Suunto Vertical: Bug Collection

[plopes73]

@Dimitrios-Kanellopoulos @isazi I’ve noticed now that Vertical deactivates vibration below 20%. No vibration for alarms or auto-laps in running. My main concern are the alarms though…20% is almost one full week.
I’m on latest FW 2.33.14 Vertical Solar

Do you know if this will change in the future? Is there any workaround or setting to avoid this automatic vibration deactivation?

Cheers
Pedro

[jjpaz]

@plopes73 I’ve noticed that vibrations are shorter and lighter (auto laps) but nor really deactivated, did you notice that?

[cosme.costa]

@plopes73 I also noticed this, I guess is a “battery saving” feature, but as you said with 20% you still have battery for several days, I would like this activated under 10% or something similar.

[plopes73]

@jjpaz no, on my watch vibration are totally disabled under 20% , except for notifications if I recall . As soon as I get under 20% I’ll test it again.

[freeheeler]

@plopes73
it is a known issue. I am always surprised myself when this happens, because it happens so rarely
I have noticed that I don’t look at battery life estimation and on charge level… the missing vibration tells me it’s about time to charge in 3-5 days

[dzembronja]

@jjpaz Hello, I have lost this widget, where can I find this recovery widget? and problems with maps location Ukraine

[thanasis]

i have a strange new “problem” lately of minor importance though:

the oHR is turning on at random times while i have turned it off . The difference to the previous situation is that I enabled the widget for Blood oxygen (and its metrics)

I don’t really mind about the oxygen because it typically gives erroneous valus of no interest to me but for some reason i tend to relate those two things

[Martin Vrska]

@trailcafe Hello. Lately I’ve had this error: the media player seems to be greyed out, music is playing, even the track titles are changing, but it’s not controllable with the watch. I’ve tried powering the watch off/on, doing a soft reset, removing and basically adding the “media control” option, but nothing helps. Does anyone have any idea how to fix this? This error appeared long after the last SW update.

[Todd Danielczyk]

@Martin-Vrska I have the same; where it does not allow you to control the media from the touch screen. It will also hang up or not switch between various media platforms (music, podcasts, etc.) that are both native and added to my Android phone.

[Martin Vrska]

@Todd-Danielczyk Thanks for your response. I just don’t understand why this is happening for no apparent reason - as we have already stated - I have been observing this for the past week.

[Todd Danielczyk]

@Martin-Vrska I didn’t see it grey out on previous firmware but have seen it on 2.33.14.

The switching from media players (in my case Oto Music, Podcast Republic on Android) has been there since I’ve owned the Vertical. That and the media countdown timer not refreshing when replaying a track is something I have also seen.

[Martin Vrska]

@Todd-Danielczyk Unfortunately - even the update to 2.33.16 beta and resetting the watch, but didn’t help.

[Shrek3k]

I am quite annoyed, as my Vertical crashed / froze in the map view in the middle of an activity, after 4,6km of planned short 6,5km-Oslo-city run.
After a restart the run was synchronized … at least the part until the Vertical froze.
What was active/activated:

• the route
• map view
• external HR-monitor (Wahoo Tickr Fit … as usual)
• Burner-App

Anything special? Not really, usual weather, changed the size of map once (shortly afterwards it froze)!

[thanasis]

The tones and vibration seem not correct . Setting the tones as to vibration the watch still rings on notifications

[isazi]

@Shrek3k did you send logs after the event?

[thanasis]

@thanasis
Today I observed the oHR while at rest to start increasing to 150+… while the actual Hr was around 80-82 (measured via a medical device)
I changed it to various positions without any success

I had to turn off the switch and the turn oHR measurements and the watch started 85-86 (normalish values )

Never have I observed such a strange behaviour before

[babychai]

@Shrek3k
happened to me twice this year during hiking activity. Froze in the map view. So i need to do soft reset. After synchronized the ascent and descent value in SA is show zero. I didn’t turn on any Suunto+

[Shrek3k]

@isazi unfortunately not. As I have no fully accessible computer with me I could not create the log-file … I will check when I am at home today what I can export before doing the next activity tonight. Depending on the result I will send the log and the fit-file to support.

[isazi]

@Shrek3k logs are sent via the app, not a computer. But it is probably too late at this point, the log file is overwritten more or less every 24 hours as far as I know.

[Shrek3k]

@isazi OK. I searched for a description how to create log-files, as I could not find the option in the app, and found a description in the lounge, which mentioned the computer. I will check and search, and will be prepared the next time … (Although another crash might create more intense reactions )