Software release 2.30.26

Stefan Kersting

AnonVerticalOwner

Aside from sleep tracking having lost its value for the moment, all the other features I rely on have greatly improved. Good stuff! I look forward to the hotfixes that’ll hopefully make this update perfect.

Tami999

I must say for me HR works perfect now. I always felt its like 20 too high during exercises, but after update its looks very good.

maxthetravelor

am i going insane???
why can I not zap through my widgets??? no i can only pin one widget and need to go downwards to select one ??? I dont like this change. Can I have the old way?

BrunoH

@maxthetravelor said in Software release 2.30.26:

Can I have the old way?

Sorry no. This is the way.

You can pin one widget to the upper button (long press) and one to the middle one. The rest of the widgets are down there. It took me a while to get used to it, but once I sorted the widgets and disabled some I am pretty happy with the results.

jjpaz

Today another “little” issue, second time it happens in my SV: touchscreen stopped working (out of activity) and backlitght didn’t power off.
Soft reset “solved” the problem.

The good thing is that now I have the recovery metrics synced with App

Todd Danielczyk

Not sure if this was a bug or just a fluke but let the watch run down completely (charge icon) since the update. Put it on the charger and left it to do its thing.

Went to check on the level of charge and it black screened on me. Had to do the top button hold for 12 seconds to bring it back to life and the battery showed it was at 90%. Not sure if it went into deep sleep mode being off my wrist but haven’t seen that happen before since I’ve owned it. Then again it’s never been fully depleted either.

Just wanted to ask if anyone else had experienced that behavior. Sent the logs to Suunto just in case.

stromdiddily

@BrunoH said in Software release 2.30.26:

@maxthetravelor said in Software release 2.30.26:

Can I have the old way?

Sorry no. This is the way.

You can pin one widget to the upper button (long press) and one to the middle one. The rest of the widgets are down there. It took me a while to get used to it, but once I sorted the widgets and disabled some I am pretty happy with the results.

Disabling and sorting is the way!

stromdiddily

@Stefan-Kersting said in Software release 2.30.26:

@stromdiddily dropped how much?

3.5 points for me which puts me in line with Runalyze estimate and where I think I’d land on the various VO2 max pace charts. Really happy with it

DrSilverthorn

@Todd-Danielczyk My screen turns off after being on the charger for some period of time. I just need to move it a little, and it comes back on. Not sure if this was what you saw. The behavior is consistent, so is probably a feature.

Michaël POINTEAU

@Jonathan-C thank you for your answer but I am not understanding what you mean? Are you speaking about auto/manual lap table accessible on the watch within the activity logs or in the app? On the watch nothing.

“they are now organized behind the overview screen instead of separate pages. So you will have to go to the section with “automatic laps” or “manual laps” and click the middle button to get to the tables”

duffman19

@Michaël-POINTEAU said in Software release 2.30.26:

On the watch nothing

In the activity stats menu (after saving or viewing in the Logbook), scroll to the listing “Laps.” You should see the number of laps recorded (if there were any) and a right arrow icon next to the middle button. Pressing the middle button will bring up the lap table you are looking for.

Previously, this was possible while viewing any statistic, but now you must be on the “Lap” stat to see it. Pressing the middle button while viewing any other stat will exit the menu.

Todd Danielczyk

@DrSilverthorn yes I’m familiar with the going dark and needing to shake to wake up.

This time, while on the charger, it wouldn’t wake up, clicking the Vertical’s buttons didn’t wake it up and I had to soft reset it by holding the top button over 12 seconds (like when your get it fresh out the box to wake it up). Once it woke up the watch showed it was charged 90%. Never saw that happen before and not sure what caused it.

As I said the watch was completely drained and wanted to charge it up to 100% to recalibrate the battery

greku

Today my SV hang . Totally freeze. I cannot do anything except 12s upper button reboot.
I do software update as soon its came out (6day ago - 2.30.26) . I do not have any GPS activities, only 3 short trainings.
SV hang without any clicking etc . Just realised it is so much later that watch shows me. (almost 1,5h behind ;o )

inkognito

One strange thing: I recorded a bowling exercise. Battery estimates:
Custom battery mode (touch enabled, display timeout OFF): 193h
Custom battery mode (touch enabled, display timeout ON): 185h
Performance: 193h

One would expect that display timeout saves some battery, right?

Dimitrios Kanellopoulos

@inkognito reporting

Dimitrios Kanellopoulos

@inkognito wait is the estimates coming from the watch ?

inkognito

@Dimitrios-Kanellopoulos Yes, indeed. I’m talking about the watch estimate, on the top of the screen while choosing the battery mode:

Maryn

Aside from the one-day delay in CTL, TSB, TSS in the watch vs. app, the new sleep algorithm works not very well for me. Every day in the summary in the app I have the information that the waking time during sleep is more than an hour. I suspect that I am not the only case.
The previous sleep measurement worked well in my case.

I feel good, I sleep well.
Resting HR I have entered 55 bpm so quite high considering that resting HR after waking up is in the range of 40-44 bpm.
Now with the new algorithm, should I switch my resting heart rate?

To this, you should also add the fact that for several activities I have a black screen instead of a map
Maps can be very easily excluded from use. Just set the range to 2km and scroll through the map screen a few times. After a while, we have a dark screen.

After the new update, the watch lost almost 50% in three days - acturat this so far I’m not worried because I hope it’s related to battery calibration.

I don’t remember such a buggy update since the Ambit, in this particular case there are big oversights that affect key functions.

I eagerly await the update.

Sergei Ladeishchikov

Hi all! My watch was discharged to 12% and vibration on notifications stopped working again, just like in the previous software. Has anyone noticed the lack of vibration?