Software Update 2.43.8/.12 (2025 Q2)

Artus Diver

Thank you for the information.
Yes, the application has been improved, but:

the swimming distance is still zero "0"m,
the distance covered during the exercise is only for information purposes,
the swimming time is only measured locally on the watch,
the exercise time starts when you press “Start Drills” and is different from the time of the entire activity (for example, the activity time is 2’53 and the exercise time is 1’42, which is not saved anywhere),
there are no statistics after saving the exercise,
the exercise distance is not related to the declared pool length (for example, 25m), you have to manually enter the exercise length,
you can enter different lengths, but why??? For me, as a swimmer, it is interesting to see, for example, the 100m statistics divided into 4x25m and not just 100m!

Generally, there is “some” progress in the application, but you still have to manually correct the distance and the lack of statistics makes the application not very useful.

Egika

@Artus-Diver
I was just following up if the app is working as indended.
agree about usefulness…

thanasis

replacing a suunto app during workout is not always possible as the app shows that 2 S+ are in use. For instance i had coach pacer and fused zones and when trying to replace fused zones by setting te toggle off and adding another S+ i wasn’t able to do so. The workaround was to set it off, get out of the control panel and then add the other s+.

I think this was not the case with the previous iternarions

Mister PYC

@Artus-Diver said in Software Update 2.43.8/.12 (2025 Q2):

meone from Suunto IT will take some

For me BIG NUMBER are not big at all

I sent a suggestion to SUUNTO which you can find here
https://forum.suunto.com/topic/13208/coming-back-on-a-very-old-wished-enhancement-…-bigger-unique-info-for-impaired-people?_=1751908678891

In fact personnaly for swimming I need very basic informations like the distance, the time, what time it is …
this because I train myself during by lunch noon break so I have very limited time, and hence I need to just know how much I already swon and if I can still do a little bit more …

I tried big number … one time … useless … a second time again few month later … useless …
so hence I deciced to write this suggestion to SUUNTO .
For me BIG has to be SUPER BIG not just few pixels bigger !!!

When you swim, you are impaired, with teh fog on the glasses and below the water to read … you cannot read even when tehre is just 3 fields … you see blurry information

Let’s see …

MKPotts

My watch (a 9PP) has downloaded and installed the latest firmware, despite having “enable automatic updates” turned off. It did the same with the last firmware, overriding this setting after about 2 weeks and forcing the update. Does anyone know how I stop it doing this?

I’ve also noticed the watch is now defaulting to “custom” battery mode every time, even though I’ve never set a custom mode and default settings are the same as “performance”. (Maybe it was doing this before and I didn’t notice now that battery mode is hidden in the sub-menu.) Does it make any difference if it’s in custom or performance if the modifiable settings are the same?

Elipsus

@MKPotts THis is definitly not the first time that Suunto pushes an update despite the “automatic update” control being turned of, it really, really, really gives a bad vibe :

about device ownership
possible future “updates” that wreck our watches, like it happened before
worst case scenario would be like google “update” to their pixel 4a that halved the battery life for “safety”

Hey Suunto ! It’s 2025 ! Consent is not an option !

wzxecr

@ElectronBadger same on my Race S.
Was working before the update.
On running or custom sport mode, auto lap turned off, the field ‘current lap duration’ doesn’t show anything.
But the laps appear in the app after the activity

Dareo

@fv4500 FYI - I just got finished chatting with support and it appears to be a known issue

So hopefully the issue gets resolved soon.

enriqueescoms

@Dareo I hope Suunto is working on the non-touch-responsive navigation screen issue, too.

Dareo

@enriqueescoms Same here. Getting tired of having to constantly look at my watch while exercising to see if it’s frozen and needs a soft reset.

runsgrun

@atoponce said in Software Update 2.43.8/.12 (2025 Q2):

@sryke When I grab the FIT from the Suunto app and the FIT from Stryd, the exported power data comes out identically on both:
$ head -n 1 suunto-record.csv stryd-record.csv
==> suunto-record.csv <==
timestamp,position_lat,position_long,heart_rate,cadence,distance,power,temperature,vertical_speed,enhanced_speed,enhanced_altitude

==> stryd-record.csv <==
timestamp,position_lat,position_long,heart_rate,cadence,distance,power,temperature,vertical_speed,enhanced_speed,enhanced_altitude
$ awk -F ',' '{print $7}' suunto-record.csv | sha256sum
cc84c13b3cf058654c11449ec407c8d88d4b20e2fea432cda2374e13d89dafc5  -
$ awk -F ',' '{print $7}' stryd-record.csv | sha256sum
cc84c13b3cf058654c11449ec407c8d88d4b20e2fea432cda2374e13d89dafc5  -
But if I look at the data table in the Suunto app versus the data table in Stryd, I get two different wattage values for my 4×5:30 intervals this morning (yeah, I faded as the intervals progressed):

5:30 Int. # Suunto W Stryd W

1 329 335

2 321 329

3 318 324

4 313 319

Suunto screenshot

Stryd screenshot

I have the same issue, and I did a similar comparison based on 2 runs (a 60 minute and a 75-minute). The data are the split power, power-vs-time charts, and the average power reported by Suunto, Stryd and Strava.

