Suunto Software update Q1 (2.53.42)

suzzlo

@off242 suunto uses bluetooth. Be sure varia has this enabled and its not paired with other device

off242

Is it a Garmin-specific protocol, @suzzlo, or will other BLE radars (such as Wahoo) work, too?

suzzlo

@off242 bluetooth is “the channel” then garmin is defining the protocol… i don’tthink this is an standard protocol

off242

@suzzlo Good to know. Over on a Wahoo forum, thought was that Varia had a proprietary BLE protocol, which is a bummer; I prefer the Wahoo radar to Garmin’s.

Regardless, I’ll continue to tinker and see what happens. Thank you for the quick response(s).

Tieutieu

HR recovery works perfectly fine. Tested after a bike ride (sensations are asked after test is performed)

To be noticed : in app the result says « normal » but the explanation says it’s supposed to be either « excellent / average / poor ». Don’t know if it’s a translation error or if it says normal because it’s first mesurement ? Not very important anyway.

This update sounds really great so far !!

EzioAuditore

@Tieutieu Yes it’s great and I also spotted the same: Normal

MikeC30

Thank you Suunto for such a great update.

Used intervals for the first time with in activity sound and vibration instead of having to remember to activate this in general settings before starting an activity. So freeing to know the watch would let me know when to start and stop, and then not to have to remember to change the sound and vibration settings back afterwards for day to day use.

What a wonderful update to the maps as well.

A few things still to sort out such as being able to customise what a long button push does during an activity but this update has made such an improvement to us users in day to day use. Please keep it up and continue to listen to the feedback given in the forum, it is so appreciated.

Thaler Martin

@dimitrios-kanellopoulos ?:)

SergioB

Hello everyone! First of all, great update! 🤩
I have a small question: I don’t get the difference between
Exercise options > Climb guidance > Notifications
And
Navigation options > Notification > next segment/segment start

To get the notifications of Climb guidance do I have to enable both? Or to avoid them, do I need to turn both off?

MarkG

Has anyone worked out how to customise the data on the map screen? Mine shows heart rate but I can’t work out how to choose other options (I’d like HR, Altitude and compass heading). Tapping the ‘tooth’ doesn’t change anything and my understanding from the release notes is that we could select a number of options from a list and cycle between them with a tap.
I have a vertical 2.

Audaxjoe

@MarkG on the map screen scroll down. It is one of the bottom option. Lots op options to choose from.

MarkG

@Audaxjoe Thanks for that prompt reply. I’ve got it now!

2b2bff

Thanks for the update. Another huge step forward.

First run after the update and suddenly there is no HR reading. I’m using the Suunto belt. Pausing the activity for a few seconds, like it has been described in the weeks before the update, did recover the HR reading, though.

Tieutieu

About alarms : new features are perfect.
Maybe best thing to me : the « infinite scrolling » for choosing hours/minute ! It comes latelly, but surely. Big « quick-win »

Kraisun Tunta

This is what a great update looks like
You can actually feel the difference—well done, team.
But… did you forget to add 2–3 new watch faces?

Danny poleg

Has anyone noticed a change in battery consumption - Vertical 2 with the new display (the one that came out with the limited edition) a drop of about 8% battery at night?
@dimitrios-kanellopoulos
@pavel.samokha

snow*

@Danny-poleg Race S. With the previous firmware version, I had battery drain. With the latest version, using the default WF, HRV, DND, barely 3% in almost 12 hours (19PM - 5AM)

elbee

@snow

Race s. Had it on the charging to update maps. Yesterday at 4 in the afternoon it was 100% charged when I took it of the charger. Now 8:30 next morning, it’s on 91%. No always on display, no bloodoxygen. Do have sleeptracking (but only because that is required to measure hrv). Dnd from 21:45 to 7:00.

Just as “bad” as the previous firmware.

snow*

@elbee said in Suunto Software update Q1 (2.53.42):

@snow

Race s. Had it on the charging to update maps. Yesterday at 4 in the afternoon it was 100% charged when I took it of the charger. Now 8:30 next morning, it’s on 91%. No always on display, no bloodoxygen. Do have sleeptracking (but only because that is required to measure hrv). Dnd from 21:45 to 7:00.

Just as “bad” as the previous firmware.

quite puzzling there’s such a difference (forgot to mention that wireless & discovery were off as well)

Stefano M64

@Tieutieu said in Suunto Software update Q1 (2.53.42):

HR recovery works perfectly fine. Tested after a bike ride (sensations are asked after test is performed)

I’m wondering if I have to stop the activity and wait for the HR recovery, or if it is performed automatically as the effort decreases