Suunto 7 Altitude Issues
-
@aleksander-h
looks better, indeed
-
@mff73 thinking about it. 10 m increase in altitude is more or less equal to the offsett I see on my SSU (I often get roughly 10 more ascent then descent despite starting and stopping at the same place). So it seems fixed!
Now all I have to do is spend the rest of the day tapping the update screenā¦
-
Well. After the update I did a 15 min short lunch walk to get out of the house/office. Iām happy to say the elevation graph looked beautiful! No wonky lines, ascent where I expect it to be, descent where I expect it to be!
Thanks for all the help forum posters!
-
@aleksander-h If the exercises have the exact same time the app may filter one out. Just make sure you start one 20-30sec before or after they other, then they will sync fine. I have had this happen as well.
-
@brad_olwin said in Suunto 7 Altitude Issues:
@aleksander-h If the exercises have the exact same time the app may filter one out. Just make sure you start one 20-30sec before or after they other, then they will sync fine. I have had this happen as well.
I started them both at exactly the same time, and ended both at exactly the same time. So it is definitely no surprise if the Suunto App thought ānope, donāt need that oneā.
Thanks for the tip. Hopefully though, my SSU can go back to being a reserve watch now
-
@aleksander-h said in Suunto 7 Altitude Issues:
Well. After the update I did a 15 min short lunch walk to get out of the house/office. Iām happy to say the elevation graph looked beautiful! No wonky lines, ascent where I expect it to be, descent where I expect it to be!
Thanks for all the help forum posters!
Welcome (on behalf of other helpers also
) You are now officially knowledge repository of ascent/altitude issues and official next helper 
-
@mff73 I look forward to telling people they need to stick a soft toothbrush carefully into the baro hole
.Iāve picked up a few cool tricks along the way. Extracting the zip file from the android app and uploading the samples.json file to qs gave me all sorts of cool stats I didnāt know I could view!
-
@aleksander-h
Suunto takes care that we grow with our challenges
-
@brad_olwin is this new?
so far I have often recorded activities with both S7 and S9 and always have had duplicates in the app.
Now on Sunday it was the first time that I ended up with only 1 activity in SA after syncing the two watches. -
Hi all,
I have the same issue with altimeter measurement jumping high and low of about 12 meters. I tested the watch with Altimeter wear os app and the readings confirm the continuous wrong measurement.
Moreover I noticed that gently squeezing the bezel or the back of the watch I systematically can change the altitude up and down.
I think that there is a hardware problemā¦
Someone can confirm? -
@egika No, but to be honest it seems random. I am now making sure my activities start or end 20s apart.
-
@cesareluca contact support
-
@cesareluca
With same problem, do you eventually try the solution a few post above ? Cleaning sensor is very first thing to do to be really sure. -
Solved with a very soft small brushā¦ thanks!
-
Iām slowly giving up. My S7 was at the service and the sensor is OK according to Suunto. I sent my runs to support for evaluation. No reaction for 2 months. On Thursday the run was good with only 15m deviation. Yesterday on the first flat 500m I had 53m ascent and on a lap with a 200m ascent it was 288m ascent on the S7. Iām curious whether the support will still answer.
-
@kurt68 I assume youāve also tried cleaning the baro hole with a soft toothbrush?
-
@aleksander-h yes but iām trying again
-
@kurt68 Are you sure that clothing or skin is not obscuring the sensor hole for the barometer. If the hole is obscured or if air is pushed into the hole you will get spikes in the altitude reading and resultant errors. If you wear the watch very tight it is possible for your skin to block the hole, the sensor will see that as a change in pressure.
-
@brad_olwin Iāve tried a lot and made sure not to cover the hole. I started a run. when standing I had between 20 and 50m ascent. After 5 minutes I finished the run and started a new one. On the first flat 500m again 20m ascent. On the rest of the run there were another 50m ascent that were not recorded by the S9 and the Coros Vertix. The wind wasnāt very strong either, that shouldnāt be a problem. I donāt know what else to try.
-
@kurt68
my wife saw this behaviour on her watch once when she selected an activity and started it immediately. since then she waits until the satellites are locked and I assume that helpedā¦ not sure at all if this would help in your case?!