Suunto ZoneSense

halajos

ZoneSense data in the mobile app seems to be affected by pausing the activity. Below is a chart from today’s ramp test I attempted on a treadmill, trying to get thresholds calculated by ZoneSense. I had to pause the watch as the treadmill was initially set to displays speed in imperial units and I had to figure out how to set it for metric system. The intensity zones are shifted toward the right, where on the watch I saw VO2max zone az the highest intensity level, in the last 5 minutes. The watch was paused for about 6-7 minutes, which looks to be aligned with the shift on the chart.

herlas

@Ian-Munslow ZS is a 3 zones schema and it won’t align with 5 zones schema from the start, however, over time when you get thresholds measured by ZS and a good sense of what your thresholds are, you can update Z3 to aerobic threshold value provided by ZS, and similarly, Z5 to your anaerobic threshold. Even though ZS is based on 3 training zones, once you do above, discrepancy between ZS 3 zones and the 5 zone schema will be less and less. In my case I don’t put same attention to the 5 zones anymore,I find ZS 3 zones way simpler and more realistic.

far-blue

@Ian-Munslow You don’t mention how your HR zones were set but unless they were calculated after recently attending a lab-based LT and VO2Max testing session then I’d suggest the ZS values are going to be more accurate and you should consider using the ZS info to adjust your HR zones I suggest this because ZS is (almost) directly measuring the LT1 and LT2 thresholds while most of us set our HR zones based on a Max HR effort test every now and then and some guesswork based on percentages.

pilleus

Please, Suunto, fix the bug in ZoneSense that when an additional sport app is selected, ZoneSense no longer shows the pointer on the outer ring (green, yellow, red zone) and instead a 00:00 is shown in the graph in the middle of the display. Without the pointer, I don’t know where in the current area (green, yellow, red) I am currently moving and in which direction ZoneSense is moving.

Thanks for reading!

herlas

@pilleus do you experience this issue with any S+? Specially for S+ climb, one trick to get it working with ZS is to add it once ZS 10 mins warm-up has passed.

far-blue

@pilleus I’ve not experienced this. I’ve used ZS alongside structured workouts (from TAO) during training and alongside the hydration app and the last-km apps during races (different races, obviously) as well as alongside snap-to-route and normal routed navigation with climb guidance. This is with my Race S. Are there specific sports apps that cause it?

pilleus

The combination ultra walking and ZoneSense doesn’t work for me. And it’s no option for me to wait 10 minutes and then activate the s+ app. It’s just a workaround to fix a faulty behaviour.

wakarimasen

@Dušan-Ković said in Suunto ZoneSense:

I will add videos here, so they are easier to find:

EP1: https://youtu.be/YBVSs8ju0JM
EP2: https://youtu.be/XFbgiljNBXc
EP3: https://youtu.be/-fidaYqS988
EP4: https://youtu.be/bD3O4BZ9vIc

as I understand it HR belt is a must, because it needs HRV measurement. I wish this could work on Verity Sense or similar optical HR bands.

These videos are superb! I only just got around to watching them, and I now (for the first time) really understand the metrics that have confounded me for the last few years.

daveathletic

Hi there, would you recommend to set HR zones according to Zonesense values?
I have been trying to get my Zones more or less accurate but it seems they don’t fit with the Zonesense values. Any help appreciated.
For example, Zonesense displays my aerobic threshold between 153-159 bpm max. So Zone 2 would be probably somewhere between 130-160 bpm.
How should I setup my zones if using Zonesense values.
Just curious if these values are good to use if you don’t want to do a LT and VO2 max test in a sports lab.
Thanks for your help.

Danny poleg

A small recommendation
To add to suunto Plus zonesense the current running pace so that it well be possible to maintain a pace while examining which zone I am in.
Today while running 22 km I really wanted to know how the running pace affects the zone sense without pressing buttons
@isazi
@Dimitrios-Kanellopoulos

Egika

@Danny-poleg you have this already. In the S+ settings in the app, you can select which data to cycle with the top button in the ZoneSense screen.

Danny poleg

@Egika
I checked - thanks
While I’m on the ZONESENSE screen, pressing the top button switches between data and adjusts the color spectrum according to the zone I’m in

Francesco Pagano

@Egika can you actually switch through those data fields with the upper button?
I can only see
Pace - Hr
Power - HR
Ascent - Descent

Brad_Olwin

@Francesco-Pagano You can set which data fields you want in the Suunto App, then you will have the three you selected available.

Brad_Olwin

@Danny-poleg The top button press will not change the color spectrum or it should not.

Danny poleg

@Brad_Olwin only on iphone
This option does not exist on Android

althaea35

@Danny-poleg this works a described for me on Android (Galaxy s23).

Danny poleg

@althaea35 !
Unfortunately this is what I see in the app what am i doing wrong

A Former User

@Danny-poleg I get that screen as well when the watch isn’t connected/synced to the app. Once it’s connected, it works better.

althaea35

@Danny-poleg

I see this with watch connected.

Have tried (the old) unload reload the app?