The split power numbers on Suunto app showed consistently 2-3% lesser than that from Stryd.
The charts are identifcal.
For average power, Stryd and Strava reported same average and Suunto app reported about 2-3% lower. However, somehow the nominal power reported by Suunto app appears to be spot on with Stryd’s average power.

Anyway, I also experienced “jumpy” 3-sec average power reading on my Race S that I couldn’t rely on it for pacing. All these only happened after the latest update (2.43.8 and 2.43.12). I assume Suunto engineers are working hard on it and it is prioritized high up in their backlog.

sryke

@sryke said in Software Update 2.43.8/.12 (2025 Q2):

This is so strange, after yesterday’s perfect alignment between Race S fit file wattage and Stryd pod fit file wattage, it’s back to non-alignment, today.

I haven’t done anything differently.

Race S (green), Stryd (brownish)

Thanks to advise given here in the thread I was able to reinstall the previous firmware on my Race S.

All runs so far show the same wattage in the Race S fit file and the Stryd pod fit file.

However, the watch still shows these drop outs starting at about 10min into a run.

VoiGAS

@sryke Interesting comparsion, thank you! So it seems to be normal that Suunto Power is not as flattened as Stryd. I find it extremly wobbly, also during the run. Jumpung between 100 Watt and 200 Watt and back from one second to another.
I noticed it with the current firmware, but maybe it was also like this before

runsgrun

@VoiGAS said in Software Update 2.43.8/.12 (2025 Q2):

@sryke Interesting comparsion, that you! So it seems to be normal that Suunto Power is not as flattened as Stryd. I find it extremly wobbly, also during the run. Jumpung between 100 Watt and 200 Watt and back from one second to another.
I noticed it with the current firmware, but maybe it was also like this before

I did notice dropout of power data with the older firmware but those instances were very sharp dips and the numbers recovered almost instantly. I attribute such this to the Bluetooth connection with the Stryd pod being interrupted and these didn’t affect the overall readings much.

Antoine

@Antoine said in Software Update 2.43.8/.12 (2025 Q2):

I don’t know if i was already mention but i have 2 remarks and sur if is is the normal behavior:

• Raising your wrist : OFF
=> but during activities the backlight is activated when raising wrist (it seems it wasn’t the case some times ago)
• custom battery mode
=> it is always selected by default even if the configuration is exactly the same as perfo mode

Nobody had the same problem on custom battery mode ?
How to solve it ?
Thanks !

sryke

@runsgrun said in Software Update 2.43.8/.12 (2025 Q2):

@VoiGAS said in Software Update 2.43.8/.12 (2025 Q2):

@sryke Interesting comparsion, that you! So it seems to be normal that Suunto Power is not as flattened as Stryd. I find it extremly wobbly, also during the run. Jumpung between 100 Watt and 200 Watt and back from one second to another.
I noticed it with the current firmware, but maybe it was also like this before

I did notice dropout of power data with the older firmware but those instances were very sharp dips and the numbers recovered almost instantly. I attribute such this to the Bluetooth connection with the Stryd pod being interrupted and these didn’t affect the overall readings much.

But these dropouts shown on the watch do not show up in the fit file. My Race S fit file and the Stryd pod fit file were the same for me (in the cases where there is no overall disagreement of the readings). I don’t see any dropouts in the fit file.

Pavlas

The dissatisfaction over the new maps has been mentioned several times already. Especially the disappearing paths when zooming out more.
I did a comparison of how the different zooms look in the city. Only the 200m zoom is the same. But the 100m and 50m zooms look the worst in my opinion. Only the 500 m zoom seems clearer to me.
It doesn’t look that bad in the open. But when the dashed roads turn to white background at 50m and 25m zoom, it looks like I’m walking on a big road.
Judge for yourself.
I probably don’t need to mention that the new maps are on the left watch.

Tieutieu

@Pavlas Thanks for comparison.
I mostly use 100m zoom (for trail running) and 200m (for cylcing).
at 100m expecially, I find the new layer easier to follow. Small tracks are more visible.

runsgrun

@sryke

This is the combined chart of power data from Stryd’s (magenta) vs Race-S’s (blue) fit files. About 5 dropouts over 66 minutes. Sometimes none, sometimes more. Other than these and the sight offset due to different start times, the data points matched nicely.

Pavlas

@Tieutieu Yes, the new maps are a bit better in the open. But there are also 2 kinds of paths. Short dashes and long dashes. My comparisons are just the paths that are marked with short commas, and those aren’t very nice. In the city, it makes it look very cluttered. It would be good to find a compromise.