Continued Incorrect Ascent Readings
-
Very sorry Dimitrios, I just haven’t had much succes in dealing with Suunto to date - I really hope you can help me out.
My latest activity from today is provided below:
https://www.suunto.com/move/nickvlahandreas/5e5ca0b145dea40e66056872
Cheers,
Nick
-
@Nick-Vlahandreas I do see the issue on your data.
The general profile looks well.
However zooming you can see some dips and hights that add to your activity ascent and descent.
The reported ascent from the watch is ~1300 wile the true one should be 500-600
2 Questions:
- Where do you place the watch?
- Was it raining?
- Do you always have this issue or just sometimes (even if sometimes it’s many times)
Ok those where 3 questions
-
Thanks for looking at it so quickly.
To answer your questions:
- On my left wrist.
- Beauttiful sunny stable day.
- Always happens. Has been happening since Nov 19, otherwise the watch worked perfectly.
-
@Nick-Vlahandreas we didn’t push anything that affects the altitude. Typically people here complain for undercounting ascent.
I assume it’s the baro model correct?
-
Yes, its the baro model and its brand new from warranty.
-
@Nick-Vlahandreas Roger that.
3 solutions.
- One is my suspicion : Dirty / blocked sensor
- Two is the way you wear the watch, with biking eg when you stand, the sensor holes get blocked and pressure increases , thus those dips happen.
- Three ask for a replacement and I ll put a note to replace the unit
For 1.
Let the watch soak for 10minutes on lukewarm water. Take it out, and flush under the tap the pressure sensor holes. Make sure you see water coming in and out. Repeat this 3 times. Test afterwards. You can test this via a normal walking activity.
For 2
On your next bike ride:
- USe a buff behind the watch (where the pressure holes are) so skin wont go there in case you push up on the bike. Or change position. You can mount it for example on the bike. A. quick mount can be done via the foam of the box (no need to buy) like the screenshot I ll attach on the end of this comment.
For 3
If all the above fail , I can help asking for a replacement for you.
TIPS how to create a 0 cost mount from the Suunto box:
Cut this hole on the foam part of the box
-
Thanks Dimitrios.
I can rule out 1 and 2 as I’ve alwways worn my watch on this hand and had no issues for a year. Secondly, the watch is brand new and the sensors are no dirty.
So, I’d be more than grateful if you can help me out with another new unit.
Regards,
Nick
-
@Nick-Vlahandreas I do see those dips there so please first give a chance to rule those out please. Even if the watch is new , this can happen typically when eg shower foam / soap condenses.
That said, if you insist, open a case normally though support (support@suunto.com) and pm me the case number.
-
@Nick-Vlahandreas said in Continued Incorrect Ascent Readings:
Thanks Dimitrios.
I can rule out 1 and 2 as I’ve alwways worn my watch on this hand and had no issues for a year. Secondly, the watch is brand new and the sensors are no dirty.
So, I’d be more than grateful if you can help me out with another new unit.
Regards,
Nick
This is not normal. And your second watch!!?? It is got to be something with your setting. Do you use altimeter, barometer or automatic mode for altitude?
-
@zvonejan those are not used anymore
-
@Dimitrios-Kanellopoulos enlighten me about this please, even if a MC is used?
-
@Dimitrios-Kanellopoulos said in Continued Incorrect Ascent Readings:
@zvonejan those are not used anymore
ups :). yes only in movescount and ambit 3. sorry
-
@nseslija he uses Suunto app
-
@zvonejan also S+Spartans but it’s no longer needed. (Altitude is the best option atm)
-
@Dimitrios-Kanellopoulos ok, thanks, I was wondering if this is still around for SA use only…
-
@Dimitrios-Kanellopoulos said in Continued Incorrect Ascent Readings:
@zvonejan also S+Spartans but it’s no longer needed. (Altitude is the best option atm)
Watch measure air presure and shows that like altitude. We all know that air preasure changes can came from 2 sides ( altitude, barometric changes). So if you run around stadium, suunto 9 can show you altitude changes, which is ridiculous. On ambit you just set to barometer and all changes are consider as weather changes and that is 100% correct. Am I wrong, Dimitri?
-
@zvonejan said in Continued Incorrect Ascent Readings:
2 sides ( altitude, barometric changes)
actually, barometric changes (the sensor is a barometer) will be interpreted as altitude or weather changes.
For Ambit (and in the past for Spartans+S in MC) you can set in which way sensor data must be used.
Readings are 100% correct if you set this option correctly
Now on Spartans+S this option is “always” set to automatic and switches based on the other data -
@sartoric said in Continued Incorrect Ascent Readings:
Readings are 100% correct if you set this option correctly
Only on stadium with barometer mode. If you set watch to altitude or automatic mode and run trail running, there is no guarantee, that all ascent difference is from altitude (some percentage is definitelly from weather changes). Only for old suunto watches of course
-
@zvonejan
Well, yes, if you do trail running in “alti” mode and the weather is rapidly changing too the result could be distorted -
@Nick-Vlahandreas
try Dimitrios’ suggestion with the buff…
I can write books about wrong readings when the strap is too tight or when the wrist position pushes the watch against the arm e.g. during gym workouts etc
