Suunto Software update Q1 (2.53.42)
-
@Stoke80 yes, you can broadcast the HR, which the watch receives from a belt.
I have used this sometimes during testing to use the HR belt data in two watches (belt connected to Vertical 2, broadcasting to Suunto Run).t6, S6, Elementum Terra, Ambit 3 Sapphire, Spartan Ultra Copper, Traverse Alpha, S7 Graphite LE, S9B Ambassador, S9P Titanium, S9PP Titanium, Vertical All Black, Race Titanium Charcoal, Race S Titanium Courtney, Run Lime, Race 2, Vertical 2 Titanium
-
Thank you. That is very good news in general.
But for me it means it would not have been necessary to buy a Polar H10 to be able to have the HR on my watch and my Hammerhead :-(.
At least, the quality of the H10 is very good…
-
Vertical 2. Custom alarm.
There’s probably an issue with the alarm after the update. If the alarm is set while automatic DND (Do Not Disturb) is active, it doesn’t go off. Furthermore, the morning report displays an outdated/wrong alarm time – either a later time from before the change (during DND) or an alarm time from another day, e.g., Wednesday. Those times are identical – the Wednesday alarm time matches the pre-edited alarm time from other days.I’ll monitor this for a few more days – I also suspect other data in the morning report is outdated. I’ll have to take photos though, because precise memory fails in the early morning. Anyone else have this problem?
-
@maszop I have tried this exact setup: alarm during auto-DND.
It has worked well and as expected for me.
Maybe try a reboot? Sorry, no other ideas… -
@rawmtb said in Suunto Software update Q1 (2.53.42):
Hello, using a Suunto Race S. Since the update, I can’t move the map with my finger anymore, it stays locked and follows the route I have selected.
Also the new tooth with up to five data points can’t be touched to cycle through the data points.
I have no touch screen issues, other screens works, just not the map view during a sport mode recording.
Anyone having the same issues? Tried soft restart already.
What are your settings in the exercise options for “Touch”?
It needs to be set to “on” or “Map only” to work for this. -
@Egika Here’s what happened: I set the alarm for 7:15 every day initially (Custom alarm: Mo, Tu, Wed, etc.). Then I changed all days except Wed and Sun to 6:15 am (a time during DND). Since then, every morning report shows 7:15. The alarm never goes off – not at 6:15, not at 7:15 – and I also think other data in the report is wrong.
I’ll try reboot/soft reset.
-
@Egika do I set this on the watch directly? Could you point me to these settings?
-
@rawmtb
Before starting an activity:
Select sport mode -> In the pre-start screen scoll to the bottom and select Exercise options -> Scroll down and select “Touch”During the activity:
Press and hold the lower button -> scroll down and select “Touch” -
-
@Egika thanks a lot! This seems like a new option for the Suunto Race S. Problem is now solved and I can navigate the map with touch.
-
@Egika said in Suunto Software update Q1 (2.53.42):
What are your settings in the exercise options for “Touch”?
It needs to be set to “on” or “Map only” to work for this.I honestly wonder why “Map only” isn’t the default after the update, as it is the same as before, I seem to remember. Or at least it is the most sensible option.
Race S
-
This morning, my Suunto Vertical 2 wasn’t displaying notifications. So I turned the watch off and on again. But then a new problem arose: my step count jumped from 2,000 to 17,537?
-
@2b2bff said in Suunto Software update Q1 (2.53.42):
I honestly wonder why “Map only” isn’t the default after the update, as it is the same as before, I seem to remember. Or at least it is the most sensible option.
I noticed this too! I created a new custom sport mode and found that I couldn’t switch between multiple custom fields at the bottom of the map because the touch was disabled by default. I was wondering why I could choose multiple fields but see only one - at first I thought that was a bug. The “Map only” default makes much more sense.
Suunto: Ambit, Ambit 3 Peak, 9 Baro, Race S, Race Ti, Vertical 2 Ti
Garmin: Forerunner 210, Forerunner 610, Fenix 6X, Fenix 7X Ti -
@sky-runner I get it. on my SRs, using the same parameters I have always had, daily consumption is back to what it was with previous updates
-
@sky-runner said in Suunto Software update Q1 (2.53.42):
@2b2bff said in Suunto Software update Q1 (2.53.42):
I honestly wonder why “Map only” isn’t the default after the update, as it is the same as before, I seem to remember. Or at least it is the most sensible option.
I noticed this too! I created a new custom sport mode and found that I couldn’t switch between multiple custom fields at the bottom of the map because the touch was disabled by default. I was wondering why I could choose multiple fields but see only one - at first I thought that was a bug. The “Map only” default makes much more sense.
uff wrong post, sorry
-
@Speed-Man Sounds like a memory issue.
-
Today, for the second time after the update, it happened that the custom alarm set to 06:40 ringed 10 minute later, as it was postponed. This time, I awaked by myself about 15-20 minutes ahead the alarm time and I’m pretty sure I didn’t touch any button. DND was set from 22:30 to 07:30.
Suunto Vector . Vector HR . Core . Race & Race S
-
![alt text]
(image url)Since the update the weekly total is off nad sometimes it goes back to the correct value. I guess this is a bug ?
-
Thank you for this update. Got a Race S Ti and broadcast heart rate was something I was missing from garmin. Done now.
Keep up the great work -
Hi All,
Check this watchface:
I don’t know why but VO2MAX is not updating after training
My VO2MAX is getting down after today’s run (don’t judge me) but on the watchface I can see old data
