oCycler - FTMS bike link: power & cadence
-

Doesn’t work with my bike. Could you fixed it? -
@Frederick-Rochette I surely can try, from what I’ve seen so far this bike is slightly problematic. I will need some bluetooth data dump to make it work.
https://forums.zwift.com/t/horizon-cr7-slow-after-zwift-new-app/583685/2
Could you please drop me a message to the email address from the app description? I’ll let you know which data is needed and how to collect it. Alternative you can try using QZ app that would covert the signal to the proper FTMS -
@Stavrogin The way SuuntoPlus SDK is imlemented is a little limiting in that regard, developers can record into the custom data fields, but can’t overwrite the standard .fit fields like power or cadence, therefore no, unfortunately the TSS is still calculated through based on HR, and the ftms collected data is simply recorded in the workout summary using the custom fields.
Saying that, I already reached the Suunto partners contact, asking whether there are any ways to bypass that limitation, as I would like to have the proper power based TSS calculations myself.
I’ll keep you guys posted
-
Jetblack BT
Maybe the power is just streamed using non-standard signature, please email me at the email listed in the app description. We can try to debug that and make a custom fix for your bike if it’s possible
-
Future update, altough probably delayed as I can’t access my SuuntoPartner account for some reason

-
@oleksandr One thing I failed to mention in my first post, I completed a full session of testing it and it recorded my speed, power, and cadence throughout the 1 hour ride but failed to record my distance (read 0 miles throughout and 0 in the workout summary). This is on my kickr bike V2. Is this a known bug/issue you’ve seen? Any fix for it?
-
@KSGravelJunkie I’ll probably require a fix tailored to your bike specifically. Drop me an email to the address provided in the app description
-
@KSGravelJunkie I ride virtually on MyWoosh on my KICKR and all metrics except the distance are recorded. I always have to edit the ride afterwards and add it manually from what I read in the application. But honestly I do not care as actually I did not move
and especially if I do some interval training the speed and distance shown there make often not realy sense to me (ERG mode thing, I believe) It’s the Watts which I’m interested in mainly… -
@johann.fuehrer Thanks for the feedback! Glad I’m not the only one.
@oleksandr do you need a fit file? maybe I can try again and email it to you?
-
@KSGravelJunkie I’ll need the specific protocol recording (the data that the bike streams in real time, email me and I’ll send the tutorial on how to record that
-
Hello guys, please welcome v2 with the new mode
The new power mode with color coded power, more actionable
And the classic one, that resembles the structure of the v1, but redesignedAlso the HR gauge is added to views
Hold down (bottom) button to switch between the modes

-
@oleksandr
Hi,I’m using oCycler with a Suunto Race and Zwift Hub.
During a 30-minute indoor cycling session, power, speed and cadence were all displayed correctly in real time.
However, after syncing with Suunto App, distance was 0.00 km and average cadence was incorrectly recorded as 1 rpm.
Power data was recorded correctly.
Could you please look into these issues?
Thanks!
-
@PacoHdez could you please send me the .fit file of that workout to the email specified in the app description?
-
@oleksandr
Hi
Sent -
@oleksandr First of all, thank you very much for the app. The app shows that it is possible to connect Suunto watches to BT FTMS devices.
Yesterday I have done a 2 minute short test. My setup is: Decathlon V500 V2 indoor trainer (Ant+, 2x BT). The Garmin Edge 530 controls the trainer via Ant+. Suuunto Race 2
I set the power to 160W for testing (Edge set to 160W). While riding, I connected my watch using the oCycler app. The watch connected and began displaying power and other metrics correctly.
At that point, the Garmin Edge lost the ability to control the trainer. Changing the power to a different value had no effect; the trainer remained locked at 160W.
I have a few questions
I’m wondering if this is an issue with the app or the trainer itself?
Is it possible to update the app to add the ability to control power directly from the watch?
Is it possible for the Suunto app to read power (say, natively) in a way that calculates the TSS power value?
The oCycler app generally allows you to read power through the watch. When I try to pair the Race 2 directly with the trainer, the watch only detects cadence and speed. -
1.I’m wondering if this is an issue with the app or the trainer itself? - this does seem like an issue with the trainer unfortunately
2. Is it possible to update the app to add the ability to control power directly from the watch? - That would require the ERG mode implementation - I wanted to implement that initially, maybe still will, but that would take a lot of effort and time and given that I have not received a single response from suuntoplus team regarding the feedback I forwarded to them - the willingness to do so is less and less
3. Is it possible for the Suunto app to read power (say, natively) in a way that calculates the TSS power value? - No, this is the SDK limitation, the community apps can’t record data into the native .fit files, only to the dev data fields that are not used for any calculations. I sent feedback (and questions, and suggestions) about this to now former suunto employee responsible for suuntoplus, but one letter was not responded and the other bounced back with the error as he no longer works for the company, there were no response from the general support partners email too. In case if there’s some workaround on the horizon - I’ll reimplement that part of the app ASAP
4. The oCycler app generally allows you to read power through the watch. When I try to pair the Race 2 directly with the trainer, the watch only detects cadence and speed. - When you pair directly - it connects through BLE CPS (power) and CSCS (cadence and speed), not FTMS - that is the separate protocol. The fact that my indoor bike doesn’t support CPS/CSCS pushed me to develop this app in the first place. Seems like your bike only streams CSCS. -
@dimitrios-kanellopoulos can you recommend someone at Suunto who could help @oleksandr with his questions?

-
Hey @Maryn, are you a mac user? I’ve been working on a mac app that could act as bridge lately. Might make the ios/ipad os version soon.

-
@oleksandr Unfortunately, I only have an iPad

An Android phone and a Windows PC. -
Hi oleksandr. Congratz on great app, works nicely. I started to vibe code my own app and claude geve me your as example. I abandon mine, i like yours more :D. Fingers crossed that someone from suunto responds. Because I would also like ERG option. Also, about workout editor, does it needs suunto to do something, or its possible to develop it as standalone app? Would be nice to have that option to create few predefined templates for working out.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login