Suunto Software update Q1 (2.53.42)

off242

Have been unable to pair Garmin Varia (neither RTL515 nor RCT715) or Wahoo Radar through the Varia app. $:\$

Otherwise, really enjoying new features tested so far (customized alarms, maps) with swim drills on tap for this afternoon. Prost, Suunto!

Egika

@Stefano-M64 said in Suunto Software update Q1 (2.53.42):

@Brad_Olwin said in Suunto Software update Q1 (2.53.42):

@mich-heller It is in the Navigation screen afteryou select a sport mode and route.

the new navigation/climb features are great, a really huge improvement, and the customization of the data field on the map is fantastic!
However, I think it would be better to have to possibility to select that data field also before starting the navigation, as one of the settings of the chosen sport mode. If the selected data field would remain memorized for that activity would be the best.

The data field selection IS memorized per activity.

I guess the current implementation was easier to roll out with this update. Adding this selection to the sport mode customization would require a lot more programming effort in the data transfer to the app and in the apps themselves.

sky-runner

With regards to mixed unit customization, please consider adding one additional unit - vertical speed.

I know that technically this can be derived from the elevation unit, but some people prefer measuring vertical speed per hour while others might prefer per minute.

I strongly prefer feet / min.

With Garmin I can choose that but with Suunto that is still impossible.

UjcoCZ

@off242 said in Suunto Software update Q1 (2.53.42):

Have been unable to pair Garmin Varia (neither RTL515 nor RCT715) or Wahoo Radar through the Varia app. $:\$

Otherwise, really enjoying new features tested so far (customized alarms, maps) with swim drills on tap for this afternoon. Prost, Suunto!

You must it pair in activity menu, not in new Bluetooth devices like chest strap. Functional for me, reconnect also functional.
RTL 515 + V2, but I usually use Karoo3 and synchro ride into the Suunto app.

Stefano M64

@Egika said in Suunto Software update Q1 (2.53.42):

The data field selection IS memorized per activity.

I guess the current implementation was easier to roll out with this update. Adding this selection to the sport mode customization…

sorry, likely I used the wrong terminology, I meant to show the map data field selection somewhere in START screen, for example:
Exercise options - > Map settings
that is before starting the exercise. Having to set them after the exercise started is a bit cumbersome (you have to go to the Map screen and then go through the options)

off242

Yes, @UjcoCZ , went through activity menu after watching Janne Kallio’s video last night but still no joy. Glad it worked for you, though!

suzzlo

@off242 suunto uses bluetooth. Be sure varia has this enabled and its not paired with other device

off242

Is it a Garmin-specific protocol, @suzzlo, or will other BLE radars (such as Wahoo) work, too?

suzzlo

@off242 bluetooth is “the channel” then garmin is defining the protocol… i don’tthink this is an standard protocol

off242

@suzzlo Good to know. Over on a Wahoo forum, thought was that Varia had a proprietary BLE protocol, which is a bummer; I prefer the Wahoo radar to Garmin’s.

Regardless, I’ll continue to tinker and see what happens. Thank you for the quick response(s).

Tieutieu

HR recovery works perfectly fine. Tested after a bike ride (sensations are asked after test is performed)

To be noticed : in app the result says « normal » but the explanation says it’s supposed to be either « excellent / average / poor ». Don’t know if it’s a translation error or if it says normal because it’s first mesurement ? Not very important anyway.

This update sounds really great so far !!

EzioAuditore

@Tieutieu Yes it’s great and I also spotted the same: Normal

MikeC30

Thank you Suunto for such a great update.

Used intervals for the first time with in activity sound and vibration instead of having to remember to activate this in general settings before starting an activity. So freeing to know the watch would let me know when to start and stop, and then not to have to remember to change the sound and vibration settings back afterwards for day to day use.

What a wonderful update to the maps as well.

A few things still to sort out such as being able to customise what a long button push does during an activity but this update has made such an improvement to us users in day to day use. Please keep it up and continue to listen to the feedback given in the forum, it is so appreciated.

SergioB

Hello everyone! First of all, great update! 🤩
I have a small question: I don’t get the difference between
Exercise options > Climb guidance > Notifications
And
Navigation options > Notification > next segment/segment start

To get the notifications of Climb guidance do I have to enable both? Or to avoid them, do I need to turn both off?

MarkG

Has anyone worked out how to customise the data on the map screen? Mine shows heart rate but I can’t work out how to choose other options (I’d like HR, Altitude and compass heading). Tapping the ‘tooth’ doesn’t change anything and my understanding from the release notes is that we could select a number of options from a list and cycle between them with a tap.
I have a vertical 2.

Audaxjoe

@MarkG on the map screen scroll down. It is one of the bottom option. Lots op options to choose from.

MarkG

@Audaxjoe Thanks for that prompt reply. I’ve got it now!

2b2bff

Thanks for the update. Another huge step forward.

First run after the update and suddenly there is no HR reading. I’m using the Suunto belt. Pausing the activity for a few seconds, like it has been described in the weeks before the update, did recover the HR reading, though.

Tieutieu

About alarms : new features are perfect.
Maybe best thing to me : the « infinite scrolling » for choosing hours/minute ! It comes latelly, but surely. Big « quick-win »