Suunto Vertical: Bug Collection

[Sergei Ladeishchikov]

Power saving turns on at 2% (although the manual says 10%)

[dulko79]

@surfboomerang It is clear vibration stops working below certain battery %. The thing is that alarm goes off at some random time (just message shown, no sound) after the planned time for alarm.

[plopes73]

@surfboomerang I know that charging will solve, usually I don’t let the battery sonlow, but was just confirming to be aware of this in any future situation, and, if this it’s the normal behaviour. Didn’t sae that on the manual, will search better. Imo 10% it’s a lot to stop vibration even for notifications, 10% it’s almost 3 days on VERTICAL
Thanks

[Frank Stefan]

Got a new SV on saturday. While first loading the watch (got it with 53%) the watch has powered off at 99%.

Also the notifications seem to be a little bit faulty.
I have a few notifications, that i could not delete on the watch. The watch says to put the watch in better range to the phone. 50cm should be no problem as a “distance” i think.
I also had it a few times, that the complete notification widget was stopped working because it was “too busy” haha.

Suunto, this Firmware has a lot of bugs that need to be fixed asap.

[seanvk]

@Frank-Stefan said in Suunto Vertical: Bug Collection:

I have a few notifications, that i could not delete on the watch. The watch says to put the watch in better range to the phone. 50cm should be no problem as a “distance” i think.

My issue is that there are these orphaned notifications on the watch that no longer exist on the phone. I cannot delete these notifications either.

[Frank Stefan]

@seanvk Maybe a restart of the watch may help. I have given up on this watch and have sent it back. Purchased a garmin instead. I will follow this forum from time to time and hope the bugs will be fixed. For me… i have purchased a full product that should run fine from the beginning. But the SV does not. Really bad.

[zhang965]

@Frank-Stefan said in Suunto Vertical: Bug Collection:

seanvk Maybe a restart of the watch may help. I have given up on this watch and have sent it back. Purchased a garmin instead. I will follow this forum from time to time and hope the bugs will be fixed. For me… i have purchased a full product that should run fine from the beginning. But the SV does not. Really bad.

My sv’s touch screen doesn’t work today.

Lol my next watch will be a garmin

[isazi]

@seanvk there are a couple of notifications that may still get stuck, for me it is the default Android phone app for example. A final fix to this old issue is coming with the next firmware release, and it works great.

[altcmd]

@isazi Seeing is believing.

[zhang965]

@altcmd said in Suunto Vertical: Bug Collection:

isazi Seeing is believing.

What do you mean? There is a lie in believe

[6294946]

Not sure if this is a bug but since its not explained in suunto manual:

Sometimes I can activate backlight by tapping the screen and sometimes not. Other times I need to press the middle button to be able to use touch screen gestures and swipes. What is the expected behaviour? Can I change this in some menu?

[A Former User]

@6294946 That’s the automatic screen lock. You can’t change it.

“When you are not recording an exercise, the screen locks and dims after one minute of inactivity. To activate the screen, press any button.”

https://www.suunto.com/en-ie/Support/Product-support/suunto_vertical/suunto_vertical/settings/button-and-screen-lock/

[plisken]

Found out that despite the manual suggesting that Low Power Mode would be activated automatically at 10% battery, this did not happen. I have also read that it activates at 1% but can also confirm that this is also not the case. Watch drained completely today, no Power Saving Mode activation, no warning, just dead.

2.25.66

[Łukasz Szmigiel]

@plisken keep in mind that:

• Two S+ apps will drain battery more than one, and you won’t see it in pre-workout estimation.
• Navigation screen switches the watch to the best GPS mode available.
• I have no means of testing it in SV as I don’t own one, but using ETA/ETE fields may also switch the watch to the best battery mode (this needs confirmation).

And there may also be some more quirks.

[plisken]

@Łukasz-Szmigiel The power drain is not an issue for me, it is the fact that it does not automatically enter power saving mode as per the manual, which is not ideal.

[mikekoski490]

For some reason Vertical just stopped providing HR readings today at 6am for pretty much the whole day based on the SA graph. Confirmed that 24/7 hr recording is on. Toggled it off/on and still no reading. Powered off and on and now getting HR again.

[GiPFELKiND]

@mikekoski490 so do you know the Problem?!

[mikekoski490]

@GiPFELKiND No. In 4 months it’s never happened. Fixed with a reset.

[Mitch9]

@mikekoski490 said in Suunto Vertical: Bug Collection:

@GiPFELKiND No. In 4 months it’s never happened. Fixed with a reset.

I had the same problem some days ago. Soft reset fixed the hr reading.

[jjpaz]

@mikekoski490 I had the same problem several weeks ago. Also the “no map” issue was there at the same time, black map screen. After a soft reset all started to work again.
Perhaps both issues were related, some memory buffer getting empty or something like that.