Software Update 2.44.46 (2025 Q3)
-
@Tieutieu is this not conflating two different systems? The automatic run type assignment is based off the personal zones set for HR, Pace & Power, whilst TSS is based off whichever of those you choose (+ZS) to generate a TSS number.
For the record I redid my zones after the reset and had a long aerobic run counted properly and an anaerobic run counted properly too.
Suunto Spartan Trainer Wrist HR / 9PP Refurb
-
@Alonzo said in Software Update 2.44.46 (2025 Q3):
Hi everybody, I have an issue with ZoneSense: it stopped working on Race S after an update to 2.44. Perhaps something should be tweaked, but I don’t get where and what.
Have you confirmed that your external HRM is actually used during your activity?
Some users have reported that they need to manually activate sensors when starting an activity if they have multiple sensor of the same type paired.
-
@Mads-Hintz-Madsen yes, HR data comes from repaired chest strap. Wrist OHR sensor is turned off actually.
-
@The_77 not sure to understand what you mean. I have set my hr zones to « hr zones the same for all activities ».
So my Z1 run should be long aerobic -
@pavel.samokha
This update corrects the Turkish translation errors in the play menu that I mentioned earlier.
There’s also a weather unit option for wind speeds in meters per hour, kilometers per hour, or knots. In Türkiye, we use kilometers per hour.
-
@Tieutieu I meant setting pace & power zones too
-
@The_77 ok got it. I only use HR zones, set the same for all sports.
-
@Tieutieu yeah me too, but this doesn’t mean suunto ignores them.
-
@Likarnik yep I’ll check my power zones then.
-
@Tieutieu we should have options to ignore this, as a trail runner you probably don’t know power and pace zones. As I read this is set by 10k/threshold and if you do that, you are always in Z1 on trails
-
@Likarnik I checked and « special zones for running » was pinned ON on both my SV and SRs. I un-pinned it, maybe it was the reason power zones were used to tagg my exercise (and indeed they are not set properly)
I’m sure it was unpinned before update. => for me that’s the option that exclude power zones from calculation of intensity
@The_77 thank you. Well I recommend to all of you to check if after update you are not in my case, with this option pinned ON.I just asked 5 friends to check also.
[edit : my friend are all in the same situation => special zones for running was ON after update. Cycling remains to OFF. So definitively a « bug » after update, that will cause most off users to have wrong auto-tags. @Egika @isazi did I missed something elsewhere ? If not maybe you could report to Suunto ?]
Suunto’s devices at home :
Vertical titanium solar
Suunto Race S
S9pp titanium sand
Suunto Wing
S9B titanium Ambassador edition, A3P, X6 -
@Mads-Hintz-Madsen the same issue with polar H10. and I have not paired second power meter… so I ended with ghost sensor in menu. luckily I’m able to re-pair after soft reset. hint is to swipe back from pairing screen and do not wait to see result of pairing, because then sensor is not connected in sport mode again.
the worst part is, that HR belt is randomly not connecting to sport mode even it worked in previous session few hours ago the same day. I don’t want to imagine myself standing on start line and my HR belt is simply not connected.
and because suunto took time to implement multisensor support (just few years) I bought hammerhead computer for my road cycling. now I wait third year to finish integration between suunto and hammerhead, so at least I can see correct HR zones…
-
Im really lost about these metrics now.
- what TSS should be selected for running ? As per training peaks it should be tss
but on this forum everyone goes for tss(HR) ? - what about trail running then ?
- how do you set the power zones ? Is it any useful ?
All my friends having other watch brands do not enter these data manually, everything is calculated by the software itself. So why on earth do Suunto users have to do it without any knowledge on them ?
- what TSS should be selected for running ? As per training peaks it should be tss
-
No longer works with Stryd or FC COROS, even though they are connected. If, for example, you accidentally disable STRYD (or FC Coros) during an activity where it was working normally, it is then impossible to reactivate it (ever again, as there is no check box). Not to mention the foam battery now on my Vertical. So I’ve reverted to the previous update while waiting for the issue to be fixed.
-
Hey guys, couple of issues I’ve noticed since the upgrade (but first, great updates, lots of key improvements
)- Been one crash/reboot after trying to start an activity (default walking activity)
- One freeze trying to start a custom running activity so fell back to the default running activity
- HR chest belt doesn’t connect while starting an activity (though the sensor pairs) so I used my arm strap instead (I’ve got two HR sensors paired now). Tried forgetting the sensor and repairing but didn’t work.
-
@Tieutieu said in Software Update 2.44.46 (2025 Q3):
@Likarnik I checked and « special zones for running » was pinned ON on both my SV and SRs. I un-pinned it, maybe it was the reason power zones were used to tagg my exercise (and indeed they are not set properly)
I’m sure it was unpinned before update. => for me that’s the option that exclude power zones from calculation of intensity
@The_77 thank you. Well I recommend to all of you to check if after update you are not in my case, with this option pinned ON.I just asked 5 friends to check also.
[edit : my friend are all in the same situation => special zones for running was ON after update. Cycling remains to OFF. So definitively a « bug » after update, that will cause most off users to have wrong auto-tags. @Egika @isazi did I missed something elsewhere ? If not maybe you could report to Suunto ?]
Thanks for saying this. Was the same for me.
-
@JonasLarsson said in Software Update 2.44.46 (2025 Q3):
@Tieutieu said in Software Update 2.44.46 (2025 Q3):
@Likarnik I checked and « special zones for running » was pinned ON on both my SV and SRs. I un-pinned it, maybe it was the reason power zones were used to tagg my exercise (and indeed they are not set properly)
I’m sure it was unpinned before update. => for me that’s the option that exclude power zones from calculation of intensity
@The_77 thank you. Well I recommend to all of you to check if after update you are not in my case, with this option pinned ON.I just asked 5 friends to check also.
[edit : my friend are all in the same situation => special zones for running was ON after update. Cycling remains to OFF. So definitively a « bug » after update, that will cause most off users to have wrong auto-tags. @Egika @isazi did I missed something elsewhere ? If not maybe you could report to Suunto ?]
Thanks for saying this. Was the same for me.
As I mention before, I had UNPINNED/OFF special zones for running/cycling and it still not properly auto-tag. Somehow it forces special pace zones, even it is disabled.
Watch: Suunto Race S
-
@orzechszek said in Software Update 2.44.46 (2025 Q3):
@JonasLarsson said in Software Update 2.44.46 (2025 Q3):
@Tieutieu said in Software Update 2.44.46 (2025 Q3):
@Likarnik I checked and « special zones for running » was pinned ON on both my SV and SRs. I un-pinned it, maybe it was the reason power zones were used to tagg my exercise (and indeed they are not set properly)
I’m sure it was unpinned before update. => for me that’s the option that exclude power zones from calculation of intensity
@The_77 thank you. Well I recommend to all of you to check if after update you are not in my case, with this option pinned ON.I just asked 5 friends to check also.
[edit : my friend are all in the same situation => special zones for running was ON after update. Cycling remains to OFF. So definitively a « bug » after update, that will cause most off users to have wrong auto-tags. @Egika @isazi did I missed something elsewhere ? If not maybe you could report to Suunto ?]
Thanks for saying this. Was the same for me.
As I mention before, I had UNPINNED/OFF special zones for running/cycling and it still not properly auto-tag. Somehow it forces special pace zones, even it is disabled.
Excuse me, but what is auto-tag?
-
@JonasLarsson It’s when the app automatically tags your workouts based on exercise type - Aerobic, Anaerobic, Vo2Max etc.
-
@timecode Ah, I see. Thanks!
