Software Update 2.40.38 (2025 Q1)

duffman19

@enriqueescoms Thanks for the maths . I’ve done two running activities with the new TbT and the reality is the notifications are nearly worthless even at slow trail running speeds. The 20m distance is dependent on the accuracy of the watch’s GNSS (which is still crazy good) and the accuracy of the route. The watch could be 5-10m off at times (rarer these days) and routes and trail maps can be even farther off in places. In such scenarios, that baked-in 20m threshold is useless.

@Stefano-M64 said in Software Update 2.40.38 (2025 Q1):

a “perfect” implementation would require to compute the average speed in order to show the notification with a given time interval (e.g. 10s) before the turn, instead of a given distance (e.g. 20m)

This is the way.

Dj_afrolexios

Hello,
After Update to 2.40.38 I can’t enable Wi-Fi on my Race S, both from phone or watch, so I can’t download offline maps.
Is there anyone who has the same problem?

Tieutieu

After analyse of my lunch ride, the « small elevation peaks » that I’ve been experimenting since few weeks, due to wind probably, are still there. (I didn’t had such things the past months).

Here are 3 sections where it was either pure uphill or downhill.

Capture d’écran 2025-03-25 à 14.55.25.png

The_77

A note on readability - the timer displayed (if it is running) when activating the screen is definitely smaller than it used to be. I can’t recall if it had the little white vertical line next to it before, but it’s now more in line with the barometric pressure font size, albeit harder to read. I’d also suggest that it has shifted a few too many pixels up in this version of the K14 watch face, it’s notably a jump up a few pixels from the usual complication there, or at least appears that way due to the small timer signal above it.

PXL_20250325_140608047.MP.jpg

misu763

S9PP upadetd here!
The power saving mode seems to be improved…I guess that now it works better and my 9PP lifelong will be longer!
Carousel menu is back and I love it! Let’s see how many features have been improved!
Thank you!

enriqueescoms

@Bogdan1921 For sure

enriqueescoms

@Stefano-M64 Totally agree

Martin Navrátil

@duffman19 said in Software Update 2.40.38 (2025 Q1):

@Stefano-M64 said in Software Update 2.40.38 (2025 Q1):

a “perfect” implementation would require to compute the average speed in order to show the notification with a given time interval (e.g. 10s) before the turn, instead of a given distance (e.g. 20m)

This is the way.

But what about activities that have fast changing speed like mountain biking? Idea is nice but the mixture of both distance and time of display would be the best.

maszop

It’s just that different activities require slightly different settings.

What good is it that Suunto has about 100 types of activities if the vast majority are not configured correctly and there is no option to change it.
Apart from such navigation messages, this also applies to autopause, total ascent gain smoothness, default button functions, etc.

I installed it, without testing yet, it works very fast on SV

I use my custom activity modes, all previously used settings are remembered.

Stefano M64

@Martin-Navrátil said in Software Update 2.40.38 (2025 Q1):

@duffman19 said in Software Update 2.40.38 (2025 Q1):

@Stefano-M64 said in Software Update 2.40.38 (2025 Q1):

a “perfect” implementation would require to compute the average speed in order to show the notification with a given time interval (e.g. 10s) before the turn, instead of a given distance (e.g. 20m)

This is the way.

But what about activities that have fast changing speed like mountain biking?

sorry, I meant the average speed computed before the turn, this can be with a moving average of a given time width (e.g. 1 minute). To make things easier, the resulting distance could be binned, that is, when the average speed is lower than S0, then distance = 20m, when between S0 and S1 than d = 30m, and so on up to 100m, for axample…

Mattg576

Just checked again & it’s now calibrated so it got there in the end, ignore my last @pavel-samokha.

Jordi C

Where do you get these battery and GNSS statistics from?

gerasimos

UI speed it’s incredible and Very smooth. Great job
*and the Pause in nav menu

Tomas Fejfar

@duffman19

Tried on bike - 20 m is dangerous, I would recommend 100 - 200 m
Tried during run - 20 m is late, I would recommend 40-50 m

Jordi C

How about an option that allows the user to choose the turn warning distance per activity?

babychai

Battery Mode in activity always go back to Custom even though already selected Performance. Bug?

Bogdan1921

@Bogdan1921 said in Software Update 2.40.38 (2025 Q1):

I have made a 5km mountain biking with autopause on. Several times when I’ve start to move the screen was in autopause menu so the activity didn’t start. I have made a calibration before to start the activity.

Today I had the same issue.

Here is a video:

https://vimeo.com/1069280140/12407b1f87

A Former User

@babychai Do you use a custom sport mode? If yes, then that’s normal behavior. If you want to stick to performance mode, use the stock activity instead or adjust your custom mode for best GPS accuracy.

cosme.costa

@Stefano-M64 He works for Suunto!!

surfboomerang

@babychai No, this was always the case. Once Custom is set to the same settings as Performance, the watch will default to Performance again