Update 2.39.34
-
@Łukasz-Szmigiel Same observation here, I am with version 2.39.34 but was the same with 2.39.20, I have noticed also an excessive consumption since the update and the current autonomy is far from that announced when I bought this watch and that I had with the previous software.
Now, one week autonomy with 4 hours of use in activity recording and without active GPS. -
@fondueaufromage this is super poor, from 40 to 20 hours.
-
@Łukasz-Szmigiel The poor and the least explainable is to go from a battery life of 21 days (according to Suunto technical data) to 7 days after only 4 hours of recording (and GPS inactive).
-
@Łukasz-Szmigiel How do you get such a great overview of battery consumption?
-
@Kaiphi you can push samples.json (sml file) from Suunto App cache into my crude app:
-
#metoo here I have to charge it at least every 6-7 days even with just about 4-5 hours GPS enabled for walking while currently having to fix my back pain and just can do some physio and walking at the moment.
I checked it yesterday evening and it dropped from 34% to 20% in about 17 hours, with no activity tracking. Light are turned of, OHR is in 24/7.
I have been updated to 2.39.34 even while updates where turned of.
Still can remember times when I did almost forget where I put my charger
Would be great if next releases would be just hard ass bugfixing releases.
-
@Ecki-D I have updated today to 2.39.34 (which is a downgrade) and it seems to have fixed the battery drain - at last, for one workout I’ve tracked.
-
@Łukasz-Szmigiel okay - I have to check with your app. Maybe it is just a feeling that it needs to be charged more often.
-
I’m seeing the same pattern here too, my watch definitly needs to be charged more often than when I got it 2 years ago, I didn’t bother to make acutal measures, but the battery life is roughly half of what I experienced before.
I agree with this statement
@Ecki-D said in Update 2.39.34:
Would be great if next releases would be just hard ass bugfixing releases.
9 Peak Pro is a great watch “as it is right now” if yould just fix the ever increasing amount of bugs and just be done with it, that would be great
-
@Elipsus said in Update 2.39.34:
fix the ever increasing amount of bugs
Agreed. And certain, minuscule UI gimmicks. But it’s bugs - mostly.
I also doubt that the hardware of this watch will allow for much more.
-
Hello everyone!
Just found a little bug today: it seems that outdoor watch face isn’t compatible with alarms and they don’t work properly while using this screen. I found my alarm active but no ringtone/vibration was active!
(I suppose this as I changed watch face and with the other one everything was fine). -
@misu763 that sounds annoying, my alarms do work as expected with the outdoor watch face. I have compass as the outer complication. On Vertical.
-
@Audaxjoe
S9PP here and I set the outdoor watch face with daylight bar, date(day/number) and moon phase… not a big problem, now I know I have to change it if I need to use the alarm! I hope it helps developers! -
@misu763 I have the alarm time and seconds as the other complications on mine.
It is the only watch face where the seconds seems to stay active - ie normally you loose the seconds count down when the watch isn’t viewed for a while. I don’t seem to see any difference in battery drain.
I
-
I have issues with HRV measurements. It started with the faulty update in 2024. I downgraded the firmware, but it didn’t really help. I was hoping the issue would be fixed with the newest update, but it wasn’t.
The current firmware version: 2.40.38
After the firmware update, I reset the watch to factory settings, but this didn’t help either.
Any suggestions?
-
I dont know is it somehow related but i had serious issues with my 9 peak pro with HR bug which didnt measured about 40% of usage time. Sleep tracking was imposible to create analytics. I wore my watch on my left hand (fully tattoed up). 2 days ago I put it on my right hand with no tattoes and HR didnt even stopped once. I didnt change anything, no update, no reset, nothing, just switched hand
-
I dont know is it somehow related but i had serious issues with my 9 peak pro with HR bug which didnt measured about 40% of usage time. Sleep tracking was imposible to create analytics. I wore my watch on my left hand (fully tattoed up). 2 days ago I put it on my right hand with no tattoes and HR didnt even stopped once. I didnt change anything, no update, no reset, nothing, just switched hand
-
I dont know is it somehow related but i had serious issues with my 9 peak pro with HR bug which didnt measured about 40% of usage time. Sleep tracking was imposible to create analytics. I wore my watch on my left hand (fully tattoed up). 2 days ago I put it on my right hand with no tattoes and HR didnt even stopped once. I didnt change anything, no update, no reset, nothing, just switched hand
-
P pavel.samokha unpinned this topic on
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login