Suunto Software update Q1 (2.53.42)

BrunoH

@Dimitrios-Kanellopoulos said in Suunto Software update Q1 (2.53.42):

@thailon we are doing our best to support the v1!

“Do or do not. There is no try” - Master Yoda

gkaempfer

What is the HR broadcast tested to work with? I got it connected to a Wahoo Elemnt Bolt v2 but no HR readings despite the successful pairing (Wahoo identifies the V2 as an ANT+ HR sensor).

EzioAuditore

@gkaempfer Worked great with the Garmin Edge 1050 I have. Not only that but pausing activity, moving away from the Edge all were without any issues. I am not sure that V2 has Ant+

gkaempfer

@EzioAuditore Wahoo devices tested so far all support ANT+ and all fail to show HR (despite pairing correctly). These include: Ace, Roam v3 and Bolt v2.

Alonzo

Thanks for the update and kudos to Suunto team!

I experience a bug with resources after the update: they basically stay way too high through days with small rises over night. This does not correlate neither with HRV, sleep duration and HR data, nor with how I actually feel.
Resources metrics worked never perfect for me, but it became a bit more useful from January till now.

Does anybody else experience similar bug?

HonzaS

@gkaempfer V2 doesn’t have ANT+. Just tried that on elmnt roam 2 and it connects as ANT+ and show nothing. Strange, it should be BT.

gkaempfer

@HonzaS I was also surprised to see it. My guess is that it’s some bug on the Suunto side. I’ve had a Coros watch connect to the Wahoo for years without issue.

Audaxjoe

@gkaempfer you can add Ace to that list. Same issue the wahoo recognised the broadcast but no HR.

It isn’t something I’d use as I normally would use a Polar strap which broadcasts to both.

larrybbaker

@gone-troppo seems to be user specific issue? My Vertical has no issues and lasts weeks. Not
Saying it should not be fixed for those that are experiencing it but not sure it’s widespread?

GiPFELKiND

@nathayogi said in Suunto Software update Q1 (2.53.42):

@Squirrel Same for my Race 2 : rebooting the watch causes rebooting pace zones.

Same here, Vertical 2

thailon

@Dimitrios-Kanellopoulos Hi, thanks for your update.
Does the doing the best mean we will receive any Q1? Bug fixies or even features? I’m asking just because its Q1 time and no info, feedback has been given by Suuno in SuuntoApp. Thanks!

Mattg576

@Stefano-M64 Took me a while to figure out why it wasn’t working for me, a short explanation in the update notes would have been handy (or seeing your post before I worked it out)

Александр Даниленко

@Dimitrios-Kanellopoulos

Thank you for the update. This is the first trully great update for swimmers.

Drill mode + lap button correction

I have some comments on what could be improved in future updates regarding swimming:

Do you plan to make the official structured workouts for swimming?

I tested them with a new update. I really like that now we can see in the table what exercise was done at each interval. But because it is not official for swimming still, the table is messy.

For example here:

What I actually swam:
400m Medley swimming legs (used a drill mode)
50m butterfly
50m backstroke
50m breaststroke
50m freestyle

I bought a Suunto HR Belt and tested it in water. There is same problem as with Polar Verity Sense, while using in a swimming pool.

Because of physics the Bluetooth signal can’t reach from watch to the HR sensor. Then when both are underwater, the connection is restored. Every time it happens, the watch give a signal (sound or/and vibration). It happens so often, that becomes annoying. Could you, please, add to the sounds settings a separate option for the HR sensor connection notification? So we don’t need to turn off all the sound and vibration during the training.

It could be nice if we could see a rest time between intervals, like in a “Swim timer” SuuntoPlus app. Also in the Suunto App statistics.

But thanks again for the update. It is really great)

Speed Man

Sometimes when I use three SuuntoPlus apps at the same time, my watch shuts down.

rawmtb

Hello, using a Suunto Race S. Since the update, I can’t move the map with my finger anymore, it stays locked and follows the route I have selected.

Also the new tooth with up to five data points can’t be touched to cycle through the data points.

I have no touch screen issues, other screens works, just not the map view during a sport mode recording.

Anyone having the same issues? Tried soft restart already.

Stoke80

Can please someone explain this phrase:

– We can share heart rate data with a heart rate monitor connected to the watch,
thereby improving connectivity with the heart rate monitor

I copied and translated it from Spanish to English from the presentation about the new software.

Since the update I was wondering if it is possible to broadcast HR, which is received from a belt (like Suunto HR belt), from the watch to another device.

As the Suunto belt can only be used with one target device.

Egika

@Stoke80 yes, you can broadcast the HR, which the watch receives from a belt.
I have used this sometimes during testing to use the HR belt data in two watches (belt connected to Vertical 2, broadcasting to Suunto Run).

Stoke80

@Egika

Thank you. That is very good news in general.

But for me it means it would not have been necessary to buy a Polar H10 to be able to have the HR on my watch and my Hammerhead :-(.

At least, the quality of the H10 is very good…

maszop

Vertical 2. Custom alarm.
There’s probably an issue with the alarm after the update. If the alarm is set while automatic DND (Do Not Disturb) is active, it doesn’t go off. Furthermore, the morning report displays an outdated/wrong alarm time – either a later time from before the change (during DND) or an alarm time from another day, e.g., Wednesday. Those times are identical – the Wednesday alarm time matches the pre-edited alarm time from other days.

I’ll monitor this for a few more days – I also suspect other data in the morning report is outdated. I’ll have to take photos though, because precise memory fails in the early morning. Anyone else have this problem?

Egika

@maszop I have tried this exact setup: alarm during auto-DND.
It has worked well and as expected for me.
Maybe try a reboot? Sorry, no other ideas…