -
@v.sacre It’s automatic for running activities (running,trail I have not tested others) and with custom sport mode based on these activities
You also have new data fields related to these metrics that I did not use as I only look to my GCT after my workouts in the app -
@cheetah694 how’s that possible? I’m on Vertical 1 and I do not have such info. It was the first (and quality) I have had checked before. I have to go to sleep widget now
-
@thailon I think it’s only available on Run 2 and Vertical 2 without attaching external devices (e.g Stryd)
-
I am on Vertical 2. And It tried yesterday without Stryd, but still it don’t show those metrics.
-
@v.sacre did you check the detailed stats in your app? Under technique I see Avg. ground contact time and Avg. vertical oscillation.
