Software update 2.39.20 (2024 Q4)
-
FYI in case anyone was wondering, the behaviour of DND within an activity hasn’t changed with the new firmware (I was hopeful…). If you set DND in the activity setup screen it turns off all notifications plus then doesn’t re-enable notifications at the end of the activity. Fingers crossed for the Q1 2025 firmware
-
@joachimstolpe said in Software update 2.39.20 (2024 Q4):.
Self explanatory is that it worked before, otherwise I wouldn’t have been able to update - and that’s what kinda drives me mad. Why won’t it work now?
I’m at a loss here guys. What to do?
Just to make sure: wifi is not used for firmware updates. They are transferred via BT…
Otherwise no idea. Mine is working well on various models. Flight mode etc is off? Can you add the wifi in the settings at all?
-
I have just successfully downloaded a map, no issues. Although one thing I have noticed was that the watch wasn’t charging when I plugged it in, thought that was odd. Tried it at a few different power points, none of them worked. Then after a couple of soft resets it decided it would start charging. Anyone came across this before?
SV Titanium Solar Forest
-
Same for me. OHR didn’t work yesterday after the update, then after soft reset, it worked. Today again same issue.
It says “measuring” but green OHR lights is not showing.
-
On my Race, sleep tracking only worked the first night after the update. Now 2 nights not. A reset has not helped.
-
Nope, this time the control panel didn’t get fixed by waiting. After the night it still looks like this. Notice that the bottom row (the one with the smallest font) is in focus and gets selected with the middle button.
Quite a lot of regression bugs with this sw.
-
@BrunoH Bad luck
Control panel displays correctly again on my watch, but I am pretty sure it will be broken if I restart the watch.
I hope Suunto is aware and working on this display bug.
I use bottom button shortcut to access the control panel, maybe it is related?
@BrunoH How do you access control panel on your watch -
@sebchastang The same for me; I have the lower button configured as shortcut. I need to adjust the morning wakeup alarm a few times a week so I really appreciate the shortcut.
I too hope for a correction, but unfortunately I have seen very few comments about this problem in the forum. I guess a cosmetic flaw doesn’t get as much attention as the OHR problem.
Compasses: M-311, A-10, SK-7
Diving: Finnlight Navy 90, Vyper
Sports: Metron, S7, S9B and Vertical -
@atoponce said in Software update 2.39.20 (2024 Q4):
@Romain-Sassareu Unfortunately, when this has happened in the past, it lasted like 5-6 hours.
Actually, I’ve successfully uploaded an activity on SA more that 12[h] ago, but no sign of that activity on Strava yet.
-
@Egika Oh yeah right, sorry. WiFi is for maps.
Anyhow, I’ve had no issues with downloading maps on the same WiFi before.Yep, flight mode is off. And no power saving mode either. Discovery is on.
I can’t add the WiFi in the settings at all. I find the network, enter the password which I make sure is correct, it tries to connect and after some spinning it tells me that it can’t connect to the network and that a “reboot of the router might solve it”. Of course I’ve tried that and that unfortunately doesn’t work either.I really don’t know how to solve this…
-
One problem with the new carousel/zoom animation is that the already small fonts get even smaller for the non-active rows making people with less than perfect eyesight struggle. I much prefer the old way given the limited screen sizes of these watches.
-
Same issues here with HR on 9PP, since latest update, HR stops every few hours and have to perform soft reset.
No sleep tracking as usually stops tracking HR overnight also. -
@sracer I agree with you
-
Same issue here. No heart beat measuremenrt and no sleep tracking.
Restart makes it works for a few hours but then it stop again.
9 peak pro with last update 2.39.20 -
@joachimstolpe said in Software update 2.39.20 (2024 Q4):
@Egika Oh yeah right, sorry. WiFi is for maps.
Anyhow, I’ve had no issues with downloading maps on the same WiFi before.Yep, flight mode is off. And no power saving mode either. Discovery is on.
I can’t add the WiFi in the settings at all. I find the network, enter the password which I make sure is correct, it tries to connect and after some spinning it tells me that it can’t connect to the network and that a “reboot of the router might solve it”. Of course I’ve tried that and that unfortunately doesn’t work either.I really don’t know how to solve this…
any change in your Wifi settings ? Password changed with some comas or specific caracters ? https://forum.suunto.com/topic/9157/wifi-with-password-comma?_=1734593834227
firewall ?
changed to 5GHz ?no expert myself, just enumerating few issues seen in this forum ?
Did you eventually try to connect to a phone wifi hotspot to check if it is working ?
-
The network name is L & J and I’ve also tried changing it to L J with no success. Password is regular letters and numbers so nothing fancy there.
Firewall is set to “low “ mode.Also using 2,4 GHz. The 5 GHz one doesn’t even show when i scan for networks in SA.
Tried using my phone as a hotspot, same issue.
-
This Update seems to lead to HR Sensor Malfunctions again on the PP9. Read more here: https://forum.suunto.com/post/158962
Think HR might fail when Ox Sensor kicks in during the night.
Could not reproduce is while starting Ox measurement manually.
Didn’t have this issue for quite a long time now.Anyway, update worked smooth here and I am happy with the new features.
-
@BrunoH I’ll add myself as another person who had the Control Panel display issue right after the update. It was fixed with two soft resets and hasn’t reappeared. But I too use the bottom button as a Control Panel shortcut. Sounds like a pattern for this issue.
-
Excuse me, but WTF happened here?
-
Irony on…
I’m not a doctor, but you should see a cardiologist. Urgently! 🫣
Irony off…
https://www.instagram.com/moves.are.life/
Suunto Vertical Black Lime
Suunto 9 Peak Pro Black
Suunto Spartan Ultra Stealth Titanium
