Suunto Software update Q1 (2.53.42)

Egika

@rawmtb
Before starting an activity:
Select sport mode -> In the pre-start screen scoll to the bottom and select Exercise options -> Scroll down and select “Touch”

During the activity:
Press and hold the lower button -> scroll down and select “Touch”

Mattg576

@rawmtb Load an activity (you don’t have to start it) & go into exercise options, you’ll find ‘Touch’ in there mate.

Once set it’s remembered going forward.

@egika JINX

rawmtb

@Egika thanks a lot! This seems like a new option for the Suunto Race S. Problem is now solved and I can navigate the map with touch.

2b2bff

@Egika said in Suunto Software update Q1 (2.53.42):

What are your settings in the exercise options for “Touch”?
It needs to be set to “on” or “Map only” to work for this.

I honestly wonder why “Map only” isn’t the default after the update, as it is the same as before, I seem to remember. Or at least it is the most sensible option.

Mravac

This morning, my Suunto Vertical 2 wasn’t displaying notifications. So I turned the watch off and on again. But then a new problem arose: my step count jumped from 2,000 to 17,537?

sky-runner

@2b2bff said in Suunto Software update Q1 (2.53.42):

I honestly wonder why “Map only” isn’t the default after the update, as it is the same as before, I seem to remember. Or at least it is the most sensible option.

I noticed this too! I created a new custom sport mode and found that I couldn’t switch between multiple custom fields at the bottom of the map because the touch was disabled by default. I was wondering why I could choose multiple fields but see only one - at first I thought that was a bug. The “Map only” default makes much more sense.

Tieutieu

@sky-runner I get it. on my SRs, using the same parameters I have always had, daily consumption is back to what it was with previous updates

snow*

@sky-runner said in Suunto Software update Q1 (2.53.42):

@2b2bff said in Suunto Software update Q1 (2.53.42):

I honestly wonder why “Map only” isn’t the default after the update, as it is the same as before, I seem to remember. Or at least it is the most sensible option.

I noticed this too! I created a new custom sport mode and found that I couldn’t switch between multiple custom fields at the bottom of the map because the touch was disabled by default. I was wondering why I could choose multiple fields but see only one - at first I thought that was a bug. The “Map only” default makes much more sense.

uff wrong post, sorry

surfboomerang

@Speed-Man Sounds like a memory issue.

Stefano M64

Today, for the second time after the update, it happened that the custom alarm set to 06:40 ringed 10 minute later, as it was postponed. This time, I awaked by myself about 15-20 minutes ahead the alarm time and I’m pretty sure I didn’t touch any button. DND was set from 22:30 to 07:30.

tomtom73

![alt text] (image url)

Since the update the weekly total is off nad sometimes it goes back to the correct value. I guess this is a bug ?

André Faria

Thank you for this update. Got a Race S Ti and broadcast heart rate was something I was missing from garmin. Done now.
Keep up the great work

tomahawk5000

Hi All,
Check this watchface:

I don’t know why but VO2MAX is not updating after training

My VO2MAX is getting down after today’s run (don’t judge me) but on the watchface I can see old data

Stefano M64

said in Suunto Software update Q1 (2.53.42):

Today, for the second time after the update, it happened that the custom alarm set to 06:40 ringed 10 minute later, as it was postponed. This time, I awaked by myself about 15-20 minutes ahead the alarm time and I’m pretty sure I didn’t touch any button. DND was set from 22:30 to 07:30.

Also this morning the alarm ringed 10 minutes later (!)
I have changed to time to 6:30 and then back to 6:40,
lets see what happens tomorrow morning …
Nobody else is experiencing the same odd behavior?

snow*

@Stefano-M64 said in Suunto Software update Q1 (2.53.42):

said in Suunto Software update Q1 (2.53.42):

Today, for the second time after the update, it happened that the custom alarm set to 06:40 ringed 10 minute later, as it was postponed. This time, I awaked by myself about 15-20 minutes ahead the alarm time and I’m pretty sure I didn’t touch any button. DND was set from 22:30 to 07:30.

Also this morning the alarm ringed 10 minutes later (!)
I have changed to time to 6:30 and then back to 6:40,
lets see what happens tomorrow morning …
Nobody else is experiencing the same odd behavior?

For me it’s ok so far. DND set to 22pm-6am and alarm set to 6.15am (weekdays). Race S.

Inge Nallsson

@Mravac said in Suunto Software update Q1 (2.53.42):

my step count jumped from 2,000 to 17,537?

This is an old, old ‘bug’, where a bucketload of phantom steps gets tacken on to the current day when the watch is booted up (think it also can happen with the calories). But these phantom numbers silently disappear when the date ticks over to the next day. Leaving no trace anywhere.

I’ve mentioned it in a post far back, but can understand that it hasn’t garnered any attention or fix. We’re not supposed to turn the watch off in the first place…

André Faria

Not sure if related to this firmware, since I have the watch for little time and I am alternating between it and my fr965, but now when I don’t sleep with it, it counts sleep till I come back to it.
So for two days I get 18h of sleep.
Any hint to delete it ?

duffman19

@Stefano-M64 said in Suunto Software update Q1 (2.53.42):

Also this morning the alarm ringed 10 minutes later (!)

Could it be that you’re accidentally snoozing the alarm via the touchscreen? It has been discussed a few times on the forum how it is too easy to dismiss or snooze an alarm because the touchscreen activates when an alarm goes off. I’ve done this many times and have even witnessed an alarm being dismissed because the watch face inadvertently touched my bed sheets (maybe that’s fabric specific?).

Anyway, my preference would be to require a button push to dismiss alarms.

Inge Nallsson

@André-Faria said in Suunto Software update Q1 (2.53.42):

Any hint to delete it ?

I have no Idea. My watch is turned off all the time between activities and I only tried out the sleep logging a week or so at the beginning. Disabling sleep tracking in the watch should take care of future falsehoods for you, but unless there is an option to edit already registered sleep downwards to near zero, elimination can prove hard - seem to remember previous postings about not being able to delete, but don’t quote me on it.

Stefano M64

@duffman19 said in Suunto Software update Q1 (2.53.42):

@Stefano-M64 said in Suunto Software update Q1 (2.53.42):

Also this morning the alarm ringed 10 minutes later (!)

Could it be that you’re accidentally snoozing the alarm via the touchscreen? It has been discussed…

I know, but I was already awake the last two times and didn’t hear any ring… while it clearly ringed 10 minutes after, until I dismissed the alarm… very strage

Anyway, my preference would be to require a button push to dismiss alarms.

yes, it would be the best choice