Suunto 9 Peak (review and specs)

[surfboomerang]

@inkognito Thanks anyway

[Bulkan]

@surfboomerang is the same data and course. But looks like it will be improve.

[isazi]

@bulkan yeah at the moment the alti profile on the Peak is a bit flattened, probably due to difference in screen size.

[Egika]

@surfboomerang said in Suunto 9 Peak (review and specs):

@dimitrios-kanellopoulos You’re right. Maybe it is interesting for downhill kayaking (or how is that sport called?)

White water kayaking. The problem there is you get a lot of water on the sensor, sometimes submerging it etc.
You still get a good idea of the altitude profile and that is the reason why it makes sense to keep altitude data for kayaking. This is the way it is

[Dimitrios Kanellopoulos]

@egika I have to check with the S9P sensor and water. To me it looks it works better as the sensor doesn’t get water stuck in

[isazi]

@egika yes, what I would do is similar to what already happens with other sports such as MTB, where you have different specializations. When choosing Kayaking I would like to have two profiles: flat water, white water.

[Egika]

@dimitrios-kanellopoulos the screenshot above is from S9 - i am happy with this given the challenging conditions
@isazi : good idea

[freeheeler]

@egika
for white water kayaking uphills could be filtered and maybe there’s a reasonable algorithm to detect submerging the watch: unless you take a huge waterfall drop, there’s no reason to suddenly rise the pressure.
Maybe it sounds a bit ignorant as rivers follow a certain topography and I bet some kayakers would like to record this, too… but what if only start and end alti is recorded and delta is the descent?

[Dimitrios Kanellopoulos]

@freeheeler said in Suunto 9 Peak (review and specs):

for white water kayaking uphills could be filtered and maybe there’s a reasonable algorithm to detect submerging the watch: unless you take a huge waterfall drop, there’s no reason to suddenly rise the pressure.

we do do that. But water sticks and influsences

[Dimitrios Kanellopoulos]

Last update and charge of the watch was 6 days exactly ago, the morning of 26th May.

• All on (24/7 tracking etc) except notifications. Standbylight always on, on adoptive mode. No raise to wake as it’s not needed for this config.
• White watchface
• 4h of GPS with Gallileo (consumes more than GPS only)
• 2 FW update on the 26th and 28th of the month (transfer FW via BT + install )
• Several checks on the watch and playing around for pics etc
• DND from 22pm to 8am
• Several pairings with SA due to development

I am now at 29% battery left

I suppose its good.

[dulko79]

@dimitrios-kanellopoulos how often does sensor check daily heart rate, every second or within certain time interval?

[Dimitrios Kanellopoulos]

@dulko79 some time interval not every second. I dont know the specifics but it should be around 5-10mins. It does have somewhat a cleverness there. Also it will change this a bit in the future.
But I dont think that OHR is the main drainage in battery on the s9P.

[dulko79]

@dimitrios-kanellopoulos cleverness, like if you are sitting still at the desk working, then you get up and start walking. Peak then changes sampling rate for hr based on movement?

[Dimitrios Kanellopoulos]

@dulko79 Unfortunately I dont know the specifics. What I do know is that atm there are a few features missing. For example “sensing” that the watch is not worn / tight (sensor skin contact). That should come asap.

[freeheeler]

@dimitrios-kanellopoulos
brilliant

[Mff73]

Question about OTA that comes to me :
If SA becomes the only way to upgrade S9P, and something went “wrong”, is there similar workaround like with Suuntolink drag’drop FW file?

[pilleus]

@dimitrios-kanellopoulos said in Suunto 9 Peak (review and specs):

I am now at 29% battery left

YOU should be at 100 %! Life is short and every moment matters …

[isazi]

@mff73 if something goes wrong while updating, the latest stable firmware that was on the watch is installed.

[Dimitrios Kanellopoulos]

@mff73 you always have the last FW in the watch to be able to revert.

You can actually reset the watch without SL

[A Former User]

@dimitrios-kanellopoulos Since you are appearing to be using the S9P as your daily driver, I have a few questions if I may:

• How does adaptive backlight works under DND? Currently S9B dims the screen during DND, is this preserved or the screen will be made dim regardless of DND if it’s dark and adaptive mode is used?

• What about sounds (beeping) during notifications? Anything done there? With S9B there’s no way to disable sound for notifications only. So, either you hear a beep every time a notification comes, or use DND that defies the purpose (and makes the screen dim in the process), or disable all sounds, which also carries over to activities

• I’m still seeing zombie notifications on 2.14.16 and the only way to cure it appears to be restarting the watch that resets Body Resources to 50%, which reminds me…

• Any improvements to Body Resources sometimes funky behavior? On 2.14.16 firmware, I had it drop from 91% to below 50% in two hours the watch was on the charger. Not cool. The other day Resources were about 20%, I went for 50 minutes weight lifting, and the value jumped to 45% Who knew some flies, curls, and cleans can supercharge you?

• Last but not least, are we getting S9B sleep tracking (awake/light/deep) or S7 more advanced phase analysis (awake/light/deep/REM)?

As always, thanks a lot for any insights.